Corsair GLAIVE RGB User manual

GAMING MOUSE
GLAIVE
GLAIVE

CONGRATULATIONS!
CORSAIR GLAIVE RGB is the ultimate gaming mouse in performance and comfort. The contoured
shape is designed for extended play. A custom high-accuracy 16000 DPI optical gaming sensor
ensures maximum performance. Choose between 3 styles of interchangeable thumb grips for a
tailored fit. Onboard profile storage saves lighting effects, macros and DPI settings for universal
access to your settings on any PC. The all-new Omron switches are rated for 50 million clicks,
providing an ultrafast response and reliability over time. 3-zone dynamic RGB backlighting enables
vivid RGB lighting effects and unique customization. An aluminum scroll wheel with rubber grip
guarantees solid response and accuracy.

All mouse buttons are programmable through
CUE software. These represent the default
settings.
GETTING TO KNOW YOUR MOUSE
> Turn on your computer
> Connect the mouse to a USB port
> Download the Corsair Utility Engine
(CUE) software for the most complete
experience
> Run the installer program
> Follow instructions for installation
SETTING UP YOUR MOUSE

E
GA
C
F
HB
D
A
C
D
H
E
F
BG
I
Button 1
Left Click
Button 5
Forward
Button 2
Right Click
Optical Gaming
Sensor
Button 6
Backward
Button 3
Middle Click
Button 4
DPI Switch
PTFE Glide Pads

KI LJ
K
JL
A
C
D
H
E
F
BG
I
J
USB Connection
Cable
Default Thumb
Grip
Optional Thumb
Grip #1
Optional Thumb
Grip #2

Onboard profile feature provides an ability to execute complex actions and custom lighting without
additional software required. This profile can be customized using CUE with user specific macros or
key remaps as well as custom lighting effects and saved back to onboard storage. The mouse will
retain all settings when connected to a different PC, even without CUE running on it.
ONBOARD PROFILE

Note on environmental protection
After the implementation of the European Directive
2002/96/EU in the national legal system, the following
applies:
— Electrical and electronic devices may not be disposed of
with domestic waste.
— Consumers are obligated by law to return electrical and
electronic devices at the end of their service lives to the
public collecting points set up for this purpose of point of
sale. Details to this are defined by the national law of the
respective country. This symbol on the product, the
instruction manual or the package indicates that a product is
subject to these regulations. By recycling, reusing the
materials or other forms of utilizing old devices, you are
making an important contribution to protecting our
environment.
CAUTION!
The manufacturer is not responsible for any radio or TV
interference caused by unauthorized modifications to
this equipment. Such modifications could void the user
authority to operate the equipment.
FCC STATEMENT
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and receiver.
• Connect the equipment into an outlet on
a circuit different from that to which the receiver
is connected.
• Consult the dealer or an experienced radio/TV
technician for help.
This device must not be co-located or operating in
conjunction with any other antenna or transmitter.
Operation is subject to the following two conditions:
(1)this device may not cause harmful interference, and
(2)this device must accept any interference received,
including interference that may cause undesired operation.