Coolaroo BUTTERFLY User manual

ASSEMBLY GUIDE
GAZEBO
BUTTERFLY
5YR
Warranty
A
G
A
I
N
S
T
U
V
D
E
G
R
A
D
A
T
I
O
N
5
Y
E
A
R
F
A
B
R
I
C
W
A
R
R
A
N
T
Y
Exposure to ultraviolet (UV) radiation from the sun is the
major cause of skin cancer. In some countries the UV radiation
is strong enough to cause sunburn in just 11 minutes on a
ne summers day. To prevent sun damage we recommend
following the Sun Smart steps: slip on clothing, slop on
sunscreen, slap on a hat, slide on sunglasses and seek shade.
Attention: The schematics in this manual are for assembly and operation
illustration only. They may dier from the gazebos actual appearance.
THANK YOU
FOR PURCHASING A
COOLAROO PRODUCT
When not in use for long periods of time dismantle the gazebo,
and store in a dry place. If the canopy is wet, allow to dry naturally
opened up before storing.
If necessary, clean the fabric with a hose.
Components subject to turning and sliding can be treated
with a non-staining lubricant spray (silicon-based).
CARE & MAINTENANCE
To register your product go to coolaroo.com.au. The product code can be found
printed above the barcode on the product packaging, alternatively you can nd
it on the relevant coolaroo.com.au product page.
For help with product assembly
or for any other questions
you may have, contact our
Customer Service Department.
Australia Toll Free: 1800 331 521
New Zealand Toll Free: 0800 555 171
United States Ph: [phone]
Middle East Ph: [phone]
China Ph: [phone]
WARNING
When assembling and using this product, safety precautions should always be followed to reduce the
risk of personal injury and damage to equipment. Please read all instructions before assembly and use.
At least two or more people are recommended for safe assembly.
Keep all children and pets away from assembly area.
Check all nuts and bolts for tightness before and during usage.
Non permanent structure. Do not use in extreme weather conditions including heavy rain or high winds.
Do not leave the gazebo unattended.
Do not place the product near an open ame; or too close to any heat source.
The best under the sun
Coolaroo is the leader in shade fabric technology.
Our extensive range of attractive shade solutions
is carefully manufactured to protect your home,
garden and family from the harsh sun.
coolaroo.com.au
Gale Pacic Limited
145 Woodlands Drive,
Braeside, Victoria, 3195 Australia
Coolaroo is a registered trademark
of Gale Pacic Limited
430559 / 1505
122 Cremorne Street,
Cremorne , Victoria 3121
t 03 9427 1286
f 03 9427 1286
w creativeresults.com.au
© Creative Results
Date 10/06/15 3:30 PM
Job / Version 13295 Coolaroo Cantilever Umbrella Instructions - Butterfly Gazebo A5 2b_FINAL
Flat Size 443mm x 210mm
Finished Size 148mm x 210mm
Product Code 430559
Barcode No.
Barcode Size
Print Process 4CP
Finished Artist
Anthony
Head of Creative
Account Manager
Client
Every effort has been made by
Creative Results to ensure this
artwork is correct. It is, however,
the client’s final responsibility
to check and sign off artwork
proofs or PDFs.
Creative Results will not be
responsible for any errors
approved by the client.
PROCESS
4C

STEP 1
Take all parts out of the box and ensure
they are all present.
a) & b) Upper corner poles x 2
c) Cover poles x 4
d) Lower leg poles x 4
e) Feet x 4
f) Common pole x 8
g) Common bolts x 16
h) Centre pole x 4
i) Leg bolts with plastic caps x 4
j) Lower leg pole bolts with plastic caps x 4
k) Elastic bobbles
l) Feet bolts x 12
m) Spanner 1 (for lower leg pole bolts)
n) Spanner 2 (for upper corner pole bolts)
o) Turnbuckles
p) Canopy
STEP 2
Measure a 4 x 4m square in the position
you want the gazebo, mark the four
corners with chalk or tape. Ensure the
pole feet are placed on these markings
with even spacing between poles to
provide a sound structure.
STEP 4
Connect the common poles (f) into upper
corner poles (a) and (b) as shown.
Using spanner (n) provided secure with
common bolts (g).
STEP 6
Unfold the canopy (p).
STEP 5
Attach the feet (e) into lower leg poles (d)
using bolts (j) and tool (m).
STEP 7
Insert the four cover poles (c) along the
edges of the canopy. Connect corners
of the canopy to the corners of the frame
with the turnbuckles (o).
STEP 8
Secure the edges of canopy to frame with
elastic bobbles (k). Tighten the turnbuckles
(o) by rotating.
STEP 9
Li the assembled upper section of the
gazebo and insert the lower leg poles (d)
into the upper corner poles (a) and (b).
Secure the connection with bolts and
plastic caps (i).
STEP 10
Once erect, ensure the Buttery gazebo
is rmly secured to a stable surface, you
can use feet bolts (l) if desired.
2.9m/9
'6"
4m/13'1"4m/13'1"
BUTTERFLY
ASSEMBLY GUIDE
i
m
a
d
g
j
n
b
e
h
k
o
c
f
l
p
STEP 3
Connect the common poles (f) using
centre poles (h) as shown.
ff f f
f
f
f
f
h
h
h
h
a
b
f
f
h
f
g
a
n
f
f
b
g
n
d
d
e
j
m
l
p
a
a
bb
o
c
c
p
p
p
k
o
p
p
d
d
d
b
b
a a
d
d
m
i
ff f f
f
f
f
f
h
h
h
h
a
b
f
f
h

STEP 1
Take all parts out of the box and ensure
they are all present.
a) & b) Upper corner poles x 2
c) Cover poles x 4
d) Lower leg poles x 4
e) Feet x 4
f) Common pole x 8
g) Common bolts x 16
h) Centre pole x 4
i) Leg bolts with plastic caps x 4
j) Lower leg pole bolts with plastic caps x 4
k) Elastic bobbles
l) Feet bolts x 12
m) Spanner 1 (for lower leg pole bolts)
n) Spanner 2 (for upper corner pole bolts)
o) Turnbuckles
p) Canopy
STEP 2
Measure a 4 x 4m square in the position
you want the gazebo, mark the four
corners with chalk or tape. Ensure the
pole feet are placed on these markings
with even spacing between poles to
provide a sound structure.
STEP 4
Connect the common poles (f) into upper
corner poles (a) and (b) as shown.
Using spanner (n) provided secure with
common bolts (g).
STEP 6
Unfold the canopy (p).
STEP 5
Attach the feet (e) into lower leg poles (d)
using bolts (j) and tool (m).
STEP 7
Insert the four cover poles (c) along the
edges of the canopy. Connect corners
of the canopy to the corners of the frame
with the turnbuckles (o).
STEP 8
Secure the edges of canopy to frame with
elastic bobbles (k). Tighten the turnbuckles
(o) by rotating.
STEP 9
Li the assembled upper section of the
gazebo and insert the lower leg poles (d)
into the upper corner poles (a) and (b).
Secure the connection with bolts and
plastic caps (i).
STEP 10
Once erect, ensure the Buttery gazebo
is rmly secured to a stable surface, you
can use feet bolts (l) if desired.
2.9m/9
'6"
4m/13'1"4m/13'1"
BUTTERFLY
ASSEMBLY GUIDE
i
m
a
d
g
j
n
b
e
h
k
o
c
f
l
p
STEP 3
Connect the common poles (f) using
centre poles (h) as shown.
ff f f
f
f
f
f
h
h
h
h
a
b
f
f
h
f
g
a
n
f
f
b
g
n
d
d
e
j
m
l
p
a
a
bb
o
c
c
p
p
p
k
o
p
p
d
d
d
b
b
a a
d
d
m
i
ff f f
f
f
f
f
h
h
h
h
a
b
f
f
h

STEP 1
Take all parts out of the box and ensure
they are all present.
a) & b) Upper corner poles x 2
c) Cover poles x 4
d) Lower leg poles x 4
e) Feet x 4
f) Common pole x 8
g) Common bolts x 16
h) Centre pole x 4
i) Leg bolts with plastic caps x 4
j) Lower leg pole bolts with plastic caps x 4
k) Elastic bobbles
l) Feet bolts x 12
m) Spanner 1 (for lower leg pole bolts)
n) Spanner 2 (for upper corner pole bolts)
o) Turnbuckles
p) Canopy
STEP 2
Measure a 4 x 4m square in the position
you want the gazebo, mark the four
corners with chalk or tape. Ensure the
pole feet are placed on these markings
with even spacing between poles to
provide a sound structure.
STEP 4
Connect the common poles (f) into upper
corner poles (a) and (b) as shown.
Using spanner (n) provided secure with
common bolts (g).
STEP 6
Unfold the canopy (p).
STEP 5
Attach the feet (e) into lower leg poles (d)
using bolts (j) and tool (m).
STEP 7
Insert the four cover poles (c) along the
edges of the canopy. Connect corners
of the canopy to the corners of the frame
with the turnbuckles (o).
STEP 8
Secure the edges of canopy to frame with
elastic bobbles (k). Tighten the turnbuckles
(o) by rotating.
STEP 9
Li the assembled upper section of the
gazebo and insert the lower leg poles (d)
into the upper corner poles (a) and (b).
Secure the connection with bolts and
plastic caps (i).
STEP 10
Once erect, ensure the Buttery gazebo
is rmly secured to a stable surface, you
can use feet bolts (l) if desired.
2.9m/9
'6"
4m/13'1"4m/13'1"
BUTTERFLY
ASSEMBLY GUIDE
i
m
a
d
g
j
n
b
e
h
k
o
c
f
l
p
STEP 3
Connect the common poles (f) using
centre poles (h) as shown.
ff f f
f
f
f
f
h
h
h
h
a
b
f
f
h
f
g
a
n
f
f
b
g
n
d
d
e
j
m
l
p
a
a
bb
o
c
c
p
p
p
k
o
p
p
d
d
d
b
b
a a
d
d
m
i
ff f f
f
f
f
f
h
h
h
h
a
b
f
f
h

ASSEMBLY GUIDE
GAZEBO
BUTTERFLY
5YR
Warranty
A
G
A
I
N
S
T
U
V
D
E
G
R
A
D
A
T
I
O
N
5
Y
E
A
R
F
A
B
R
I
C
W
A
R
R
A
N
T
Y
Exposure to ultraviolet (UV) radiation from the sun is the
major cause of skin cancer. In some countries the UV radiation
is strong enough to cause sunburn in just 11 minutes on a
ne summers day. To prevent sun damage we recommend
following the Sun Smart steps: slip on clothing, slop on
sunscreen, slap on a hat, slide on sunglasses and seek shade.
Attention: The schematics in this manual are for assembly and operation
illustration only. They may dier from the gazebos actual appearance.
THANK YOU
FOR PURCHASING A
COOLAROO PRODUCT
When not in use for long periods of time dismantle the gazebo,
and store in a dry place. If the canopy is wet, allow to dry naturally
opened up before storing.
If necessary, clean the fabric with a hose.
Components subject to turning and sliding can be treated
with a non-staining lubricant spray (silicon-based).
CARE & MAINTENANCE
To register your product go to coolaroo.com.au. The product code can be found
printed above the barcode on the product packaging, alternatively you can nd
it on the relevant coolaroo.com.au product page.
For help with product assembly
or for any other questions
you may have, contact our
Customer Service Department.
Australia Toll Free: 1800 331 521
New Zealand Toll Free: 0800 555 171
United States Ph: [phone]
Middle East Ph: [phone]
China Ph: [phone]
WARNING
When assembling and using this product, safety precautions should always be followed to reduce the
risk of personal injury and damage to equipment. Please read all instructions before assembly and use.
At least two or more people are recommended for safe assembly.
Keep all children and pets away from assembly area.
Check all nuts and bolts for tightness before and during usage.
Non permanent structure. Do not use in extreme weather conditions including heavy rain or high winds.
Do not leave the gazebo unattended.
Do not place the product near an open ame; or too close to any heat source.
The best under the sun
Coolaroo is the leader in shade fabric technology.
Our extensive range of attractive shade solutions
is carefully manufactured to protect your home,
garden and family from the harsh sun.
coolaroo.com.au
Gale Pacic Limited
145 Woodlands Drive,
Braeside, Victoria, 3195 Australia
Coolaroo is a registered trademark
of Gale Pacic Limited
430559 / 1505
122 Cremorne Street,
Cremorne , Victoria 3121
t 03 9427 1286
f 03 9427 1286
w creativeresults.com.au
© Creative Results
Date 10/06/15 3:30 PM
Job / Version 13295 Coolaroo Cantilever Umbrella Instructions - Butterfly Gazebo A5 2b_FINAL
Flat Size 443mm x 210mm
Finished Size 148mm x 210mm
Product Code 430559
Barcode No.
Barcode Size
Print Process 4CP
Finished Artist
Anthony
Head of Creative
Account Manager
Client
Every effort has been made by
Creative Results to ensure this
artwork is correct. It is, however,
the client’s final responsibility
to check and sign off artwork
proofs or PDFs.
Creative Results will not be
responsible for any errors
approved by the client.
PROCESS
4C

ASSEMBLY GUIDE
GAZEBO
BUTTERFLY
5YR
Warranty
A
G
A
I
N
S
T
U
V
D
E
G
R
A
D
A
T
I
O
N
5
Y
E
A
R
F
A
B
R
I
C
W
A
R
R
A
N
T
Y
Exposure to ultraviolet (UV) radiation from the sun is the
major cause of skin cancer. In some countries the UV radiation
is strong enough to cause sunburn in just 11 minutes on a
ne summers day. To prevent sun damage we recommend
following the Sun Smart steps: slip on clothing, slop on
sunscreen, slap on a hat, slide on sunglasses and seek shade.
Attention: The schematics in this manual are for assembly and operation
illustration only. They may dier from the gazebos actual appearance.
THANK YOU
FOR PURCHASING A
COOLAROO PRODUCT
When not in use for long periods of time dismantle the gazebo,
and store in a dry place. If the canopy is wet, allow to dry naturally
opened up before storing.
If necessary, clean the fabric with a hose.
Components subject to turning and sliding can be treated
with a non-staining lubricant spray (silicon-based).
CARE & MAINTENANCE
To register your product go to coolaroo.com.au. The product code can be found
printed above the barcode on the product packaging, alternatively you can nd
it on the relevant coolaroo.com.au product page.
For help with product assembly
or for any other questions
you may have, contact our
Customer Service Department.
Australia Toll Free: 1800 331 521
New Zealand Toll Free: 0800 555 171
United States Ph: [phone]
Middle East Ph: [phone]
China Ph: [phone]
WARNING
When assembling and using this product, safety precautions should always be followed to reduce the
risk of personal injury and damage to equipment. Please read all instructions before assembly and use.
At least two or more people are recommended for safe assembly.
Keep all children and pets away from assembly area.
Check all nuts and bolts for tightness before and during usage.
Non permanent structure. Do not use in extreme weather conditions including heavy rain or high winds.
Do not leave the gazebo unattended.
Do not place the product near an open ame; or too close to any heat source.
The best under the sun
Coolaroo is the leader in shade fabric technology.
Our extensive range of attractive shade solutions
is carefully manufactured to protect your home,
garden and family from the harsh sun.
coolaroo.com.au
Gale Pacic Limited
145 Woodlands Drive,
Braeside, Victoria, 3195 Australia
Coolaroo is a registered trademark
of Gale Pacic Limited
430559 / 1505
122 Cremorne Street,
Cremorne , Victoria 3121
t 03 9427 1286
f 03 9427 1286
w creativeresults.com.au
© Creative Results
Date 10/06/15 3:30 PM
Job / Version 13295 Coolaroo Cantilever Umbrella Instructions - Butterfly Gazebo A5 2b_FINAL
Flat Size 443mm x 210mm
Finished Size 148mm x 210mm
Product Code 430559
Barcode No.
Barcode Size
Print Process 4CP
Finished Artist
Anthony
Head of Creative
Account Manager
Client
Every effort has been made by
Creative Results to ensure this
artwork is correct. It is, however,
the client’s final responsibility
to check and sign off artwork
proofs or PDFs.
Creative Results will not be
responsible for any errors
approved by the client.
PROCESS
4C