Concourse TRAVEL GUARD CBM3 User manual

CBM3
INSTRUCTION
MANUAL
TRAVEL GUARD

In the kit provided you
will find the following
components (fig 1) to be
fitted to the section of the
buggy (fig 2).
Travel guard.
Fig. 1 Travel guard kit parts
Fig. 2 Travel guard fitted to buggy
Travel guard
Screw driver

Place your bag and buggy
on a flat surface and open
until the handle is sitting
parallel to the ground
(fig 3).
Note: It is important that
the buggy is open in this
exact position in order to
fit the new travel guard.
It is important to
understand that the small
protruding edge on the
travel guard marked “A”
must fit into the opening
marked “B” (fig 4).
Fig. 4 Line up travel guard as indicated
Fig. 3 Open handle
Handle parallel to ground,
resting on leg.
B
A

Place section A into
section B as indicated by
arrows and apply pressure
with your thumb (fig 5).
While continuing to apply
downward pressure with
your thumb, using the
screwdriver provided,
carefully guide section “A”
into section “B” (fig 6).
Fig. 5 begin to fit travel guard
Fig. 6 Guide travel guard with screwdriver
Apply pressure
Apply pressure
Fit “A” and “B” together
Guide into “B”

Fig. 7 Fit top of travel guard to buggy
Fig. 8 Travel guard fitted to buggy
Once section “A” has been
successfully inserted into
section “B” you will be
able to complete the
fitting process by locking
over the top tab of the
travel guard (fig 7).
You have now completed
the process and the
buggy should look like
this (fig 8).
Top tab locked over buggy

To see the CBM3 in action
visit concoursegolf.com