Cooper Lighting Wraparound Series WBI User manual

SURFACE
419
COOPER LIGHTING
• Equipped with energy
saving ballasts/complies
with federal energy
efficiency standards
• Low profile
• Low brightness
• One piece injection molded
acrylic refractor
• Concealed positive metal
latch/hinge
• Refractor hinges either side
• Die formed housing
• Baked white enamel finish
• Surface or stem mounting,
single or continuous row (3)
• Also available in tandem 8'
lengths
• UL/CUL Listed. Suitable for
damp locations.
WBI SERIES
4' or 8' Surface
2 or 4 Lamp
Wraparound
SURFACE WRAPAROUND
INJECTION MOLDED
REFRACTOR
DIMENSIONS DESCRIPTION
The WBI Wraparound Series
offers a low profile housing and
one-piece injection molded
refractor with a concealed metal
latch/hinge assembly. This
energy efficient luminaire
features an IMA refractor
designed for optimum
brightness control while
maintaining architectural appeal
and aesthetics in a surface
mounted luminaire. The WBI
Series has been designed to
meet any specification
requirement when a surface or
pendant mounted luminaire is
needed. The WBI is ideal for
such applications as commercial
office spaces, schools, hospitals
and merchandising areas.
ORDERING INFORMATION
SAMPLE NUMBER: WBI-232IMA-120V-EB81-U
Tandem
Blank=4' Length
8T=8' Length
WBI=Series
Number of
Lamps
2or 4lamps
(Not Included)
Wattage (Length)
40=40W T12 (48")
32=32W T8 (48")
Lens
IMA=Injection Molded
Acrylic Lens
Width
Blank=Standard
A=Wide Body for 2 Lamps
NOMINAL LENGTH A B C D
4'/8' 2 Lamp 12" (305mm) 3-1/4" (83mm) 11" (279mm) 8-3/16" (208mm)
4'/8' 4 Lamp 16" (406mm) 3-1/4" (83mm) 15" (381mm) 12-13/16" (310mm)
Voltage (1)
120V=120 Volt
277V=277 Volt
347V=347 Volt
UNV=Universal Voltage 120-277(2)
Options
GL=Single Element Fuse
GM=Double Element Fuse
Emergency - for EM installed, see EM options table
NOTES: (1)Products also available in non-US voltages and frequencies for international markets. (2)Not available when specifying emergencies, voltage must be specific.
(3)2 point suspension recommended.
For complete product data, reference the Fluorescent Specification binder. Specifications & dimensions subject to change without notice. Consult your Cooper Lighting
Representative for availability and ordering information.
Ballast Type (1)
LE3=T12 Magnetic Energy Saving
EB8 = T8 Electronic Instant Start.
Total Harmonic Distortion < 10%
EB8 /PLUS= T8 Electronic Instant Start.
High Ballast Factor >1.13. Total
Harmonic Distortion < 20%
ER8 = T8 Electronic Program Rapid Start.
Total Harmonic Distortion < 10%
EB2 =T12 Electronic Rapid Start.
(For complete details on generic or to specify
manufacturer’s ballast see pg. 469)
No. of Ballast
1, 2 or 3
No. of
Ballast
1, 2 or 3
No. of Ballast
1, 2 or 3
No. of Ballast
1 or 2
Options
(See Options
Section)
Packaging
U=Unit Pack
COOPER LIGHTING - METALUX®