Contec checkmate ii User manual

Remote Control with
Remote Control with interactive interactive
Program Guide Support
Program Guide Support
II
™
RT-U27A iPG

2-Device Universal Remote
q
qCable
Cable – –all set-top applications including: all set-top applications including:
ØMotorola - DCT Motorola - DCT® ® (RT-U27A (RT-U27A i iPG default) PG default)
Ø
ØScientific-Atlanta - Explorer Scientific-Atlanta - Explorer®
® (RT-U27B
(RT-U27B i iPG default) PG default)
Ø
ØPioneer - Voyager Pioneer - Voyager®
® (RT-U27B
(RT-U27B i iPG default) PG default)
Ø
ØPace - 510 Pace - 510 (
(RT-U27B RT-U27B i iPG PG default) default)
Ø
ØAdvanced-analog Advanced-analog
q
qTV
TV
RT-U27A
RT-U27A i iPG/ B PG/ B i iPG PG - Overview Overview

q
q Point and Press
Point and PressTM
TM Programming - TV only
Programming - TV only
ü
ü
Automated “search-type” method
Automated “search-type” method
ü
üPress and hold [CH ^] until device turns off
Press and hold [CH ^] until device turns off
ü
ü
Eliminates codes Eliminates codes
ü
üGreat for programming unknown brands
Great for programming unknown brands
ü
üProgramming instructions on battery cover
Programming instructions on battery cover
q
q Code-Entry Programming – Cable & TV
Code-Entry Programming – Cable & TV
ü
üEnter multiple 3-digit codes until device turns
Enter multiple 3-digit codes until device turns
off
off
ü
üSimpler, faster “code-entry” method than OEM
Simpler, faster “code-entry” method than OEM
models
models
RT-U27A
RT-U27A i iPG/ B PG/ B i iPG PG can be programmed 2 ways can be programmed 2 ways
Programming
Programming

Only “code entry”
programming will work in
programming your cable
set-top device…
Programming Your
Programming Your
Cable Set-Top Terminal
Cable Set-Top Terminal
1. Turn on cable set-top terminal
1. Turn on cable set-top terminal
2. Press [CBL], then [MUTE]
2. Press [CBL], then [MUTE] together
together until indicator light
until indicator light
lights up (approx. 2-3 seconds)
lights up (approx. 2-3 seconds)
3. Enter 3-digit setup code for cable set-top model
3. Enter 3-digit setup code for cable set-top model
4. Press [CBL] to lock in code. Indicator light will blink
4. Press [CBL] to lock in code. Indicator light will blink
and go out
and go out
5. Press [CBL] to turn on cable set-top terminal. Then
5. Press [CBL] to turn on cable set-top terminal. Then
press some of the other buttons to test other
press some of the other buttons to test other
cable functions
cable functions

1. Turn on TV
1. Turn on TV
2. Press [TV], then [MUTE]
2. Press [TV], then [MUTE] together
together until indicator light
until indicator light
lights up (approx. 2-3 seconds)
lights up (approx. 2-3 seconds)
3. a. Press & hold [CH
3. a. Press & hold [CH ^
^]
]until TV turns off until TV turns off
Or
Or
b. Enter 3-digit setup codes until TV turns off
b. Enter 3-digit setup codes until TV turns off
4. Press [MUTE]…
4. Press [MUTE]…
a. If TV turns on, press [TV] to lock in code. Indicator light will blink and go
a. If TV turns on, press [TV] to lock in code. Indicator light will blink and go
out
out
Or
Or
b. If TV doesn’t turn on, repeat steps 3 and 4 until TV turns
b. If TV doesn’t turn on, repeat steps 3 and 4 until TV turns
on and off. Can also press [CH
on and off. Can also press [CH v
v]
] one
one press at a time
press at a time
until TV turns on and off
until TV turns on and off
Programming Your TV
Programming Your TV

Volume Control Options
Volume Control Options
Volume / mute are controlled on TV
Volume / mute are controlled on TV
q
qTo control volume / mute through your cable set- To control volume / mute through your cable set-
top terminal
top terminal
1. Press [CBL], then [MUTE] 1. Press [CBL], then [MUTE] together
together until indicator light
until indicator light
lights up (approx. 2-3 seconds)
lights up (approx. 2-3 seconds)
2. Press [VOL
2. Press [VOL ^
^], then [CBL] for Cable volume.
], then [CBL] for Cable volume.
Indicator light will blink and go out
Indicator light will blink and go out
** To return volume control back to TV, repeat step 1 above,
** To return volume control back to TV, repeat step 1 above,
then press [VOL
then press [VOL ^
^], then [TV] in step 2 **
], then [TV] in step 2 **

Code # Read-Back
Code # Read-Back
q
qRT-U27A RT-U27A
i
i
PG & B
PG & B
i
i
PG will “read-back” 3 digit
PG will “read-back” 3 digit
setup code stored for each device
setup code stored for each device
q
qTo “read-back” TV setup code… To “read-back” TV setup code…
1. Press [TV], then [MUTE]
1. Press [TV], then [MUTE] together
together until indicator
until indicator
light lights up (approx. 2-3 seconds)
light lights up (approx. 2-3 seconds)
2. Press [LAST] to identify your TV setup code.
2. Press [LAST] to identify your TV setup code.
indicator light will “blink back” code numbers,
indicator light will “blink back” code numbers,
with a 1-second interval between each digit of the
with a 1-second interval between each digit of the
code
code
3. Ex. 10 blinks, then 3 blinks, then 5 blinks = “035”
3. Ex. 10 blinks, then 3 blinks, then 5 blinks = “035”

General Reset
General Reset
q
q Resets remote to factory settings
Resets remote to factory settings
1. Press [CBL], then [MUTE]
1. Press [CBL], then [MUTE] together
together until
until
indicator light lights up (approx. 2-3 seconds)
indicator light lights up (approx. 2-3 seconds)
2. Press [
2. Press [^
^], then [
], then [^
^] again
] again
3. Indicator light will blink and go out
3. Indicator light will blink and go out
4. Restores all codes and features to defaults
4. Restores all codes and features to defaults

q
q Illuminated Keypad Illuminated Keypad
ü
üImproves visibility in low light conditions
Improves visibility in low light conditions
ü
ü7-second time-out illumination saves batteries
7-second time-out illumination saves batteries
q
q Memory Guard
Memory Guard™ ™
ü
ü
Permanent code retention capability
Permanent code retention capability
ü
üEliminates reprogramming after battery
Eliminates reprogramming after battery
changes
changes
qTime Out Time Out
ü
ü
Automatically shuts off remote if same button is
Automatically shuts off remote if same button is
pressed and held for 45 seconds
pressed and held for 45 seconds
ü
üExtends battery life
Extends battery life
Features
Features

Cable Setup Codes
Cable Setup Codes
Scientific-Atlanta
Scientific-Atlanta
Explorer (RT-U27B
Explorer (RT-U27B i iPG default) PG default) 004 004
8600X
8600X 005 005
8600
8600 006 006
8540, 70, 90
8540, 70, 90 007 007
8500
8500 023 023
Motorola / General Instrument
Motorola / General Instrument
DCT, CFT 2200 (RT-U27A
DCT, CFT 2200 (RT-U27A i iPG default) PG default) 001 001
CFT 2100, CFT 2000
CFT 2100, CFT 2000 002 002
Pioneer
Pioneer
Voyager (RT-U27B
Voyager (RT-U27B i iPG default) PG default) 004 004
BA-V1000, BA-V2000
BA-V1000, BA-V2000 010 010
BA-9000
BA-9000 009 009
BC-4600, BA-5000, BA-6000
BC-4600, BA-5000, BA-6000 008 008
Jerrold
Jerrold
DL4, DP(V), DPBB, DQN(V),
DL4, DP(V), DPBB, DQN(V), 003 003
DRZ,
DRZ, 021 021
DRX
DRX 022 022
Pace
Pace
510 (RT-U27B
510 (RT-U27B i iPG default) PG default) 004 004
Philips
Philips
Digital
Digital 017 017
Panasonic
Panasonic
140, 145, 170, 175,
140, 145, 170, 175, 027 027
110, 120, 130, 150, 160
110, 120, 130, 150, 160 028 028

Admiral 058 061 062 067 Inkel 075
Adventura 004 JC Penny 005 010 027 037 041
Akai 065 051 065 069 070
Amark 007 086 JVC 048 077 080
Amstrad 006 Kawasho 041 051
Anam 088 089 093 KMC 007
AOC 065 KTV 007 030 059 065
Belcor 041 Kurazai 062
Bell & Howell 062 Lodgenet 062
Broksonic 011 054 Logik 062
Brokwood 041 Luxman 027 041 051
Candle 027 052 LXI 006 035 067
Centurion 044 051 Magnavox (Philips) 001 005 007 014 027 026
Citizen 027 052 059 062 041 052 068 081 062
Concerto 041 051 Majestic 062
Contec 020 Marantz 003 065 076
Coronado 007 Megatron 086
Crown 007 Memorex 062
Curtis Mathes 044 061 062
Daewoo 027 039 040 041 042 MGA / Mitsubishi 003 027 031 041 044 051
051 090 091 092 094 065 076 084
Daytron 041 044 051 Mongomery Ward 007 037 044 057 058 062
Dumont 041 065 067 081
Electro Home 041 051 NEC 023 027 031 044
Electra 002 Orion 013 017 033 045 047 048
Emerson 007 008 , 011 012 017 Panasonic 018 019 021 024 053 063
054 065 079 Philco 001 007 027 052 065 081
Envision 041 051 Philips (Magnavox) 001 014 027 031 081
Fisher 010 028 Pilot 041 059 097
Funai 004 Pioneer 056
GE 005 019 027 , 031 037 Portland 007 027
041 046 051 053 055 ProScan 055 061 073 082
061 070 Proton 031
Gibralta 007 025 027 031 041 Pulsar 041
044 051 059 060 065 Quasar 019
Goldstar (LG) 007 027 031 041 044 Radio Shack 041
059 060 065 Realistic 012 057 079
Grundig 059 RCA 022 027 046 053 055 061 065
Hall Mark 041 051 072 073 082
Hitachi 007 027 049 051 083 085
TV Setup Codes
TV Setup Codes

Sampo 031 044
Samsung 007 016 020 031 044
Sanyo 002 010 028
Scott 031 044 079
Sears 002 007 010 016 027 028 043 069
Sharp 007 009 023 035 057 064 067 096
Signature 2000 007 044 058 062 067
Sony 032 038 050 066
Soundesign 052
Squareview 006
Super-Macy 071
Sylvania 001 005 006 026 027 031 044 052 081
Symphonic 004 006
Tatung 019
Techwood 027
Teknika 001 007 027 052 062 079
Telerent 007 062
TMK 027 031
Toshiba 016 029 043 069
Totevision 059
Universal 027 070
Vidtech 027
Wards 027 031
White Westinghouse 058
XR-1000 062
Yamaha 027
York 031 044
Zenith 004 015 025 036 042 034
TV Setup Codes - Continued
TV Setup Codes - Continued

Press to display program information.
Press to display program information.
[INFO]
[INFO]
Enter channel numbers.
Enter channel numbers. [0] - [9] [0] - [9]
Mute volume -
Mute volume - [MUTE ] [MUTE ]
Increase or decrease volume -
Increase or decrease volume - [VOL [VOL ^ ^/ v] / v]
Display main menu -
Display main menu - [MENU] [MENU]
Navigates through Program Guide & menu
Navigates through Program Guide & menu
[^, v,<, >]
[^, v,<, >]
[LAST]
[LAST] - Recall last channel. - Recall last channel.
[CH
[CH ^/v ^/v ] ]- Increase or decrease channel. - Increase or decrease channel.
[GUIDE]-
[GUIDE]- Display Program Guide Display Program Guide
[PPV]
[PPV] - Display PPV events - Display PPV events
[EXIT
[EXIT] ] – –Exit Program Guide, menu Exit Program Guide, menu
BUTTON FUNCTIONS – RT-U27A iPG
The RT-U27A iPG is pre-programmed to operate Motorola DCT® & CFT
set-top terminals.
The operation of each button is as follows:
[TV Power]
[TV Power] - TV power on / off - TV power on / off
[CBL Power]
[CBL Power] - - Cable power on / off Cable power on / off
RT-U27A
RT-U27A i iPG PG
Keypad lights up for 7 seconds after last button is
pressed- to turn OFF backlight, press the light bulb