Confer Plastics Ultra Spa Steps User guide

Confer – Ultra Spa Steps
Assembly and Instruction Manual
Step
3” Support
Sidewall
Confer Plastics Ultra Spa Steps Carton Contents:
2 – Sidewalls
3 – 36” Steps
7 – 36” x 3” Supports

Confer – Ultra Spa Steps
Assembly and Instruction Manual
Step 1: Install the foam pads (4) on the flat
spots located on the bottom edge of the
side wall
Step 2: Using a rubber mallet install one of
the 3” supports into the slot located on the
bottom of the side wall
Step 3: Turn the step assembly over and
finish installing the 3” supports into the
front and back slots of each step location
Step 4: Install the steps (finished edge out)
by placing over the male lugs on the step
sidewall and hitting downward with a
rubber mallet. If the treads don’t fully
engage onto the lugs it may be necessary to
step on the tread directly over the lugs and
force down with your foot.