Cooper Lighting LUMARK PR Parker User manual

COOPER LIGHTING - LUMARK®
CANOPY
551
COOPER LIGHTING
DIMENSIONS MOUNTING DIMENSIONS
• One-piece injection-
molded UV stabilized
polycarbonate lens is a
minimum of 0.130" thick.
All light-control prisms
and blondels are on the
inside surface of the lens,
reducing dirt build-up and
making cleaning easier
• Lens is held with four
stainless steel screws.
Fasteners are captive in
the lens and sealed by
means of a neoprene
O-ring
• Die-cast aluminum with
reinforcing ribs on
exposed sidewalls.
Thickened areas occur at
lens junction and at
mounting/fastening holes.
Four 1/2" NPT conduit
entries in sides and one
in back of housing.
Black polyester powder
coat is standard
• One-piece die-cut
closed-cell silicone
mounting gasket
• Copper-wound NPF
ballast standard. Ballast
is available in high power
factor with some lamps.
Consult ordering
information
• Porcelain medium-base
socket with nickel-plated
brass screwshell
• Approximate net weight:
20 lbs. (9 kgs.)
DESCRIPTION
The Lumark Parker combines
strength-gaining architecture
with energy-saving technology.
U.L. listed for wet locations
and CSA certified. Mount on
non-combustible surface.
The durable, versatile Parker is
perfect for use in parking bays,
entrances and stairwells, as
well as rapid transit stations
and loading docks. PR
PARKER
70-175W
High Pressure Sodium
Metal Halide
CLEAR PRISMATIC
POLYCARBONATE
PARKING GARAGE
LUMINAIRE
7 "
[178mm]
3 3/16"
[81mm]
NOTES: 1 Uses S-55 (55 Volt) lamp only. 2Not Available in 70 & 100W Metal Halide. 3Products also available in non-US voltages and 50Hz for international markets.
Consult factory for availability and ordering information. 4Multi-Tap ballast is 120/208/240/277V wired 277V. 5Triple-Tap ballast is 120/277/347V wired 347V.
Add desired voltage to end of catalog number. 6Add as suffix in the order shown. 7Lamp is shipped separate from luminaire. Lamp is Cooper designated
product based on luminaire requirements. Specified lamps must be ordered as a separate line item. 8Order separately. 9Specifications and dimensions subject
to change without notice.
Options 6
Q=Quartz Restrike DC Bayonet Base
(Quartz lamp will not come on at initial cold start)
QM=Quick Mount
LL=Lamp Included 7
TR=Tamper Resistant Screws
F1=Single Fuse (120, 277 or 347V)
F2=Double Fuse (208, 240 or 480V)
Accessories 8
TK=Trunnion Kit
VRSD=Tamper-Resistant Screwdriver
VRSB=Tamper-Resistant Bit
ORDERING INFORMATION
SAMPLE NUMBER: HPPR-70N-240V-XX
Lamp Type
HP=High
Pressure
Sodium
MH=Metal
Halide
Series
PR=Parker
Lamp
Wattage
70=70W
100=100W
150=150W 1
175=175W
Ballast
H=Normal
Power
Factor
N=Normal
Power
Factor
W=HPF CWA 2
Voltage 3
120V
208V
240V
277V
347V
480V
MT=Multi-Tap wired 277V 4
TT=Triple-Tap wired 347V 5
Options &
Accessories
(See Below)
11 5/8" sq.
[295mm]
(4) 9/32" Dia. [7mm]
Mounting Holes
8 7/16" sq.
[214mm]