Cooper Lighting FAIL-SAFE HMS24CR User manual

Catalog #
Project
Comments
Prepared by
Type
Date
SPECIFICATION FEATURES
04/10/2007 9:17:31 AM
Consult your representative for additional options and finishes.
Specifications and Dimensions subject to change without notice.
ADC041723
MOUNTING DIMENSIONS
DESCRIPTION
The Fail-Safe HMS24CR series combines maximum corrosion resistance and
energy-saving technology for your toughest industrial environment. The
surface-mounted luminaire utilizes a stainless-steel continuously welded
one-piece housing, minimizing the number of components exposed to the
harsh environment. The HMS24CR is ready for the toughest environments.
Ceiling mount, U.L.-listed and C.S.A.-certified for wet location.
Applications
The HMS24CR series is an
excellent choice for all corrosion-
prone industrial environments.
Consideration should be given to
any atmosphere consisting of
acids, alkalis, salts, gases or water.
Critical locations are where con-
densation, vaporization, heating
and cooling may occur. Applica-
tions include high ceilings where
H.I.D. lamp sources are the most
cost-effective manner to illuminate
the area.
A ... Lens
Choice of prismatic polycarbonate
or prismatic tempered glass.
Consult ordering information.
B ... Fasteners
Four stainless-steel fasteners.
Phillips head is standard. Also
available with tamper-resistant
screws.
C ... Housing
Die-formed 20-ga. stainless-steel
body with continuously welded
and ground ends to form a
one-piece seamless housing for
maximum resistance to the
environment. Standard 304
stainless-steel, cold-rolled and
annealed, with a natural brushed
finish.
D ... Lamps
(By Others)
E ... Hinge
Stainless-steel internal hinge
allows for easy maintenance and
reduces the number of parts
exposed to the environment.
F ... Door Frame
Die-formed 20-ga. stainless-steel,
cold-rolled and annealed with
overlapping corners.
G ... Ballast
Copper wound, HPF ballast is
standard.
Labels
U.L.-listed, C.S.A.-certified,
standard wet label.
HMS24CR
250W - 400W
High Pressure Sodium
Metal Halide
165W
QL Induction
STAINLESS-STEEL
SURFACE LUMINAIRE
E N E R G Y D A T A
Input Watts:
(1) 250W High Pressure Sodium: 300W
(1) 250W Metal Halide: 295W
(1) 400W High Pressure Sodium: 465W
(1) 400W Metal Halide: 455W
B
E C IHD A
F
G
13"
[330mm]
20"
[508mm]
24"
[610mm]
9"
[229mm]
(4) 3/8" [10mm]
Dia. Mtg. Holes
(2) 7/8" [22mm]
Dia. KO 2 1/4" [57mm]
Dia. Access Hole
24"
[610mm]
18 7/8"
[480mm]
9 7/16"
[240mm]
24"
[610mm]
18"
[457mm]
TORX®is a registered trademark
of Camcar Division of Textron Inc.
FAIL-SAFE®

Fail-Safe • Customer First Center • 1121 Highway 74 South • Peachtree City, GA 30269 • TEL [phone] • FAX [phone]/2007 9:17:31 AM
Specifications and Dimensions subject to change without notice.
ADC041723
PHOTOMETRICS
ORDERING INFORMATION
HMS24CR
1500
3000
4500
6000
7500
Candlepower Distribution Zonal Lumen Summary
Zone Lumens %Lamp %Luminaire
0-30 5867 25.5 36.5
0-40 9513 41.4 59.2
0-60 14362 62.4 89.4
0-90 16060 69.8 100.0
90-180 0 0.0 0.0
0-180 16060 69.8 100.0
80% 70% 50% 30% 10% 0%
70 50 30 10 50 30 10 50 10 50 10 50 10 0
83 83 83 83 81 81 81 78 78 74 74 71 71 70
78 75 73 70 73 71 69 71 67 68 65 65 63 62
72 68 64 60 66 63 60 64 58 62 57 60 56 55
67 61 56 53 60 56 52 58 51 56 51 55 50 48
62 55 50 46 54 50 46 53 45 51 45 50 44 43
58 50 44 40 49 44 40 48 40 46 39 45 39 38
53 45 40 36 45 39 36 43 35 42 35 41 35 34
49 41 36 32 40 35 32 39 31 38 31 38 31 30
46 37 32 28 37 31 28 36 28 35 27 34 27 26
42 33 28 24 33 28 24 32 24 31 24 31 24 23
39 30 25 22 30 25 22 29 22 29 21 28 21 20
rc=Ceiling reflectance, rw=Wall reflectance, RCR=Room cavity ratio
CU Data Based on 20% Effective Floor Cavity Reflectance.
Test No. 4646
HMS24CR-250M
Lamp=MS250/C/HOR
Lumens=23000
Efficiency=69.8%
rc
rw
RCR
0
1
2
3
4
5
6
7
8
9
10
Coefficient of Utilization
Candlepower
Deg.
0 7326 7326
5 7297 7311
15 7194 7145
25 6837 6703
35 5828 5489
45 3936 3479
55 2009 1702
65 1062 827
75 522 418
85 152 152
90 0 0