Copernicus Premium Teach N' Go User manual

Tub
Chart Loop Hook (2)
Casters (4)
Lower Whiteboard Supports (2)
Short Stretcher (2)
Middle Frame (1)
Lock Bar with holders (2)
Protective Brackets (2)
Open Tub (6)
Whiteboard (1)
Upper WhiteBoard
Support (1)
Channel (10)
Small Tub (2)
Bookledge (1)
Lower “U” Spacer (2)
End Frame (2)
Upright Stretcher B
Shorter (1)
XL Poster Rack (1)
XL Poster Folder (4)
Stubby Tubby (2)
Top shelf Rack (2)
Shelf (1)
with Lock Bars
Assembly Guide
TAG2_2014_A
Check out our other products online at
www.copernicused.com
?This product is meant to be assembled by an adult.
?In its unassembled state, small parts present a hazard.
?To be used under direct supervision of an adult.
For assistance, please contact us:
1-800-267-8494
Email [email protected]
Have your packing slip ready for reference
TAG2
Please Recycle
Premium Teach N’ Go Cart
Don’t forget to check out our tips for your whiteboard at:
www.copernicused.com
WARNING

5 lbs Weight Limit
Upright
Stretcher A - Long
4 Thru Holes
1x
Upright
Stretcher B - Short
5 Thru Holes
1x
Before beginning, you should have:
Additional tools required: Adjustable wrench
Premium Teach N’ Go Cart -Parts
J
4x
In Box 1
Middle Frame
1x
5” Caster
4x
Allen Key
(Not to Scale)
2x
Shelf
1x
Chart Loop Hook
2x
Whiteboard
1x
End Frame
2x
Lower “U” Spacers
2x
Long Stretcher
3 Thru Holes
1x
Lower WhiteBoard Support
1x
Bookledge
1x
Top shelf Rack
2x
A
10x
D
26x
K
4x
F
32x
H
4x
E
32x
Short Stretcher
2 Thru Holes
2x
Contents - Box 1
M6 x 35mm
28x M6 x 19mm
C
with Lock Bars
Channel
10x
Hardware
Actual Size
G
8x
Contents - Box 3
Protective Brackets
2x
1 left, 1 right
Lock Bar for
1x
Small Tubs
XL Poster File
4x
XL Poster
1x
Rack
Upper Whiteboard
Support
2 Thru Holes
1x
TAG2
Small Tub
2x
2x
6x
Contents - Box 2
5 lbs Weight Limit
Open Tub
Stubby Tubby
5 lbs Weight Limit
10 lbs Weight Limit
M6 Lock
Washer
M8 Lock
Washer
M6 x 15mm
4x
L
M
4x
B
20x
M6 x 55mm
Driver for Cordless Drill,
optional for faster assembly
(Not to Scale)
1x

lThis symbol denotes a 2 Person Task. For safety, please ensure that there are two people
working on steps displaying this symbol
lWatch for this symbol throughout the Assembly Instructions. Wherever you see it, pay close
attention. The symbol denotes a step needing extra attention to ensure it is done correctly.
lThe Star symbol highlights an advisory note
Tips for Assembly - Using this Manual
2 Person
Watch for These Helpful Symbols
Before You Begin
As You Assemble the Unit
Layout and identify all of the included parts
l
The hardware has been packed according to steps
l
Read the assembly instructions over once to familiarize yourself with them
l
Please note that in its unassembled state, this product contains parts that can be a hazard
l
to small children; it should be assembled by an adult.
lFollow the steps in sequence
lBefore beginning each step, find the part(s) that you need for that step
lPay attention to the labeling on the parts, they are there to help direct you at certain stages
lThe title of each step states what you will be doing. Review the text and the pictures as you
build the unit.
After Assembly; Before Use
lRemove the plastic film from the Whiteboard before writing on it
“The beautiful thing about learning is that no one can take it away from you.” - B. B. King
To validate your warranty submit the ON-LINE form at www.copernicused.com
Validate Your Warranty On-Line
Don’t forget to check out our tips for your whiteboard at:
www.copernicused.com

1
Attach Stretchers to End Frames
Connect End Frames together
You will need: (Not to Scale)
Short Stretcher x 2 End Frame x 2
x 6 x 6
Actual Size: B D
Note orientation:
!Handles bend
outwards
1
2
x2
Upper Whiteboard Support
2 Thru Holes x1
B
D
D
B
BD
B
D
!
Note: Assemble the short
stretcher with the indentations to
the floor.
Repeat for second end frame.

2
Assemble Middle Frame
You will need: (Not to Scale)
Lower U Spacer x1
B x 6
Actual Size:
Middle Frame with Lock Bar x1 Upright Stretcher B Short x1
5 Thru holes
B
B
B
G
B
G
D
DFront
Back
!Note
The indents must face the FRONT
of unit, away from Locking Bar
!Note
Locking Bars must face
the BACK of unit
D
D
G
x 4
D
x 6

3
Assemble Middle Frame
You will need: (Not to Scale)
Lower U Spacer x1
B x 2
Actual Size:
End Frame Assembly x1Middle Frame with Lock Bar x1
Back
Front
!Note
Locking Bars face BACK of unit
B
D
B
DBack
Front
D x 2

Long Stretcher x1
3 Thru Holes 4 Thru holes
4
You will need: (Not to Scale)
A x 2 x 8
Actual Size: D
Lower “U” Spacers x 1
B x 6
x 4
G
Protective Brackets x 2
1 left, 1 right
Upright Stretcher A Long x1
Assemble Outside Frame and Attach to Cart
B
D
1
2
B
!Note
Install with indent facing BACK of unit
Back
DD
ADA
D
D B
BGG

5
Install Casters
You will need: (Not to Scale)
Caster x 4
Actual Size: K
x 4 J x 4 H x 4
K
J
H
!Use adjustable wrench to
tighten casters
Front
Tighten all Fasteners
!Note
It is recommended that the
casters with brakes be installed
at the back to prevent children
from playing with them

6
Assemble Tub Channels
Repeat at other end with mirror image
You will need: (Not to Scale)
Actual Size:
2
12x
E
12x
C
12x
E
E
E
C
C
F
F
F
1Attach Channels at Centre hole
Channels
4x
Top
!Bottom
F
3C
Back Front

7
Attach Poster File Holder and Channels
You will need: (Not to Scale)
Actual Size: A
4x
Channels
2x XL Poster Rack
1x
A
M
M
4x
E
2x
C
2x 2x
F
1
C
E
F
C
E
F
Top
Top
!Bottom
MA
2
Install center bolts first
A
A
!Make sure to use
Lock Nuts here,
not regular nuts

8
Attach Tub Channels at center holes first
You will need: (Not to Scale)
Actual Size: 6x
E
6x
C
6x
Channels
2x
!Hardware Item F
goes on the outside
Top
!Bottom
E
E
C
C
F
F
F
Back Front

9
Attach Shelf
You will need: (Not to Scale)
Actual Size: 4x
E
4x
C
4x
C
Shelf
1x
F
CCC
E
F
E
FE
F
E
F
Back

Attach Tub Channels
You will need: (Not to Scale)
Actual Size: E
4x
C
4x
Channels
2x
E
EC
CF
F
!Hardware Item F
goes on the outside
F
4x
10
Front

11
Attach Small Tub Lock Bar
You will need: (Not to Scale)
Actual Size:
Lock Bar for Small Tubs
1x
A
D
A
D
A x 2 D x 2

!Use middle holes
12
Attach Lower Whiteboard Support
You will need: (Not to Scale)
Actual Size:
x 2 x 2
A D
Lower WhiteBoard Support
1x
A
D
A
D

13
Attach Whiteboard
You will need: (Not to Scale)
Actual Size:
2
3
1
4
4x
E
4x
L
4x
Whiteboard
1x
E
E
L
L
F
F
Tighten all Fasteners
!
Peel off
protective film
F

14
Attach Bookledge and Chart hooks and Shelf Rack
You will need: (Not to Scale)
Actual Size:
2x
Bookledge
1x
1
1 2
3
Top shelf Rack
2x
Chart Loop Hook

12
Insert Tubs
You will need: (Not to Scale)
Actual Size:
15
You will need: (Not to Scale)
Actual Size:
1 1
1 2
Stubby Tubby
2x
Open Tub
6x Small Tub
2x
5 lbs Weight Limit10 lbs Weight Limit 5 lbs Weight Limit

12
You will need: (Not to Scale)
Actual Size:
16
You will need: (Not to Scale)
Actual Size:
XL Poster File
4x
5 lbs Weight Limit