Coopers of Stortford PTC H961 User manual

PTC Ceramic Heater H961 Instructions for Use
Please read and retain these instructions for future reference v001: 21/05/21
ASSEMBLY INSTRUCTIONS / INSTRUCTIONS FOR USE:
Unpack the components carefully. Please check all parts have been removed from the packaging.
IMPORTANT
Read these instructions fully before using the heater. Retain these instructions for future reference.
SAFETY INSTRUCTIONS (to be read before operating the heater)
1. Check whether or not the local power supply mains matches the appliance electric rating printed on
the label before operation.
2. Children should be supervised to ensure that they do not play with the appliance. If the appliance is
damaged, do not use it any more.
3. Ensure the power supply to the socket into which the heater is plugged is in accordance with the rating
label on the heater and that the socket is earthed.
4. When the appliance is not in operation, please remove plug from mains supply.
5. The plug must be removed from the socket-outlet before cleaning or maintaining the appliance
6. Do not remove the plug by pulling the power cord.
7. Avoid the use of an extension lead as this may overheat and cause a risk of fire.
8. Keep the mains lead away from the hot body of the heater.
9. WARNING: In order to avoid overheating, do not cover heater.
10. Do not use this heater in the immediate surroundings of a bath, a shower or a swimming pool. Never
locate the heater where it may fall into bathtub or other water container.
11. The device is intended for household use. Do not use outdoors.
12. Do not cover or obstruct any of the heat outlet grilles or the air intake openings of the heater.
13. Always ensure that the heater is not positioned close to curtains or furniture as this could create a fire
hazard.
14. The heater must not be located immediately below an electrical socket-outlet.
15. Do not insert any object through the heat outlet or air intake grilles of the heater.
Technical Data
220V-240V~50-60Hz, IP20, Class II,
1500W
This product is only suitable for well insulated
spaces or occasional use.

PTC Ceramic Heater H961 Instructions for Use
Please read and retain these instructions for future reference v001: 21/05/21
16. Do not place this heater near flammable materials, surfaces or substances, as there may be a risk of
fire.
17. Particular care should be taken when the heater is situated in areas occupied by children or invalids.
18. Always unplug the heater when moving it.
19. The room which is to be heated should not contain any easy inflammable materials (e.g., petrol,
solvents, spray canisters etc.) or other easy combustible materials (e.g., wood or paper). Keep such
materials away form equipment. Risk of fire!!
20. Do not operate the heater with a damaged cord or plug, or after the heater malfunctions, has been
dropped, or damaged in any manner.
21. If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a
similarly qualified person in order to avoid a hazard.
22. This appliance is not intended for use by persons (including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for their safety.
23. Children should be supervised to ensure that they do not play with the appliance.
OPERATION OF THE HEATER
NOTE: It is normal when the heaters are turned on for the first time or when they are turned on after
having not been used for a long period of time the heaters may emit some smell and fumes. This will
disappear when the heater has been on a short while.
SAFETY FEATURES：
1. A thermal overload protector is built in to prevent overheating.
2. When an overheat temperature is reached, the Heater will be automatically shut off. It can only resume
operation when the user resets the unit.
(See reset instructions below)
To Reset the Heater :
1. Unplug the Heater and wait 5-10 minutes for the unit to cool down.
2. Then, turn on the unit again and operate normally.

PTC Ceramic Heater H961 Instructions for Use
Please read and retain these instructions for future reference v001: 21/05/21
Controls
Item
Symbol
Value
Unit
Item
Unit
Heat output
Type of heat input, for electric storage local space
heaters only (select one)
Nominal heat
output
Pnom
1.5
KW
Manual heat charge control, with
integrated thermostat
N/A
Minimum heat
output
(indicative)
Pmin
0.7
KW
Manual heat charge control, with room
and/or outdoor temperature feedback
N/A
Maximum
continuous
heat output
Pmax,c
1.5
KW
Electronic heat charge control with room
and/or outdoor temperature feedback
N/A
Auxiliary electricity consumption
Fan assisted heat output
N/A
At nominal
heat output
elmax
1.5
KW
Type of heat output/room temperature control
(select one)
At minimum
heat output
elmin
0.7
KW
Single stage heat output and no room
temperature control
[no]
Power control
There are three levels and four positions
on rotary switch. The first level is
ventilation only, the second level is 750W
and the third level is 1500 W.
Temperature control
0-40C adjustable thermostat to control
the room temperature. The
thermostat/temperature control button
can be turned from 0 to 270 degrees.

PTC Ceramic Heater H961 Instructions for Use
Please read and retain these instructions for future reference v001: 21/05/21
In standby
mode
elSB
N/A
W
Two or more manual stages, no room
temperature control
[no]
With mechanic thermostat room
temperature control
[yes]
With electronic thermostat room
temperature control
[no]
Electronic room temperature control plus
day timer
[no]
Electronic room temperature control plus
week timer
[no]
Other control options (multiple selections
possible)
Room temperature control, with
presence detection
[no]
Room temperature control, with open
window detection
[no]
With distance control option
[no]
With adaptive start control
[no]
With working time limitation
[no]
With black bulb sensor
[no]
Contact details
CLEANING THE HEATER
1. Always unplug the heater from the wall socket and allow it to cool down before cleaning.
2. Clean the outside of the heater by wiping with a damp cloth and buff with a dry cloth.
3. Do not use any detergents or abrasives and do not allow any water to enter the heater.
STORING THE HEATER
When the heater is not used for long periods of time it should be protected from dust and stored in a clean
dry place.
PLUG WIRING (UK & IRELAND)
This appliance is fitted with a BS 1363 10-amp plug. If you have to replace the fuse, only those that are
ASTA or BSI approved to BS1362 and with a rated current of 10-amps should be used. If there is a fuse
cover fitted, this cover must be re-fitted after changing the fuse. If the fuse cover is lost or damaged the
plug must not be used. Spare fuse holders and fuses are available from electrical outlets. If the socket
outlets in your home or office are not suitable for this product’s plug, the plug must be removed and
disposed of safely. Attempts to insert the plug into the wrong socket is likely to cause electric hazard. A
replacement plug should be wired according to the following instructions:

PTC Ceramic Heater H961 Instructions for Use
Please read and retain these instructions for future reference v001: 21/05/21
The cable
A mains electricity cable contains two or three inner wires. Each has a core of copper and an outer layer of
flexible plastic. This product is double insulated; the wires in the cord set are colour coded in the following
way:
BLUE NEUTRAL
BROWN LIVE
GREEN & YELLOW EARTH
The diagram below shows the key features of a correctly wired three-
pin mains plug.
DISPOSAL
•Coopers of Stortford use recyclable or recycled packaging where possible.
•Please dispose of all packaging, paper, cartons, packaging in accordance with your local
recycling regulations.
•Plastics, polybags –Contains the following recyclable plastic.
Code & Symbol
(bag)
Type of Plastic
Low Density Polyethylene
Commonly used for
Shopping bags, bread bags, squeezy bottles, stretch/pallet wrap, bubble
wrap, multi-pack can holders
Notes
Usually recyclable supermarket deposit points. Check other plastic films as
any non-polythene film e.g. cling film, crisp packets film lids
•At the end of the product’s lifespan please check with your local council authorised household waste
recycling centre for disposal.
Note:
Double insulated appliances do not need the green & yellow Earth
wire. They may only have the Brown and Blue wires.