Comodita Tipo stand up User manual

USER GUIDE 1-10
GUIA DEL USUARIO 11-20
COMPACT UPRIGHT
ROLLING WALKER
CAMINADOR
VERTICAL COMPACTO
CON RUEDAS
model number: COM 930

About your COMODITÀ Tipo Stand Up Rolling Walker
COMODITÀ is a company concerned with your comfort, safety
and mobility. Our products will simplify your movements, offering
support and safety for your daily activities, helping you do what
you want, when you want it.
The modern patented design and sturdy construction of the
COMODITÀ Tipo Stand Up Rolling Walker (ref. COM 930) make it
one of the safest and most stylish walkers in the market.
Built to support weights of up to 300 lbs., it is tested and approved
under international testing standards for walkers and rollators.
The COMODITÀ Tipo Stand Up Rolling Walker is built with high-
quality materials to ensure your safety.
In addition, the COMODITÀ Tipo Stand Up Rolling Walker comes
with the exclusive COMODITÀ Pisa removable cup holder, cane
holder and washable nylon shopping bag, as well as a convenient
travel bag.
The COMODITÀ Tipo Stand Up Rolling Walker has two 12”
aluminum front wheels, with pneumatic tires, and two 10” back
wheels, also with pneumatic tires. That makes your COMODITÀ
Stand Up perfect for indoor and outdoor use, on just about all
kinds of surfaces.
1

Main Features:
•Extra-large 10”aluminum front wheels and 8”rear wheels
with pneumatic tires, for safer indoor and outdoor use
•Wide, comfortable nylon seat
•Adjustable handle height
•Padded ergonomic backrest
•Convenient removable cup holder
•Cane holder included
•Convenient transport nylon bag
•Hand brake locks for safety while sitting
•Double-fold construction makes it very compact and easy
to transport
•Four light reflectors at the front and two at the back for
additional safety
•Nylon shopping bag with light reflecting straps for added
security
Product Dimensions and Specifications
•Unit weight: 23.5 lb (10.7 kg)
•Weight capacity: 300 lb (136 kg)
•Recommended user height: 5' to 6' (1,52 m to 1,82 m)
•Overall height: 40” / 46” (101.5 cm / 116.0 cm)
•Overall length: 28” (72 cm)
•Overall width: 25” (63.5cm)
•Folded measurements: 35”x 16”x 15”
•Front wheel diameter: 10” (25 cm)
•Back wheel diameter: 8” (20 cm)
•Seat height from floor: 21” (53 cm)
•Seat depth: 11” (28.5 cm)
•Seat width: 17½” (44 cm)
•Size of nylon bag: 17” W, 8” D, 10” H (43cm W, 20cm D,
25cm H)
2

Assembly Instructions
Assembling your COMODITÀ Tipo Stand Up Rolling Walker is
extremely simple! You can also watch the assembly video at
www.comoditausa.com for more instructions.
1. Carefully remove the walker from the shipping carton.
2. Place the rollator on a flat surface.
3. Raise the handles to the upright position.
4. Lock the frame on both sides by bringing the folding lock
lever (pic 1) up 180 degrees, so it points up (pic 2). Turn
the folding lever 90 degrees towards the back wheel, so
it slides into the folding lock lever plastic support (pic 3).
Note: You can only slide the folding lock lever into the
plastic support if it is in the correct position, as seen in
the pictures below.
PIC 1 PIC 2 PIC 3.
3

5. Release the plastic locking device that holds the walker
folded.
6. Insert both handles into the frame of the walker and
tighten the knob (see handle height adjustment below).
7. Open the walker and lock it in the opened position by
pushing down the sides of the seat onto the main frame
until you hear a click.
4

8. Adjusting the height of the handle:
•Untighten the plastic knob on the frame.
•Adjust the handle at the desired height.
•Tight the plastic knob on the frame to lock the
handle at the desired height.
9. Adjusting the position of the handle:
•You can adjust the brake handles vertical position
to your most comfortable position by unlocking
the locking knob.
•You can also adjust the distance of the brake
handle from the arm support.
10. Adjusting the height of the backrest:
5

11. Insert both sides of the nylon bag elastic strap into the
nylon bag plastic support.
12. Secure the brake cables together in front of the walker.
You will find a small Velcro strap that will allow you to tie
the brake cables together.
13. Insert the cup holder into its plastic support on the side of
the walker.
IT IS THAT SIMPLE! NO TOOLS, NO LOOSE PARTS!
6

Operating Instructions
TO WALK:
•Position yourself behind the walker and hold both handles
firmly.
•Roll your walker slowly forward so that the rear wheels are a
few inches ahead of your body.
•While maintaining a steady and safe roll forward, place your
foot in line with the rear wheels.
•Repeat the movement with your other foot.
•To slow down, slowly squeeze the brake handles towards you.
•To lock the brakes, push forward the brake handles until the
brakes “click” into locked position. Do not push it any further
than this point.
•To unlock the brakes and resume walking, pull back the brake
handles until you hear a “click.”
TO USE THE SEAT OF YOUR WALKER:
•Make sure your walker is in a flat surface, not on an incline.
•LOCK the brakes before sitting.
•Make sure your feet rest flat on the ground.
7

Care and Maintenance
PERIODIC BRAKE ADJUSTMENT
To adjust the sensitivity of the brake:
•To tighten the brake (reduce the gap between the brake
pad and wheel) rotate the adjusting nut clockwise.
•To loosen the brake (increase the gap between the brake
and the wheel) rotate the adjusting nut counterclockwise.
WARNING!
•Over adjustment of the brake might prevent the wheels from
moving freely.
•Under adjustment of the brake may cause the brake pad not
to engage at all.
•DO NOT USE WALKER IF BRAKES ARE NOT WORKING PROPERLY.
8