Coopers of Stortford 8837 User manual

Convection Heater 8837 Instructions for Use
Please read and retain these instructions for future reference v004:13/06/18
FREE STANDING USE ONLY
This product is only suitable for well insulated spaces or occasional use.
TECHNICAL DETAILS:
Voltage: 220-240V a.c.
Frequency: 50Hz
Wattage: 2000W Max.
WARNINGS / CAUTIONS:
THIS PRODUCT IS ONLY SUITABLE FOR WELL INSULATED SPACES OR OCCASIONAL USE.
Do NOT cover the heater or any ventilation holes as this will cause the automatic cut
off to activate and the heater to overheat.
Do NOT use to dry clothing.
Keep away from children and pets.
Do NOT use in humid or damp areas.
Not suitable for wall mounting.
Assembly
Before using the heater,
Turn the heater on its side.
Attach the 2x feet using 4x short screws provided.
The feet MUST be attached securely on the heater as a free
standing unit.

Convection Heater 8837 Instructions for Use
Please read and retain these instructions for future reference v004:13/06/18
HOW TO USE
FOR FREE STANDING ONLY.
Ensure the switches on the heater are in the
off position before connecting to the mains.
Ensure the heater is on a flat and stable
surface before use.
To set the correct working temperatuare set
the heater switches to the maximum heating
setting and the thermostat to max. When the
desired room temperature is reached, turn
down the thermostat until the lights on the
unit go out. The heater will then continue to
operate at this temperature.
The heat settings are controlled by a
combination of the heater swtiches and the
thermostat (see photo).
•To further lower the temperature, select only on of the heater switches and repeat the
above process.
•The light will remain on until the temperature reaches the thermostat setting.
•The heater is fitted with an automatic cut out feature which will activate to prevent the
heater from overheating. If this feature activates, turn off the heater and unplug. Allow to
cool and remove any items restricting the airflow around the heater before resuming use.
•If the automatic cut out feature activates repeatedly then do not continue using and
contact a qualified electrician.
•The fan can be used to flow warm air when the heating switches are turned on and cold
air when the heating switches are turned off. The thermostat must be turned on for the
fan to work.
SAFETY INSTRUCTIONS:
WHEN USING ELECTRICAL APPLIANCES, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE
FOLLOWED:
READ ALL INSTRUCTIONS BEFORE USE.
TO PROTECT AGAINST ELECTRIC SHOCK, DO NOT IMMERSE CORD, PLUG OR
APPLIANCE IN WATER OR ANY OTHER LIQUID.
UNPLUG FROM OUTLET WHEN NOT IN USE AND BEFORE CLEANING. ALLOW THE ITEM
TO COOL THOROUGHLY BEFORE PUTTING ON OR TAKING OFF PARTS.
DO NOT OPERATE ANY APPLIANCE WITH A DAMAGED CORD OR PLUG OR AFTER THE
APPLIANCE MALFUNCTIONS, OR HAS BEEN DAMAGED IN ANY MANNER. WE
RECOMMEND THAT THE POWER CORD IN NOT KINKED OR STORED IN A TWISTED
MANNER, AND THAT YOU REGULARLY CHECK ITS CONDITION.
THE USE OF ANY ACCESSORY ATTACHMENTS NOT RECOMMENDED BY COOPERS OF
STORTFORD MAY CAUSE INJURIES AND INVALIDATE ANY WARRANTY YOU MAY HAVE.

Convection Heater 8837 Instructions for Use
Please read and retain these instructions for future reference v004:13/06/18
DO NOT USE OUTDOORS.
DO NOT LET CORD HANG OVER THE EDGE OF A TABLE OR COUNTER, OR TOUCH HOT
SURFACES.
DO NOT PLACE ON OR NEAR HEAT SOURCES, AND USE ON A LEVEL, STABLE SURFACE.
DO NOT PLACE UNDER OR NEAR FLAMMABLE MATERIALS SUCH AS CURTAINS,
DRAPERIES, SHELVES, LOOSE WALL PAPER ETC.
DO NOT USE THIS APPLIANCE FOR ANY OTHER USE THAN THE INTENDED USE IT IS
DESIGNED FOR.
ENSURE THERE IS SUFFICIENT DISTANCE BETWEEN THIS APPLIANCE AND OTHER ITEMS
ON THE WORK SURFACE OR WORK STATION, OR SUFFICIENT DISTANCE BETWEEN THE
APPLIANCE AND THE CONFINES OF THE AREA IN WHICH IT IS SITUATED. WE
RECOMMEND A MINIMUM CLEARANCE AROUND ALL FACES OF AT LEAST 10CM.
BEFORE USE, CHECK THOROUGHLY FOR ANY DEFECTS AND DO NOT USE IF DEFECTS
ARE FOUND. TAKE CARE NOT TO DROP THE APPLIANCE AS HEAVY IMPACTS MAY
CAUSE INTERNAL DAMAGE.
WARNING
•KEEP THE APPLIANCE AWAY FROM CHILDREN.
•BEFORE CONNECTING THE APPLIANCE, CHECK IF THE VOLTAGE INDICATED ON THE
BOTTOM OF THE APPLIANCE IS IN ACCORDANCE WITH THE MAINS VOLTAGE IN YOUR
HOME.
•THIS APPLIANCE CAN BE USED BY CHILDREN AGED FROM 8 YEARS AND ABOVE AND
PERSONS WITH REDUCED PHYSICAL, SENSORY OR MENTAL CAPABILITIES OR LACK OF
EXPERIENCE AND KNOWLEDGE IF THEY HAVE BEEN GIVEN SUPERVISION OR
INSTRUCTION CONCERNING USE OF THE APPLIANCE IN A SAFE WAY AND
UNDERSTAND THE HAZARDS INVOLVED. CHILDREN SHALL NOT PLAY WITH THE
APPLIANCE. CLEANING AND USER MAINTENANCE SHALL NOT BE MADE BY CHILDREN
WITHOUT SUPERVISION.
•SOME PARTS OF THIS PRODUCT CAN BECOME VERY HOT AND CAUSE BURNS.
PARTICULAR ATTENTION HAS TO BE GIVEN WHERE CHILDREN AND VULNERABLE
PEOPLE ARE PRESENT.
•CHILDREN OF LESS THAN 3 YEARS SHOULD BE KEPT AWAY UNLESS CONTINUOUSLY
SUPERVISED.
•DO NOT PLACE THIS ITEM IMMEDIATELY BELOW A SOCKET-OUTLET.
PLUG WIRING (UK & IRELAND)
This appliance is fitted with a BS 1363 13-amp plug. If you have to replace the fuse, only those
that are ASTA or BSI approved to BS1362 and with a rated current of 13-amps should be used.
If there is a fuse cover fitted, this cover must be re-fitted after changing the fuse. If the fuse
cover is lost or damaged the plug must not be used. Spare fuse holders and fuses are available
from electrical outlets. If the socket outlets in your home or office are not suitable for this
product’s plug, the plug must be removed and disposed of safely. Attempts to insert the plug
into the wrong socket is likely to cause electric hazard. A replacement plug should be wired
according to the following instructions:

Convection Heater 8837 Instructions for Use
Please read and retain these instructions for future reference v004:13/06/18
The cable
A mains electricity cable contains two or three inner wires. Each has a core of copper and an
outer layer of flexible plastic. This product is earthed; the wires in the cord set are colour
coded in the following way:
BLUE NEUTRAL
BROWN LIVE
GREEN & YELLOW EARTH
CARE AND CLEANING INSTRUCTIONS
Do NOT use abrasive cleaners or sharp utensils to clean this appliance.
Wipe surfaces with a soft dry cloth.
Allow to dry thoroughly before further use.
CLEANING INSTRUCTIONS:
Wipe clean using a soft damp cloth.
Do not use detergents or abrasives.
Allow surface to dry fully before resuming use.
DISPOSAL:
•Dispose of all packaging, paper, cartons and plastic, plastic bags in accordance with
your local recycling regulations.
•At the end of the product’s lifespan please dispose of it at an authorised household
WEEE waste recycling centre.
The diagram shows the key features of a
correctly wired three-pin mains plug.

Convection Heater 8837 Instructions for Use
Please read and retain these instructions for future reference v004:13/06/18
COMMISSION REGULATION (EU) 2015/1188
Information requirements for electric local space heaters -
Heating Technical Details:
Model identifier(s): SMDL01B
Item
Symbol
Value
Unit
Heat output
Nominal heat output
Pnom
1.8-2.0
kW
Minimum heat output (indicative)
Pmin
0.8
kW
Maximum continuous heat output
Pmax,c
2.0
kW
Auxiliary electricity consumption
At nominal heat output
elmax
N/A
kW
At minimum heat output
elmin
N/A
kW
in standby mode
elSB
N/A
kW
Item
Unit
Type of heat input, for electric storage local space heaters only (select one)
manual heat charge control, with integrated thermostat
No
manual heat charge control with room and/or outdoor temperature
feedback
No
electronic heat charge control with room and/or outdoor temperature
feedback
No
fan assisted heat output
No
Type of heat output/room temperature control (select one)
single stage heat output and no room temperature control
No
Two or more manual stages, no room temperature control
No
with mechanic thermostat room temperature control
Yes
with electronic room temperature control
No
electronic room temperature control plus day timer
No
electronic room temperature control plus week timer
No
Other control options (multiple selections possible)
room temperature control, with presence detection
No
room temperature control, with open window detection
No
with distance control option
No
with adaptive start control
No
with working time limitation
No
with black bulb sensor
No
Contact details:
COOPERS OF STORTFORD,
11 BRIDGE STREET, BISHOPS’S STORTFORD,
HERTFORDSHIRE,UK, CM23 2JU