Cornelius Brewed Iced Tea Supplement

Lipton Brewed Iced Tea
Double Valve Dispenser
Training, Installation, & Service Manual
Safety & Specifications
Installation
Service
Training
Part No. 630460171 May 7, 2002
©2001-2002, IMI Cornelius, Inc. Revision B

Lipton Brewed Iced Tea Training, Installation, & Service Manual
630460171 ii May 7, 2002

Lipton Brewed Iced Tea Training, Installation, & Service Manual
May 7, 2002 iii 630460171
Lipton Iced Tea Brewer
Training, Installation, & Service Manual
The products, technical information, and instructions contained in this manual are subject
to change without notice. These instructions are neither intended to cover all details or
variations of the equipment, nor to provide for every possible contingency in the installa-
tion, operation, or maintenance of this equipment. This manual supposes that the person(s)
working on the equipment are trained and skilled in working with electrical, plumbing,
pneumatic, and mechanical equipment. In addition to the information this manual pro-
vides, Cornelius expects proper installation that includes taking appropriate safety precau-
tions as well as adhering and meeting all local safety and construction requirements.
To inquire about current revisions of this and other documentation, or for assistance please contact:
Trademarks and copyrights:
Aurora, Cornelius, Decade, Hydro Boost, Sitco, Spirit, UF-1, Vanguard, Venture, and Vista are registered
trademarks of IMI Cornelius.
Optifill trademark is pending.
LITB Dispenser US and Foreign Patents pending
This document contains proprietary information and it may not be
reproduced in any way without permission from Cornelius.
Printed in U.S.A.
Copyright © 2001-02, All Rights Reserved, IMI Cornelius Inc.
NGB.
505 Cleveland Street
Blairsville, GA.
30512
U.S.A.
Fresh Brewed Service:
------------ 1-866-LiptonT
------------1-866-547-8668
Email:
[email protected]

Lipton Brewed Iced Tea Training, Installation, & Service Manual
630460171 iv May 7, 2002

Lipton Brewed Iced Tea Training, Installation, & Service Manual
630460171 - v May 7, 2002
TABLE OF CONTENTS
SAFETY- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1
Safety Instructions - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -1
Read and follow all safety instructions - - - - - - - - - - - - - - - - - - - - - - - - - - - - -1
Recognize safety alerts - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -1
Different types of alerts - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -1
Safety Tips - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -2
Authorized Service Personnel - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -2
Hot Water Warning - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -2
CO2 (Carbon Dioxide) Warning - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -3
Shipping And Storage - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -4
Key Things To Know - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -4
Cleaning and Sanitation Practices - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -5
SYSTEM OVERVIEW - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 7
Theory of Operation - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -7
Function Keys - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -7
Language key - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -7
Menu key - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -7
Stop key - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -7
Rinse key - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -8
Run key - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -8
Menus and Modes of Operation - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -8
DATA VIEW mode - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -8
SET TIME mode - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -9
SETTING THE TIME AND DATE - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -9
Setting the RINSE TIME - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -9
ADJUST STRENGTH mode - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -9
SERVICE mode - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -9
Display Errors - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 10
Tea Pump state - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 10
Sweetener valve state - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 10
Hot Brew water valve state - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 10
Rinse Water Valve State - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 10
Cold water valve state - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 10
Tea Bag Sold out state - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 11
Sweetener Sold out state - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 11
Hot water temperature - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 11
Heater relay state - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 11
Motor Volts - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 11

Lipton Brewed Iced Tea Training, Installation, & Service Manual
May 7, 2002 - vi 630460171
Normal Pour - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 11
SET-UP mode - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 11
Tank Status - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 12
System Type - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 12
Set-Up Tea Syrup - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 12
Set-Up Sweetener - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 12
Set-up Cold Water - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 13
Set-Up Hot Brew Water - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 13
Timed Pour - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 13
Control Board Inputs: - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 15
Control Board Outputs: - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 15
Capacities - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 16
Environmental Specifications - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 16
INSTALLATION - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 17
Installation Requirements - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 17
Electrical Requirements - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 17
Environmental Requirements - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 18
Initial Installation Procedure - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 18
Delivery Inspection and Unpacking - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 18
Inspection - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 18
Installation Procedure - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 19
LBIT Installation and set up sequence - - - - - - - - - - - - - - - - - - - - - - - - - - - - 19
Filling the Water Tank - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 20
Set-up Tea Extract - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 21
Set-up Sweetener - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 22
Set-up Cold Water - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 22
Set-up Hot Brew Water - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 22
Set-up the Clock and Rinse Times - - - - - - - - - - - - - - - - - - - - - - - - - - - - 23
Initial Rinse Cycle/Final Adjustments - - - - - - - - - - - - - - - - - - - - - - - - - - 23
Rinse Cycle Procedure (General) - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 24
Diagrams - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 26
Sweetener BIB Installation (General) - - - - - - - - - - - - - - - - - - - - - - - - - - - - 28
Maintenance - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 28
SERVICE - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 31
Scheduled Maintenance - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 31
Daily Cleaning - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 31
Daily System Flush (Hot Water Rinse) Procedure - - - - - - - - - - - - - - - - - - - - 32
Rinse Cycle Program - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 33
Monthly Sanitizing Procedure - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 34
Preventative Maintenance - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 35
Annual Pump Tubing Replacement Procedure - - - - - - - - - - - - - - - - - - - - - - 36

Lipton Brewed Iced Tea Training, Installation, & Service Manual
630460171 - vii May 7, 2002
Replacing Pump Tubing - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 36
Troubleshooting - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 39
Service Advisory - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 46
WARRANTY- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 47

Lipton Brewed Iced Tea Training, Installation, & Service Manual
May 7, 2002 - 1 630460171
SAFETY
SAFETY INSTRUCTIONS
Read and follow all safety instructions
Read and follow all safety instructions in this manual and on the machine (decals,
labels, and laminated cards).
Before operating the machine, read and understand all applicable OSHA (Occupation
Safety and Health Administration) safety regulations available from the safety coordi-
nator or supervisor.
Recognize safety alerts
This is the safety alert symbol used in this manual or on the machine. The
safety alert symbol is used to alert personnel to the potential of personal
injury, or damage to the machine.
Different types of alerts
There are three types of safety alerts:
DANGER:Indicatesan immediate hazardous situation
which if not avoided WILL result in serious injury,
death, or equipment damage.
WARNING:Indicatesa potentiallyhazardoussituation
which, if not avoided, COULD result in serious injury,
death, or equipment damage.
CAUTION: Indicates a potentially hazardous situation
which, if not avoided, MAY result in minoror moderate
injury or equipment damage.

Lipton Brewed Iced Tea Training, Installation, & Service Manual
630460171 - 2 May 7, 2002
SAFETY TIPS
•Carefully read all safety messages in this manual and safety signs on the
machine.
•Keep safety signs in good condition and replace missing or damaged safety signs.
•Learn how to operate the machine and how to use the controls properly.
•Do not let anyone operate the machine without proper training.
•Keep the machine in proper working condition.
•Do not allow unauthorized modifications to the machine.
•The brewer can dispense hot water. During the rinse operation water temperature
can exceed 205°F. Certain flow tubes in the brewer carry hot water. Use Caution.
•The heater tank contains no replaceable parts. The entire heater tank must be
replaced if service is required.
•Be certain that the dispenser nozzle is snugly threaded onto the spigot assembly.
AUTHORIZED SERVICE PERSONNEL
HOT WATER WARNING
CAUTION: Only trained and certified electrical,
plumbing, and refrigeration technicians should
service this unit. ALL WIRING AND PLUMBING MUST
CONFORM TO NATIONAL AND LOCAL CODES.
WARNING: This unit dispenses HOT water (160°F
(71°C) - 205°F (96°C) during the rinse cycle.

Lipton Brewed Iced Tea Training, Installation, & Service Manual
630460171 - 3 May 7, 2002
CO2(CARBON DIOXIDE) WARNING
WARNING: CO2 Displaces Oxygen. Strict Attention
must be observed in the prevention of CO2 gas leaks
in the entire CO2 and system. If a CO2 gas leak is
suspected, particularly in a small area, immediately
ventilate the contaminated area before attempting to
repair the leak. Personnel exposed to high
concentration of CO2 gas will experience tremors
which are followed rapidly by loss of consciousness
and death.
CAUTION: PRECAUTIONS TO BE TAKEN IN
STORAGE: Store and use with adequate ventilation.
Firmly secure cylinders upright to keep from falling or
beingknocked over.Screwvalveprotectioncap firmly
in place by hand. Store only where temperature will
not exceed 52°C (125°F). Store full and empty
cylinders separately. Use a first-in, first-out inventory
system to prevent storing full cylinders for long
periods.

Lipton Brewed Iced Tea Training, Installation, & Service Manual
630460171 - 4 May 7, 2002
Shipping And Storage
KEY THINGS TOKNOW
•Always unplug/disconnect the power to the dispenser before servicing.
•Verify adequate water line pressures and volumes.
•Verify water quality, optimum dispense taste may require water treatment.
•Rinse water is very hot (160°- 205°F (71°- 82°C)).
CAUTION: PRECAUTIONS TO BE TAKEN IN
HANDLING: Protect cylinders from damage. Use a
suitable hand truck to move cylinders; do not drag,
roll, slide, or drop cylinders. Never attempt to lift a
cylinder by its cap; the cap is intended solely to
protect the valve. Never insert an object (e.g. wrench,
screwdriver, pry bar) into cap openings; doing so may
damage the valve and cause a leak. Use an adjustable
strap wrench to remove over-tight or rusted caps.
Open valve slowly. If valve is hard to open,
discontinue use and contact your supplier. Never
apply flame or localized heat directly to any part of the
cylinder. High temperatures may damage the cylinder
and could cause the pressure relief device to fail
prematurely and venting the cylinder contents. Never
strike an arc on a compressed gas cylinder or make a
cylinder part of an electrical circuit. For additional
information on storage and handling, refer to
Compressed Gas Association (CGA) pamphlet P-1,
“Safe Handling of Compressed Gases in Containers,”
available from the CGA.
CAUTION: Before shipping, storing, or relocating the
unit, product extract systems must be sanitized;
completion requires purging all sanitizing solution
from the systems. In addition, all liquids, after
sanitizing, must be purged from the unit. A freezing
ambient environment causes residual sanitizing
solution or water remaining inside the unit to freeze
resulting in damage to the internal components.

Lipton Brewed Iced Tea Training, Installation, & Service Manual
May 7, 2002 - 5 630460171
•Do not activate the heater until the water tank is full.
•Rinse must be performed at least once every 24 hours or the brewer will lock out
and will not dispense product.
•The heater tank contains no replaceable parts. The entire heater tank must be
replaced if service is required.
•Warning Battery Life: Disconnecting the power supply or turning the power
switch off for longer than 48 hours will result in a service call to reprogram the
dispenser. The battery will recharge itself when the power is restored to the
board.
CLEANING AND SANITATION PRACTICES
It is imperative that the daily cleaning procedures, hot water flush, and monthly sanitizing
procedures be followed as outlined in chapter 4.
WARNING: Failure to follow the scheduled cleaning
and sanitizing procedures shown in chapter 4 may
result in the growth of potentially harmful bacteria in
the dispensed tea product.

Lipton Brewed Iced Tea Training, Installation, & Service Manual
630460171 - 6 May 7, 2002

Lipton Brewed Iced Tea Training, Installation, & Service Manual
May 7, 2002 - 7 630460171
SYSTEM OVERVIEW
The Lipton Iced Tea Brewer (LBIT) looks and operates like a leaf tea brewer. The LBIT
instantaneously mixes and dispenses tea extract, hot water, cold water, and liquid sweet-
ener to provide a finished tea product. Unlike leaf tea brewers, the LBIT does not have
high maintenance and operational costs, and it is not as susceptible to the bacterial growth
inherent to leaf tea brewers.
The following descriptions provide basic information of:
•Theory of Operation
•Function Keys
•Menus and Modes of Operation
•Capacities.
THEORY OF OPERATION
The fresh brewed process involves the mixing of concentrated (100:1) tea extract with hot
water in order to brew the tea. A residence time of about 0.50 seconds ensures that the tea
mixture is adequately dispersed and increases clarity.
A metered quantity of cold water is added to the brewed tea mixture to produce finished
tea. The cold water reduces the temperature of the final product to approximately 90°F
(32°C). This temperature is similar to iced tea product dispensed from leaf tea brewers.
FUNCTION KEYS
The LBIT controller is a specific purpose circuit board residing within the brewer. The
controller monitors inputs, controls outputs, and provides service and display functions.
Keys providing the basic operations within the controller are labeled Language (-), Menu
(+), Stop (#), Rinse (<), and Run (>). The base operations of the keys are as follows.
Language key
Pressing this key will toggle the display between English and Spanish.
Menu key
Pressing this key will advance the display to the beginning of the next menu item.
There are five menu functions that may be selected: Data View, Set - Time, Strength,
Service, and Set-up.
Stop key
Pressing this key will put the brewer in stop mode. In this mode all normal functions
occur except that tea will not be dispensed when the spigot handle is pulled.

Lipton Brewed Iced Tea Training, Installation, & Service Manual
630460171 - 8 May 7, 2002
Rinse key
Pressing this key will place the brewer in the rinse cycle mode. In this mode the
brewer will require user intervention to initiate each flush of hot water through the
system. This is done by opening the spigot when prompted to do so on the display.
After the rinse is completed, the brewer automatically returns to run mode.
Run key
Pressing this key will return the brewer to run mode. This is the only mode where a
normal dispense is available.
NOTE: While in run mode, if an alarm occurs (over temp, sold out,
etc.) the brewer will display the current errors being detected. Press-
ing the LANGUAGE key will step through the current errors being de-
tected.
MENUS AND MODES OF OPERATION
Pressing the MENU key will scroll through five basic modes in a round robin fashion. The
menus and their order are: DATA VIEW, SET TIME, STRENGTH, SERVICE, and SET-
UP.
To enter a selected mode, the STOP (#) key may be pressed. Once a particular mode is
entered, the keypad keys are referenced as (-), (+), (#), (<), and (>). Display screen
prompts will tell the operator what to do. In general the keys will have the following func-
tion: Scroll forward or backward press (>) or (<), change a value press (+) or (-), to exit or
enter a mode or sub-mode (#).
DATA VIEW mode
Scroll to the Data View Mode using the menu key. Press the (#) key to enter. Press the
(>) to advance. The Data View sub modes include: Time of Day, Water Temperature,
Gallons of tea poured in the last 30 days, Total Gallons of tea poured over the life of
the brewer, Number of tea sold outs recorded (bags used), Number of sweetener sold
outs recorded (bags used), and the Number of days the brewer has been in operation.
WARNING: This unit dispenses HOT water (160°F. -
205°F. (71°C - 96°C) during the rinse cycle.

Lipton Brewed Iced Tea Training, Installation, & Service Manual
May 7, 2002 - 9 630460171
SET TIME mode
SETTING THE TIME AND DATE
1. Press MENU until ENTER SET TIME? is displayed.
2. Press (#) key to enter SET TIME and press (>) to advance.
3. Press the (#) key to enter SET CLOCK?. Read the flash screens.
Press (>) or (<) key to move the cursor. Press (+) or (-) keys to
change settings. Press (#) key twice to save new settings.
Setting the RINSE TIME
Contact the manager or the “decision maker” of the restaurant. Request a
time of the day when the brewer will be cleaned. Recommend a time when
they open the restaurant in the morning. This time should be when they nor-
mally clean their dispensing equipment, or when there are no customers at
the restaurant, or a slow time of the day.
1. Press the (#) key to enter SET RINSE TIME?. Read the flash
screens. Press (>) or (<) key to move the cursor. Press (+) or (-)
keys to change settings. Press (#) key twice to save new settings.
2. Press (#) twice to save the rinse time.
3. Press the (#) key to exit SET TIME.
ADJUST STRENGTH mode
1. Press MENU until ENTER STRENGTH? is displayed.
2. Press (#) to enter and (>) to advance.
3. Read the flash screens. Press (+) or (-) key to change strength settings.
Press (+) or (-) keys to change settings. The allowed adjustment range in
this screen is +/-5% of the installed strength. Each press of the (+) or (-)
keys will change the tea strength by 1% until the 5% maximum change is
reached.
4. Press (>) to advance and (#) to exit.
SERVICE mode
1. Press MENU until ENTER SERVICE? is displayed.
2. To enter Press and hold the STOP key and then press the RUN key.
3. Press (>) to advance to the following sub-modes.

Lipton Brewed Iced Tea Training, Installation, & Service Manual
630460171 - 10 May 7, 2002
4. Press (#) to enter or exit the sub-modes and follow the display instruc-
tions.
DISPLAY ERRORS
Displays most recent error first Press (>) to advance through all errors.
TEA PUMP STATE
This screen displays the current state of the Tea pump (ON/OFF). Pull the
dispense lever to start the flow of tea. Release the dispense lever to stop the
flow of tea.
SWEETENER VALVE STATE
This screen displays the current state of the Sweetener valve drive (ON/OFF
or DISABLED). Pull the dispense lever to start the flow of sweetener.
Release the dispense lever to stop the flow of sweetener.
NOTE: If the brewer is installed as unsweetened, the valve is overrid-
den and locked out, and the controller skips over this function in Ser-
vice mode.
HOT BREW WATER VALVE STATE
This screen displays the current state of the Hot water valve drive (ON/
OFF). Pull the dispense lever to start the flow of hot water. Release the dis-
pense lever to stop the flow of hot water.
Note: The Hot water valve drive operates both the input and output
Hot water valves at the same time.
RINSE WATER VALVE STATE
This screen displays the current state of the Rinse water valve drive (ON/
OFF). Pull the dispense lever to start the flow of hot water. Release the dis-
pense lever to stop the flow of hot water.
COLD WATER VALVE STATE
This screen displays the current state of the Cold water valve drive (ON/
OFF). Pull the dispense lever to start the flow of cold water. Release the dis-
pense lever to stop the flow of cold water.

Lipton Brewed Iced Tea Training, Installation, & Service Manual
May 7, 2002 - 11 630460171
TEA BAG SOLD OUT STATE
This screen displays the current state of the Tea Extract Bag (Sold Out or
OK).
SWEETENER SOLD OUT STATE
This screen displays the current state of the Sweetener (Sold Out or OK).
This screen is skipped if unit is installed as unsweetened.
HOT WATER TEMPERATURE
This screen displays the current hot water heater tank temperature. Pressing
the (+) or (-) key will toggle the display between degrees Fahrenheit and
degrees Celsius.
HEATER RELAY STATE
This screen displays the current state of the hot water heater safety relay
(ON/OFF). Pressing the LANGUAGE key will toggle the state between ON
and OFF. When leaving this screen the safety relay will toggle to ON, unless
an overriding error is present.
MOTOR VOLTS
This screen displays the DC voltage available to drive the tea pump.
NOTE: 30 to 40 Volts DC range. Usually, approximately 37 Volts will
be displayed.
NORMAL POUR
Pull the dispense lever to dispense finished product.
SET-UP mode
1. Press menu until Enter SET-UP is displayed.
2. Press and hold the STOP key and then press the RINSE key
3. Press (>) to advance to the following sub-modes.

Lipton Brewed Iced Tea Training, Installation, & Service Manual
630460171 - 12 May 7, 2002
4. Press (#) to enter or exit the sub-modes and follow the displayed instructions.
TANK STATUS
The heater tank may be filled with water in this sub-mode. Once water flows
from the spigot nozzle then change the tank status to FULL.
SYSTEM TYPE
The system configuration is displays a double or single spigot.
SET-UPTEA SYRUP
Follow the display instructions to prime the tea extract lines, adjust strength
and dispense a 10 second calibration pour. This is used to calibrate the
amount of tea to be dispensed during a normal pour sequence (approxi-
mately 1 gram per second).
NOTE: Tea extract may accumulate in the mix chamber. Several dis-
penses may be required for tea extract to start flowing from the noz-
zle.
The allowed strength accustomed range is +/- 20%. Each press of the (+) or
(-) keys will change the tea strength by 1% until the 20% maximum change
is reached.
SET-UPSWEETENER
Pressing the (+) or (-) keys will toggle the sweetener valve from OFF (dis-
abled)) and ON. If OFF is selected, the next step is skipped.
Follow the display instruction to prime the sweetener line and to dispense a
10 second calibration pour. This is used to calibrate the amount of sweetener
to be dispensed during a normal pour sequence.
CAUTION: Ensure there is water in the heater before
theheaterrelayisturnedON.Otherwisetheheaterwill
fail and it will have to be replaced.