Commax DRC-40CK User manual

@Color Door Camera
Model No. : DRC-40CK
①White LED & illumination sensor : Offer clear image at night
②Microphone : It delivers voice from a visitor
③Camera lens : Transferring image
✽It should be kept clean
④Call button : Call a residence
⑤Speaker : It delivers voice to a visitor
⑥Screw Hole
⑦Door Release connection terminal
⑧Mointor connection terminal
⑨Wall Bracket
Overview
⑦
⑧
⑨
⑥
12 34
Door camera Bracket Camera fixing screw Braket fixing screw
Package contents

SCREW M3
SCREW T4 (2EA)
[FIG-1]
DRC-40CK
DC 12V (Supplied to monitor)
4 wires (polarity) to a monitor
2 wires (non-polarity) to a electric door lock
CMOS IMAGE SENSOR
Full duplex
NTSC STANDARD.
0.1 Lux (within 300mm)
Embedded white LED (night working)
Horizontal 75°, Vertical 55°
Upward 13
-10℃~ +40℃
300g
101(W) x 142(H) x 32(D)
Diameter(pie)
0.5 0.65 0.8 1
Distance(meter) 28m 50m 70m 115m
Model No.
Rated Voltage
Wiring
Sensor Type
Transmission
Color Television
Minimum Illumination
LED
Effective Viewing Angle
Angle Adjustment
Operating Temperature
Weight (g)
Dimension (mm)
Installation between a door
camera and a monitor(TIV Cable)
Wiring
Specification
Installation
1. Fix a bracket on a wall with screws
2. Wiring #1, 2, 3, 4 on the back side of a dooor camera with a monitor
as shown in [FIG-2]
(#1 : VOICE, #2 : GND, #3 : DC12V, #4 : VIDEO)
3. Put a door camera unit into a wall bracket
4. Wire door release connection terminal as shown in [FIG-2]
5. Tighten a screw at the bottom side of a door camera. [FIG-1]
Door Release
Power Source
Door Release Cable
Monitor Cable
513-11, Sangdaewon-dong, Jungwon-gu, Seongnam-si, Gyeonggi-do, Korea
Int’l Business Dept. : Tel.; [phone]~550 Fax.; [phone]
Web site : www.commax.com
Printed In Korea / 2008.03
[FIG-2]