Condair CP3MINI User manual

2549076 EN 1204
Condair CP3mini
OPERATING INSTRUCTIONS
Electrode Humidifiers

3
1 Introduction 4
1.1 To the very beginning 4
1.2 Notes on the operating instructions 4
2 For your safety 6
3 Product Overview 8
3.1 Models overview 8
3.2 Identicationoftheunit 8
3.3 Steamhumidierconstruction 9
3.4 Functional description 11
3.5 Humidicationsystemoverview 12
4 Operation 14
4.1 Commissioning 14
4.2 Notes on operation 15
4.2.1 Functionofthedisplayandoperatingelements 15
4.2.2 Remoteoperatingandfaultindication 16
4.2.3 Inspectionsduringoperation 16
4.2.4 Carryingoutmanualdraining 16
4.3 Takingtheunitoutofoperation 17
4.4 Overviewandoperatingofthemenu 18
4.5 Interrogationfunctions 19
4.5.1 Interrogationoftheoperatinginformation
intheindicationlevel 19
4.5.2 Interrogationofunitinformation 20
4.5.3 Interrogationofthemalfunctionlist 21
4.6 Unitsettings 22
4.6.1 Launchingtheunitsettingsmenu 22
4.6.2 Selectingthedialoguelanguage 22
4.6.3 Controlsettings 23
4.6.4 Conguringthecapacitylimitation 27
4.6.5 ConguringtheOn/Offtimer 29
4.6.6 Activating/Deactivatingfaultcurrentrelayoperation 30
4.6.7 Watermanagementsettings 30
4.6.8 Performingremoterelaytests 32
4.6.9 Settingthedate 33
4.6.10 Settingthetime 33
4.6.11 ConguringthedisplayandthesteamLED 33
5 Maintenance 36
5.1 Importantnotesonmaintenance 36
5.2 Maintenancelist 37
5.3 Removingandinstallingpartsformaintenance 38
5.3.1 Removalandinstallationofthesteamcylinder 38
5.3.2 Disassemblyandassemblyofthecomponents
ofthewatersystem 40
5.4 Notes on cleaning the unit components 41
5.5 Notes on cleaning agents 42
5.6 Resettingthemaintenanceindication 42
6 Fault elimination 43
6.1 Faultindication 43
6.2 Malfunctionlist 44
6.2.1 Systemfaults 44
6.2.2 Unitfaults 45
6.3 Resettingtheerrorindication(redLEDlights) 47
6.4 Notesonfaultelimination 47
6.5 Replacingthebackupbatteryonthecontrolboard 48
7 Taking out of service/Disposal 49
7.1 Takingoutofservice 49
7.2 Disposal/Recycling 49
8 Productspecications 50
8.1 Technicaldata 50
8.2 Wiring diagram Condair CP3mini 51
Contents

4
Limitation
The subject of these operating instructions is the steam humidier Condair CP3mini in its dif-
ferent versions. The various accessories are only described insofar as this is necessary for proper
operation of the equipment. Further information on accessories can be obtained in the respective
instructions.
These operating instructions are restricted to the commissioning, operation, servicing and trouble
shooting of the steam humidier Condair CP3mini and is meant for well trained personnel being
sufciently qualied for their respective work.
The operating instructions is supplemented by various separate items of documentation (spare parts
list, manuals for accessories, etc.). Where necessary, appropriate cross-references are made to
these publications in the operating instructions.
1 Introduction
We thank you for having purchased the steam humidier Condair CP3mini.
The steam humidier Condair CP3mini incorporates the latest technical advances and meets all rec-
ognized safety standards. Nevertheless, improper use of the Condair CP3mini may result in danger
to the user or third parties and/or impairment of material assets.
To ensure a safe, proper, and economical operation of the steam humidier Condair CP3mini, please
observe and comply with all information and safety instructions contained in the present manual as well
as the instructions given in the manuals for the components used in the humidication system.
If you have questions, which are not or insufciently answered in this documentation, please contact
your Condair supplier. They will be glad to assist you.
1.2 Notes on the operating instructions
1.1 To the very beginning

5
Symbols used in this manual
CAUTION!
The catchword “CAUTION” designates notes in this documentation that, if neglected, may cause
damage and/or malfunction of the unit or other material assets.
WARNING!
The catchword “WARNING” used in conjunction with the general caution symbol designates safety
and danger notes in this documentation that, if neglected, may cause to injury to persons.
DANGER!
The catchword “DANGER” used in conjunction with the general caution symbol designates safety
and danger notes in this documentation that, if neglected, may lead to severe injury or even
death of persons.
Safekeeping
Please safeguard these operating instructions in a safe place, where it can be immediately accessed.
If the equipment changes hands, the documentation should be passed on to the new operator.
If the documentation gets mislaid, please contact your Condair supplier.
Language versions
These operating instructions are available in various languages. Please contact your Condair sup-
plier for information.
Copyright protection
The present operating instructions are protected under the Copyright Act. Passing-on and reproduc-
tion of the manual (or part thereof) as well as exploitation and communication of the contents are
prohibited without written permission by the manufacturer. Violation of copyright terms is subject to
legal prosecution and arises liability for indemnication.
The manufacturer reserves the right to fully exploit commercial patent rights.

6
2 For your safety
General
Every person working with the Condair CP3mini must have read and understood the operating in-
structions before carrying out any work.
Knowing and understanding the contents of these operating instructions is a basic requirement for
protecting the personnel against any kind of danger, to prevent faulty operation, and to operate the
unit safely and correctly.
All ideograms, signs and markings applied to the unit must be observed and kept in readable
state.
Qualication of personnel
All actions described in the present operating instructions (operation, maintenance, etc.) must be
carried out only by well trained and sufciently qualied personnel authorised by the owner.
For safety and warranty reasons any action beyond the scope of this manuals must be carried out
only by qualied personnel authorised by the manufacturer.
It is assumed that all persons working with the Condair CP3mini are familiar and comply with the
appropriate regulations on work safety and the prevention of accidents.
Intended use
The steam humidier Condair CP3mini is intended exclusively for air humidication via a steam
distributor approved by the manufacturer (unit versions Condair CP3mini PD..) or via the in-
tegrated ventilation unit (unit versions Condair CP3mini PR..)within the specied operating
conditions (see chapter 8 “Product specications”). Any other type of application without the express
written consent of the manufacturer is considered as not conforming with the intended purpose and
may lead to the Condair CP3mini becoming dangerous.
Operation of the equipment in the intended manner requires that all the information in these in-
structions is observed (in particular the safety instructions).

7
Danger that may arise from the unit
– The Condair CP3mini is mains powered.
DANGER!
One may get in touch with live parts when the unit is open. Touching live parts may cause
severe injury or danger to life.
Prevention: Before carrying out any work set the Condair CP3mini out of operation as described
in chapter 4.3 (switch off the unit, disconnect it from the mains and stop the water supply) and
secure the unit against inadvertent power-up.
– The Condair CP3mini produces steam. When producing steam, the steam cylinder inside
the humidier gets very hot (up to 100 °C).
WARNING!
If the unit is opened immediately after having produced steam there is danger of burning
when touching the steam cylinder.
Prevention: Before carrying out any work set the Condair CP3mini out of operation as de-
scribed in chapter 4.3, then wait until the evaporation unit has cooled down sufciently thus
preventing danger of burning.
Behaviour in case of danger
If it is suspected that safe operation is no longer possible, then the Condair CP3mini should im-
mediately be shut down and secured against accidental power-up according to chapter 4.3.
This can be the case under the following circumstances:
– if the Condair CP3mini or its mains cable is damaged
– if the Condair CP3mini is no longer operating correctly
– if connections and/or piping are not sealed
All persons working with the Condair CP3mini must report any alterations to the unit that may affect
safety to the owner without delay.
Prohibited modications to the unit
No modications must be undertaken on the Condair CP3mini without the express written consent
of the manufacturer.
For the replacement of defective components use exclusively original accessories and spare parts
available from your Condair supplier.

8
3 Product Overview
3.1 Models overview
Steam air humidiers Condair CP3mini are available in the two basic versions for duct air humidi-
cation and direct room air humidication with different heating voltages and steam capacities
of 2 kg/h and 4 kg/h.
Model Condair CP3mini
Duct Room
PD2 PD4 PR2 PR4
Max. steam capacity 2 kg/h 4 kg/h 2 kg/h 4 kg/h
Heating voltages 230V1~ / 50..60Hz
240V1~ / 50..60Hz
200V2~ / 50..60Hz
Integrated ventilation unit ––– X
Display and control unit X
External On/Off control X
External P/PI control X
Internal P/PI controller X
Admissible control signals 0–5V, 1–5V, 0–10V, 2–10V,
0–16V, 3.2–16V, 0–20mA, 4–20mA
Operating parameter congurable via control software
3.2 Identication of the unit
The identication of the unit is found on the type plate (for the location of the type plate see unit
overview):
Type designation Serial number (7 digits) Month/Year
Heating voltage
Maximum steam capacity
Admissible water supply pressure
Power consumption
Control voltage
Field with certication symbols
CondairAG,CH-8808Pfäfkon
Type:CP3miniPD4 Ser.Nr.: XXXXXXX 06.09
HeatingVoltage:230V/1~/50...60Hz Power:3.1kW/13.5A
SteamCapacity:4.0kg/h Ctrl.Voltage:230V/1~/50...60Hz
WaterPressure:1...10bar
MadeinSwitzerland

9
3.3 Steam humidier construction
1 Back panel
2 Water cup
3 Water supply hose
4 Heating electrodes
5 Filling hose
6 Overow hose
7 Steam cylinder
8 Inlet valve (not visible)
9 Drain pump
10 Water drain connector (not visible)
11 Water supply connector (not visible)
12 Tub
13 Power board
14 Type plate
15 Remote operating and fault indication board
(Option)
16 Control board with CF card
17 Unit switch
18 Drain key
19 Display and control unit
20 Operation status indicators (LED's)
21 Intermediate panel
22 Front cover
23 Level sensor
24 Steam outlet connector
1
2
4
5
7
6
9
3
17 13 1214 101516
23
22
21
24
11
19
18
20
8
Construction Condair CP3mini PD2/PD4

10
Construction Condair CP3mini PR2/PR4
1 Back panel
2 Water cup
3 Water supply hose
4 Heating electrodes
5 Filling hose
6 Overow hose
7 Steam cylinder
8 Inlet valve (not visible)
9 Drain pump
10 Water drain connector (not visible)
11 Water supply connector (not visible)
12 Tub
13 Power board
14 Type plate
15 Remote operating and fault indication board
(Option)
16 Control board with CF card
17 Unit switch
18 Drain key
19 Display and control unit
20 Operation status indicators (LED's)
21 Unit intermediate panel
22 Front cover
23 Level sensor
24 Condensate hose
25 Ventilation unit
1
2
4
5
7
6
9
3
17 13 1214 101516
23
22
21
24
25
11
19
18
20
8

11
3.4 Functional description
The steam humidier Condair CP3mini is a pressureless steam generator that utilizes an electrode
heating. The steam humidier Condair CP3mini is designed for air humidication via a steam distribu-
tor (unit versions Condair CP3mini PD..) or via the integrated ventilation unit (unit versions Condair
CP3mini PR..).
Steam generation
Any time steam is requested, the electrodes are supplied with voltage. Simultaneously, the inlet valve
opens and water enters the steam cylinder from the bottom via water cup and supply line. As soon
as the electrodes come in contact with the water, current begins to ow between the electrodes,
eventually heating and evaporating the water. The more the electrode surface is exposed to water,
the higher is the current consumption and thus the steam capacity.
Upon reaching the requested steam capacity, the inlet valve closes. If the steam generation de-
creases below a certain percentage of the required capacity, due to lowering of the water level (e.g.
because of the evaporation process or drainage), the inlet valve opens until the required capacity
is available again.
If the required steam capacity is lower than the actual output, the inlet valve is closed until the desired
capacity is achieved by lowering of the water level (evaporation process).
Level monitoring
A sensor provided in the steam cylinder cover detects when the water level gets too high. The mo-
ment the sensor comes in contact with water, the inlet valve closes.
Drainage
As a result of the evaporation process, the conductivity of the water increases due to an escalating
mineral concentration. Eventually, an inadmissibly high current consumption would take place if this
concentration process were permitted to continue. To prevent this concentration from reaching a
value, unsuitably high for the operation, a certain amount of water is periodically drained from the
cylinder and replaced by fresh water.
Control
The steam production can be controlled steplessly via the internal or an external continuous controller
or with an On/Off control via an external humidistat.

12
3.5 Humidication system overview
1 Steam humidier
2 Steam connector
3 Water supply connector
4 Water drain connector
5 Filter valve (accessory “Z261”)
6 Manometer (installation recommended)
7 Funnel with siphon (building side)
8 Water drain hose (accessory “DS22”)
9 Connecting cables
10 Steam hose (accessory “DS22”)
11 Condensate hose (accessory “KS10”)
12 Steam distribution pipe (accessory “41-...”)
13 Steam nozzle (accessory “W21”)
System overview Condair CP3mini PD2/PD4
DS22
7
–
–
–
–
–
+
–
8
1
2
4
Z261
9
10
41-..
11
DS22
KS10
KS10
11
12
41-.. 12
W21
13
W21
13
3
5
6
125...1250µS/cm
1...10bar
1...40°C
min.10%
min.10%
≥40mm
min.50cm
ø22 mm
G3/4"
G3/8"
min.300mm
min.20%
min.10%
min.10%
min.5%
min.5%
Rmin.300mm
Rmin.300mm
Ømin.200mm
Ømin.200mm
Pmax.800Pa
Pmin.-800Pa
Pmax.800Pa
Pmin.-800Pa

13
System overview Condair CP3mini PR2/PR4
1 Steam humidier
2 Ventilation unit
3 Water supply connector
4 Water drain connector
5 Filter valve (accessory “Z261”)
6 Manometer (installation recommended)
7 Funnel with siphon (building side)
8 Water drain hose (accessory “DS22”)
9 Connecting cables
–
–
DS22
8
7
1
2
6
Z261
9
5
3
4
125...1250µS/cm
1...10bar
1...40°C
min.10%
min.10%
≥40mm
min.50cm
ø22 mm
G3/4"
G3/8"

14
4 Operation
Proceed as follows when putting the unit into operation:
1. Examine the steam humidier and installation for possible damage.
DANGER!
Damaged devices or devices with damaged installation may present danger to human life or
cause severe damage to material assets.
Damaged units and/or units with damaged or faulty installation must not be operated.
2. Check whether the front panel is mounted and xed with the screw.
3. Open the lter valve (or the shut-off valve, respectively) in the water supply line.
4. Verify the set humidity value at the humidity controller or at the humidistat, and readjust as re-
quired.
5. Switch on the service switch for mains supply.
6. Actuate the unit switch of the steam humidier. Switch lights up.
4.1 Commissioning
The steam humidier carries out a system test, during which all the LEDs
light up and the opposite display is shown.
If a failure occurs on the system test, a corresponding error message is
shown in the display.
After the system test the unit is in normal operation mode. The display
shows the standard operating display (rst page of the indication level).
Note: The contents of the standard operating display depends on the actual
operating status and on the conguration of the Condair CP3mini and can
differ from the opposite display.
As soon as the humidity controller or the humidistat requires humidity, power
is switched on for heating. The inlet valve opens (slight delay) and the steam
cylinder lls with water. As soon as the submerged electrodes heat the water
up the green LED lights up and after a few minutes (approx. 5–10 minutes,
depending on the conductivity of the water) steam is produced.
Note: If the Condair CP3mini is operated with water of low conductivity it may happen that the
maximum steam capacity is not reached in the rst few hours of operation. This is normal. As soon
as the conductivity has reached a sufcient level (due to the vaporisation process) the humidier
will reach the maximum steam capacity.
Standby
CP3 PD4 230V2
14.06.2009 12.00.00
Menu Set
STARTUP:
CP3 PD4 230V2
INIT MODULE
Demand :100%
CP3 PD4 230V2
14.06.2009 12.00.00
Menu Set

15
4.2 Notes on operation
4.2.1 Function of the display and operating elements
Display and control unit
Function: Conguration of the Condair CP3mini
Indication of operating parameters
Reset of maintenance counter
red LED “Error”
Function: The LED ashes in case of a temporary malfunction
of the unit (Warning status). Further operation of the
unit is still possible. The warning message is shown
in the display, see chapter 6).
The LED lights in case of a severe malfunction of the
unit (Fault status). Further operation is not possible
any longer. The fault message is shown in the display,
see chapter 6).
The LED ashes alternately with the green LED if
the external safety chain (ventilation interlock has
triggered) is open. As soon as the safety chain is
closed again, the indication disappears.
yellow LED “Maintenance”
Function: The LED lights if the steam cylinder must be re-
placed.
green LED “Steam”
Function: The LED lights if the unit produces steam.
The LED ashes alternately with the red LED if
the external safety chain (ventilation interlock has
triggered) is open. As soon as the safety chain is
closed again, the indication disappears.
Drain key
Function: Starting and stopping manual draining of the steam
cylinder.
Unit switch
Function: Switches the unit on and off. The switch is illuminated
when the unit is running.

16
4.2.3 Inspections during operation
During operation the Condair CP3mini and the humidication system have to be inspected weekly.
On this occasion check the following:
• the water and steam installation for any leakage.
• the steam humidier and the other system components for correct xing and any damage.
• the electric installation for any damage.
If the inspection reveals any irregularities (e.g. leakage, error indication) or any damaged components
take the Condair CP3mini out of operation as described in chapter 4.3. Then, contact your Condair
representative.
4.2.4 Carrying out manual draining
Proceed as follows to drain the unit manually:
Briey press the drain key.
The heating voltage is interrupted and the drain pump starts. As long as the
manual drain cycle is in progress the three LED light up successively.
To stop the drain cycle press the drain key again.
To Stop Press
Manual Drain
Manual Drain Key!
Menu Set
4.2.2 Remote operating and fault indication
If your unit is equipped the optional remote operating and fault indication PCB the following operat-
ing status are shown remotely:
Activated remote
indication relay
When? Display on unit
“Error” A error is present, further operation
is normally not possible any longer,
the heating voltage is interrupted.
Red LED lights and an error mes-
sage is shown in the display.
“Service” The steam cylinder is spent and
must be replaced. The unit remains
operational for a certain time.
Yellow LED lights and the service
warning message is shown in the
display.
“Steam” Steam demand/Steam production Green LED lights and the standard
operating display is shown.
“Unit on” Unit is switched on. Unit switch lights and the standard
operating display is shown.

17
4.3 Taking the unit out of operation
In order to take the Condair CP3mini out of operation, perform the following steps:
1. If the unit has to be switched off because of a malfunction, please note the error code of the actual
error message shown in the display.
2. Close the shut-off valve in the water supply line
3. Start manual draining (see chapter 4.2.4) and wait until the steam cylinder is empty.
4. Actuate the unit switch on the bottom of the unit.
5. Disconnect steam humidier from the mains: Switch off the service switch to mains supply
and secure the switch in “off” position against accidentally being switched on, or clearly mark the
switch.
WARNING!
If steam was produced just before the unit is taken out of operation, wait before opening the
unit and let the steam cylinder cool down to prevent danger of burning.

18
4.4 Overview and operating of the menu
The operating and display unit is operated via the four keys located just
below the display. The 4 status elds at the bottom of the display show the
active keys the functions assigned to them.
Menu overview
actual key setting
keys
Indication level
Menu level
Operating
Menu Info
– Interrogation of unit information
– Interrogation of the malfunction list
Menu User
– Resetting the maintenance counter
– Unit settings
Standby
CP3 PD4 230V2
XXXXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXXXXX
14.06.2009 12.00.00
Menu Set
Demand :50%
CP3 PD4 230V2
14.06.2009 12.00.00
Menu Set
Software :1.00LA00
CP3 PD4 230V2
Controlsign.:0-10V
Limitsignal :0-10V
Menu Set
Drain Factor:1.0
CP3 PD4 230V2
Conductivity:>125µS
StandbyDrain:Full
Force Drain :O
Menu Set
Timer
CP3 PD4 230V2
On/O Timer :O
Power Limit :O
Hum.Setpoint:O
Menu Set
Power Limit :100%
CP3 PD4 230V2
Demand :0%
∑ Steam :0.0kg/h
Menu Set
Operating Hours
CP3 PD4 230V2
Cylinder :40h
Menu Set
Main Menu
User :Set
Info :Set
Esc Set
Info
ErrorHistory:Set
Unit Status :Set
Esc Set
Main Menu
User :Set
Info :Set
Esc Set
User Code
Enter Number
Conrm with Set
Esc Set
8808
User
Settings :Set
Maintenance :Set
Esc Set

19
4.5 Interrogation functions
4.5.1 Interrogation of the operating information in the indication level
In the normal operating mode the operating and display unit is in the indication level. The indication
level forms a loop that includes several pages holding operating information which can be accessed
with the arrow keys. The various displays of the indication level are shown below.
Info page 1: standard operating display
The appearance of the standard operating display depends on the actual operating status and the
conguration of the Condair CP3mini. The following display are possible.
Note: if the optional radio humidity sensor and/or the “Time-Off” function for the steam LED is/are
activated the sensor symbol and/or the crossed out LED symbol is/are shown in the upper right
corner of the standard operating display.
Demand :50%
CP3 PD4 230V2
Lim. Control:80%
14.06.2009 12.00.00
Menu Set
Standard operating display with control via the external controller
– Standby (no humidity demand) or Demand % (humidity demand present)
– Set supply air limitation in % *
* this parameter appears only if external supply air limitation is activated
Act.Humidity: 75%rH
CP3 PD4 230V2
Hum.Setpoint: 50%rH
Lim.Humidity: 60%rH
Lim.Range : 70-90%
Menu Set
Standard operating display with control via the internal controller
– Actual humidity in %rh
– Set nominal humidity %rh
– Set supply air limitation in % **
– Set range for supply air limitation in % **
** these parameters appear only if internal supply air limitation is activated
Info page 2: settings
Software :1.00LA00
CP3 PD4 230V2
Controlsign.:0-10V
Limitsignal :0-10V
Menu Set
– Software version (1.00)/language version (LA00)
– Set control signal range (signal Y) or radio humidity sensor
– Set control signal range for the supply air limitation (signal Z). Appears
only if supply air limitation is activated.
Info page 3: performance data
Power Limit :100%
CP3 PD4 230V2
Demand :0%
∑ Steam :0.0kg/h
Menu Set
– Set power limitation in % of the maximum capacity
– Actual humidity demand in % of the maximum capacity
– Actual steam capacity of the unit in kg/h
Info page 4: operating hours
Operating Hours
CP3 PD4 230V2
Cylinder :40h
Menu Set
– Operating hours since the last reset.
Info page 5: drain settings
Drain Factor:1.0
CP3 PD4 230V2
Conductivity:>125µS
StandbyDrain:Full
Force Drain :O
Menu Set
– Set drain factor
– Conductivity of the water
– Set draining type in standby operation
– Set time interval for forced draining
Info page 6: timer settings
Timer
CP3 PD4 230V2
On/O Timer :O
Power Limit :O
Hum.Setpoint:O
Menu Set
– Actual status of On/Off timer
– Actual status of power limit timer
– Actual status of humidity setpoint timer (appears only if internal P/PI
controller is activated)

20
Remote Error
O
Remote Unit On
O
Average Drain Time
0.0 s
Max. Level Sensor
O
Max. Level Counter
0
Inlet Valve
O
Outlet Pump
O
Main Contactor
O
Average Request
100%
Remote Service
O 12.00.00
3
4
5
6
7
9
8
12
11
10
RF Hum. Addr
1
RF Hum. Status Addr 1
Init
RF Hum. Status Addr 2
Valid 46%rH
RF Hum. Status Addr 3
Bat. Low 46%rH
RF Hum. Status Addr 4
No Conn.
Fan Speed
0
13
14
15
16
17
18
4.5.2 Interrogation of unit information
Press < > and < > keys, in order to select the unit information available in the list:
1 Total operating hours since the initial commissioning.
2 Actual status of the remote indication relay “Steam”
3 Actual status of the remote indication relay “Service”
4 Actual status of the remote indication relay “Error”
5 Actual status of the remote indication relay “Unit on”
6 Calculated mean drain time in seconds
7 Current average request
8 Actual status of the maximum level sensor
9 Counter showing the number of times the maximum level in the steam cylinder has been ex-
ceeded
10 Actual status of the inlet valve
11 Actual status of the drain pump
12 Actual status of the switch relay
13 Current number of revolutions of the fan (appears only with units type PR..)
14 Current set address of the radio humidity sensor
15 Actual signal on address 1of the radio humidity sensor
16 Actual signal on address 2of the radio humidity sensor
17 Actual signal on address 3of the radio humidity sensor
18 Actual signal on address 4of the radio humidity sensor
Press the <Esc> key several times to quit the unit information list and to return to the standard op-
erating display.
Unit Status
300h
Remote Steam
O
System Operation Hour
11.11.2006 12.00.00
Esc Set
Standby
CP3 PD4 230V2
16.06.2009 12.00.00
Menu Set
Main Menu
User :Set
Info :Set
Esc Set
Info
ErrorHistory:Set
Unit Status :Set
Esc Set
1
2
Select the list with the unit information:
Path: Main menu > Info > Unit Status