FAIL-SAFE®
ARCHITECTURAL VANDAL RESISTANT
COOPER LIGHTING
DIMENSIONS DESCRIPTION
The Fail-Safe 12" Harmony
Paladin combines exceptional
aesthetics with remarkable
strength. Cast, extra-heavy
aluminum walls of the
front/back housings offer
rugged durability and afford
efficient heat dissipation. A
premium, five-stage paint
finish further protects the
housings.
A liquid injection-molded
silicone gasket provides a
water- and dust-tight seal
between the fixture’s housing
and front-lens assembly.
Paladin is CUL-listed for wet
locations in all mounting
positions. This handsome
fixture will blend seamlessly
into virtually any unsupervised
environment where broad,
low-glare light distribution is
aesthetically pleasing and
security essential: shopping
centers, roadside malls,
corporate building exteriors or
transportation stations.
INSIDE/OUTSIDE POLYCARBONATE
LENS COATING
• Lens is tempered borosilicate
glass 0.225 inches thick and
floats on a gasket for shock
resistance. The lens
dissipates heat and is
unaffected by UV light,
pollution and cleaning
solutions. Half-inch, convex
pillow prisms spread lamp
image and provide an even
glow. For an even softer glow,
use the optional -SW “Soft
White Lens.”
• Surface and regressed
housings are cast-aluminum
for superior strength and
corrosion resistance. Marine-
grade low-copper-alloy
aluminum material. The
regressed housing is
provided with adjustable
mounting brackets to
accommodate for wall
material thickness.
• Long-life, injection-molded
silicone gasket promotes
water- and dust-tight seal
between housing and front-
lens assembly. 1/8-inch-thick,
closed-cell EDPM gasket
facilitates proper seal
between luminaire and
mounting surface. No
additional caulking is
required.
• Four stainless-steel TORX®
screws with center reject pin.
• Porcelain medium base
socket with nickel-plated
brass screw shell. Fluorescent
socket is polycarbonate.
Incandescent socket is
porcelain medium-base with
nickel-plated brass screw
shell.
• Ballasts are standard HPF
and dual-tap 120V/277V.
HID is minus 20° F starting;
electronic CFL is 0° F starting.
12" HARMONY™
26W-42W
Compact Fluorescent
50W-100W
High Pressure Sodium
Metal Halide
75W-100W
Incandescent
RPS-12 / RVS-12
(Surface Incandescent & Compact Fluorescent)
26W-42W CT
75W-100W IN
RPS-12 / RVS-12
(Surface HID & Compact Fluorescent with
Emergency Battery Pack)
50W-100W HPS/MH
12" dia.
305mm
10"
254mm
12" dia.
305mm
4.7"
120mm
8.7"
222mm
RPR-12 / RVR-12
(Regressed HID & Regressed
Compact Fluorescent with EM)
50W-70W HPS/MH
12" dia.
305mm
4.7"
120mm
8.875"
225mm
3.75"
95mm
ORDERING INFORMATION
SAMPLE NUMBER: RPS-12-100MH-DT-WH-L
Product Family
RPS-12=Round
Paladin
Surface,
12" Round
RPR-121=Round
Paladin
Regressed,
12" Round
RVS-12=Round
Vision
Surface,
12˝ Round
RVR-121=Round
Vision
Regressed,
12" Round
Voltage
Compact
Fluorescent
DT=120/277
347=347V
HID
120V=120V
208V=208V
240V=240V
277V=277V
347V=347V
DT3=Dual Tap
120V/277V
(wired 277)
MT3=Multi Tap
120/208/240/27
(wired 277)
Incandescent
120V=120V
Color
BK=Black
WH=White
Lamp
Wattage/
Type
Compact
Fluorescent
26CT
32CT
42CT
HID2
50MH
70MH
100MH
50HPS
70HPS
100HPS
Incandescent
75IN
100IN
Options
P4=Polycarbonate Opal
Lens
EM5=Emergency
Battery Pack
F16=Fuse
L=With lamp
Q=Quartz restrike (lamp
supplied by others)
QS=quartz socket only
QLL=quartz lamp
SC=(3) side conduit
taps w/plugs (top,
left, right)
SW=Soft White glass
lens
RSM=Rough surface
mounting
Back Box Application
Regressed
Fixture only
CP=Concrete pour
regressed housing
(Non-Combustible
Materials Only)
BB=Standard regressed
housing
(Combustible
Materials Only)
Accessories
(Order Separately)
VRSD=TORX®
screwdriver
VRSB=TORX
screwdriver
bit
NOTES: For additional options, consult your Cooper Lighting Representative. Specifications and dimensions subject to change without notice.
170W maximum all regressed fixtures. Wall mount only. Back box may be shipped in advance- see Regressed Housing Mounting & Ordering Information.
Regressed housing is not necessary with standard incandescent fixtures. 2Ceiling mount HID units-- 70W maximum and to be mounted on non- combustible
material only. 3Available wired voltages other than 277V, add desired voltage before MT or DT; (e. g. 120V/MT) 475W maximum when ceiling mounted. 50W
maximum regressed units. 5Compact fluorescent fixtures only. Surface mount fixtures require deep (HID) housing. Available in semi-recessed. 6For HID specify
single voltage only. TORX®is a registered trademark of Camcar Division of Textron Inc.
REGRESSED SAMPLE NUMBER
RPR-12-50MH-DT-BK-BB
Complete Unit
REGRESSED HOUSING MOUNTING AND ADVANCED ORDERING INFORMATION
EXAMPLE: RBB-12
WITH THE STUDWALL
BRACKETS
RPR-12-LH-50MH-DT-BK-BB RBB-12
+
=
BB=Combustible Material Application
CP=Brick or Concrete Pour
LH=
Less
Regressed
Housing
The following regressed
housings may be ordered
in advance
RBB-12-F=For Combustible (Studwall)
Applications - Fluorescent Fixtures Only
RBB-12=For Combustible (Studwall) Applications
- HID and Incandescent Fixtures Only
RCP-12=For Non-Combustible (Brick, Concrete-
Pour) Applications - HID, Fluorescent, and
Incandescent Fixtures
SURFACE HID & COMPACT
FLUORESCENT WITH
EMERGENCY BATTERY PACK
8.5"dia.
217mm
J-Box
Mounting Plate
.250"dia.
Mounting K.O.
Paladin (RPS/RPR) Vision (RVS/RVR)
1407
