Costway FP10344 User manual

FP10344
If you're having difficulty, our friendly
customer team is always here to help.
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Portable Air Conditioner
Climatiseur Portable
USA office: Fontana AUS office: Truganina GBR office: Ipswich FRA office: Saint Vigor d'Ymonville
USA:[email protected]
AUS:[e-mail]
GBR:[e-mail]
FRA:[e-mail]

EN
Before You Start
Please read all instructions carefully.
Retain instructions for future reference.
Separate and count all parts and hardware.
Read through each step carefully and follow the proper order.
We recommend that, where possible, all items are assembled near to the area in
which they will be placed in use, to avoid moving the product unnecessarily once
assembled.
Always place the product on a flat, steady and stable surface.
Keep all small parts and packaging materials for this product away from babies
and children as they potentially pose a serious choking hazard.
FR
Veuillez lire attentivement toutes les instructions.
Conservez les instructions pour vous y référer ultérieurement.
Vérifiez toutes les pièces et les accessoires.
Lisez attentivement chaque étape et suivez l’ordre correct.
Nous recommandons que, dans la mesure du possible, tous les produits
soient assemblés à proximité de la zone où ils seront utilisés, afin d’éviter tout
déplacement inutile du produit une fois assemblé.
Placez toujours le produit sur une surface plane et stable.
Conservez toutes les petites pièces de ce produit et les matériaux d’emballage
hors de portée des bébés et des enfants, car ils pourraient présenter un risque
d’étouffement.
Avant de Commencer
Notes
Thank you for choosing the luxurious and elegant portable air conditioner.
Please keep the manual for future reference, and read the manual carefully
before use.
* The air conditioner is only suitable for indoor use, and is not suitable for
other applications.
* Follow local grid interconnection rules while installing the air conditioner
and ensure that it is properly grounded. If you have any question on
electrical installation, follow the instructions, and if necessary, ask a
professional electrician to install it.
* Place the machine in a flat and dry place and keep a distance of above
50cm/20” between the machine and the surrounding objects or walls.
* After the air conditioner is installed, ensure that the power plug is intact and
firmly plugged into the power outlet, and place the power cord orderly to
prevent someone from being tripped or pulling out the plug.
* Do not put any object into the air inlet and outlet of the air conditioner.
Keep the air inlet and outlet free from obstructions.
* When drainage pipes are installed, ensure that the drainage pipes are
properly connected, and are not distorted or bended.
* While adjusting the upper and lower wind-guide strips of the air outlet,
pluck it with hands gently to avoid damaging wind-guide strips.
* When moving the machine, make sure that it is in an upright position.
Caution, risk of fire
R32
EN
02 03

Features and Components
1. Features
New look, compact structure, streamlined machine, aristocratic atmosphere.
With cooling,dehumidification and fan function, Continuous Water Drainage
Functions.
LED displays the control panel. The machine is beautiful and elegant.
High-quality remote control is equipped to facilitate operation. It adopts a
user-friendly remote control design.
Outdoor interface is set high to facility assembly and keep the smooth flow of
the heat pipe.
Air filtration capability.
Timing switch function,
Protection function of automatically restarting the compressor after three
minutes, a variety of other protection functions.
* The machine should stay away from gasoline, flammable gas, stoves and
other heat sources.
* Don't disassemble, overhaul and modify the machine arbitrarily, otherwise
it will cause a machine malfunction or even bring harm to persons and
properties. To avoid danger, if a machine failure occurs, ask certified
technician to repair it.
* Do not install and use the air conditioner in the bathroom or other humid
environments.
* Do not pull the plug to turn off the machine.
* Do not place cups or other objects on the body to prevent water or other
liquids from spilling into the air conditioner.
* Do not use insecticide sprays or other flammable substances near the air
conditioner.
* Do not wipe or wash the air conditioner with chemical solvents such as
gasoline and alcohol. When you need to clean the air conditioner, you must
disconnect the power supply, and clean it with a half-wet soft cloth. If the
machine is really dirty, scrub with a mild detergent.
* The appliance can be used by children aged from 8 years and above and
persons with reduced physical, sensory or mental capabilities if they have
been given supervision or instruction concerning use of the appliance in a
safe way and understand the hazards involved. Children shall not play with
the appliance. Cleaning and maintenance shall not be made by children
without supervision.
Components
21
7
3
56
4
Control panel Top cover
Caster
Rear Housing
Air outlet louver
Front Housing
base
04 05

Installation and Adjustment
1. Installation:
Warning: before using the mobile air conditioner, keep it upright for at
least two hours.
The air conditioner can be easily moved in the room. In the moving process,
ensure that the air conditioner is in the upright position and the air
conditioner should be placed on a flat surface. Do not install and use the air
conditioner in the bathroom or other humid environments.
1.1 Install the pipe assembly (as shown in Fig.1): screw the pipe assembly
(exhaust fitting end) into the exhaust port on the rear panel.
1.2 Install the window sealing plate assembly
1) Half open the window, and mount the window sealing plate assembly to
the window (as shown in Fig.2 and Fig.3); the assembly can be placed in
horizontal and vertical direction.
2) Pull various components of the window sealing plate assembly open,
adjust their opening distance to bring both ends of the assembly into contact
with the window frame, and fix various components of the assembly.
EVA Filter
Continuous Drainage Hole
Air Vent
Wrapping Post
CON Filter
Drainage Hole
Exhaust Pipe Assembly
Window SealingPlate Assembly
Fig.1
PUSH Fig.2
Fig.3
Drain Hose
06 07

1.3 Install the body
1) Move the machine with installed
pipe and fittings to the window,
and the distance between the
body and walls or other objects
shall be least 50cm/20” (as shown
in Fig.4).
2) Elongate the exhaust pipe and snap the flat end of the exhaust pipe joints
into the hole of the window sealing plate assembly (as shown in Fig.5 and
Fig.6).
Notes:
1. The flat end of the exhaust pipe joints must be snapped into place.
2. The pipe cannot be distorted nor has substantial turning (more than 45 °).
Keep the ventilation of the exhaust pipe not blocked.
Fig.4
50cm/20”
50cm/20”
Fig.5 Fig.6
Important Notice
The length of the exhaust hose shall be 280mm-1500mm/ 11”-59”, and this
length is based on the specifications of the air conditioner. Do not use
extension tubes or replace it with other different hoses, or this may cause a
malfunction. Exhaust host must be not blocked; otherwise it may cause
overheating.
1: When the machine is powered on for the first time, the buzzer will play
power-on music, and then the machine will get into standby status.
2: Power Key: press the key to turn on and turn off the machine. In the case
of power on, press the key to turn off the machine; in the case of power off,
press the key to turn on the machine.
Control Panel Setting
I. Operating instructions:
LED Control Panel is as follows:
1. Power Key
2. Mode Selection Key
3. Down Key
4. Up Key
5.Fan Speed Selection Key
6. Timer Key
7. Sleep Key
SLEEP SPEED TIME MODE POWER
08 09

3: Mode Selection Key: In the case of power on, press the key to switch
between cooling → fan → dehumidifying mode.
4: Up Key and Down Key: press the two keys to change the setting
temperature or setting time, operate as follows:
While setting temperature, press up key or down key to select the required
temperature (not available in fan or dehumidifying mode).
While setting time, press up key or down key to select the required time.
5: Wind Speed Selection Key:
In cooling and fan mode, press the key to select high,low wind speed
operation. But limited by anti-cold conditions, under certain conditions, it may
not run according to the set wind speed.
In dehumidifying mode, pressing the key is invalid, and the fan will forcibly
choose low wind speed operation.
6: Timer Key:
In the case of power on, press the key to close timer; in the case of power
off, press the key to open timer.
Press the key, when the timer symbol flashes, press up and down key to
select the required timer value.
Timer values can be set in 1-24 hours and the timer value is adjusted up or
down by one hour.
7: Sleep Mode:
In the cooling mode, press the sleep key to turn on the sleep mode,then the
unit will work quietly in energy-saving mode.
Note:
1. Do not turn on the sleep mode in the Dehumidifying or Fan mode!
2. The waterfull lamp will turn on and buzzer will alarm for several second,
the compressor will stop to work when the inner unit chassis water is full.
Instructions of key operation of the high-quality remote control are as
follows:
1. Power: Press the key to turn on or turn off the machine.
2. Timer: press the key to set time.
3. Down: press the key to reduce temperature and timing setting.
4. Mode: press the key to switch between cooling, fan, dehumidifying
mode.
5. Up: press the key to increase temperature and timing setting.
6. Fan: press the key to select high, low wind speed.
7. Sleep Mode: Press the key to turn on the sleep mode.
II. Operating Instructions of the Remote Control
The remote control panel is as follows:
10 11

3.1 Frost Protection Function:
In cooling, dehumidifying or energy-saving mode, if the temperature of the
exhaust pipe is too low, the machine will automatically enter protection
status; if the temperature of the exhaust pipe rises to a certain temperature,
it can automatically revert to normal operation.
3.2 Overflow Protection Function:
When water in the water pan exceeds the warning level, the machine will
automatically sound an alarm, and the "FULL" indicator light will flash. At this
point, you need to move the drainage pipe connected the machine or the
water outlet to sewer or other drainage area for drainage(refer to
Drainage Instructions at the end of this chapter for detail) for details. After
the water is emptied, the machine will automatically return to the original
state.
3.3 Automatic Defrosting (cooling mode has this function):
The machine has automatic defrosting function.
III. A Variety of Protection Functions
1. Manual drainage:
1) When the machine stops after the water is full, turn off the machine power
and unplug the power plug.
Notes: Please move the machine carefully, so as not to spill the water in the
water pan at the bottom of the body.
2) Place the water container below the side water outlet behind the body.
3) Unscrew the water plug, the water will automatically flow into the water
container.
Notes:
1. Keep the water plug properly.
2. During drainage, the body can be tilted slightly backwards.
3. If the water container cannot hold all the water, before the water container
is full, stuff the water outlet with the water plug as soon as possible to
prevent water from flowing to the floor or the carpet.
4) When the water is discharged, stuff the water plug up.
Notes:
1. Restart the machine after the water plug is installed, otherwise
condensate water of the machine will flow to the floor or the carpet.
Drainage Instructions
1Rubber Stopper
2Exhaust water tube
12 13

Cleaning: before cleaning and maintenance, turn off the machine and
unplug the plug.
1. Clean the surface
Clean with surface of machine with a wet soft cloth. Don't use chemicals,
such as benzene, alcohol, gasoline, etc.; otherwise, the surface of the air
conditioner will be damaged or even the whole machine will be damaged.
2. Clean the filter screen
If the filter screen is clogged with dust, and the effectiveness of the air
conditioner is reduced, be sure to clean the filter screen once every two
weeks.
Maintenance
2. Continuous drainage (Optional) (only applicable to dehumidifying mode),
as shown in figure:
1) Unplug the water plug on.
2) Set the drainage pipe into the water outlet.
3) Connect the drainage pipe to the bucket.
2.1: Clean the upper filter screen frame
1) Clasp the wedging block of the EVA filter screen frame with hands.
Force down from the outside to remove the EVA filter screen frame.
Unscrew four screws fixing the EVA filter screen and the rear housing to
remove the EVA filter screen (as shown in the above figure) .
2) Put the EVA filter screen into warm water with neutral detergent (about
40℃/ 104℉) and dry it in the shade after rinsing clean.
Unit Storage:
1: Unscrew the drainage cover, unplug the water plug, and discharge the
water in the water pan into other water containers or directly tilt the body to
discharge the water into other containers.
2: Turn on the machine, adjust it to low-wind ventilation mode, and maintain
this state until the drainage pipe becomes dry, so as to keep the inside of the
body in a dry state and prevent it from mildewing.
3: Turn off the machine, unplug the power plug, and wrap the power cord
around the wrapping post; install the water plug and the drainage cover.
4: Remove the exhaust pipe and keep it properly.
5: Cover the air conditioner with a plastic bag. Put the air conditioner in a dry
place, keep it out of the reach of children, and take dust control measures.
1 Rubber
Stopper
2 water tube
3 Receptor
Filter Frame Filter
14 15

Troubleshooting
6: Remove batteries of the remote control and keep them properly.
Note: ensure that the body is placed in a dry place and keep all machine
components properly.
Do not repair or disassemble the air conditioner by yourself. Unqualified
repair will cause damage to users or their properties.
Problems Reasons Solutions
The air
conditioner
does not
work.
There is no electricity. Turn it on after connecting
it to a socket with electricity.
The overflow indicator
displays "FL".
Discharge the water inside.
The ambient temperature
is too low or too high
Recommend to use the
machine in at the
temperature of
7-35℃(44-95℉)
In cooling mode, the room
temperature is lower than
the set temperature; in
heating mode, the room
temperature is higher than
the set temperature.
Change the set
temperature.
In dehumidification mode,
the ambient temperature
is low.
The machine is placed in
a room with an ambient
temperature of greater
than 17℃(62℉).
The cooling
effect is not
good
There is direct sunlight. Pull the Curtain.
Big Noise The air conditioner is not
placed on a flat surface.
Put the air conditioner
on a flat and hard place
(to reduce noise).
Compressor
does not
work.
Overheat protection starts. Wait for 3 minutes until the
temperature is lowered, and
then restart the machine.
Displays 'E2' Check the pipe temperature
sensor and related circuitry.
The remote
control does
not work.
The distance between the
machine and the remote
control is too far.
The remote control is not
aligned with the direction of
the remote control receiver.
Batteries have run down.
The pipe temperature
sensor is abnormal.
Displays 'E1' Check the room
temperature sensor and
related circuitry.
The room temperature
sensor is abnormal.
Let the remote control get
close to the air conditioner,
and make sure that the
remote control directly
faces to the direction of the
remote control receiver.
Replace batteries.
Doors or windows are open;
there are a lot of people;
or in cooling mode, there
are other sources of heat.
Close doors and windows,
and add new air conditioner.
The filter screen is dirty. Clean or replace the filter
screen.
The air inlet or outlet is
blocked.
Clear obstructions.
16 17

Remarques
Merci d'avoir choisi ce climatiseur portable luxueux et élégant.
Veuillez conserver ce manuel pour vous y référer ultérieurement et le lire
attentivement avant de l'utiliser.
* Le climatiseur est uniquement adapté à une utilisation en intérieur, et ne
convient pas à d'autres applications.
* Suivez les règles d'interconnexion du réseau local lors de l'installation du
climatiseur et assurez-vous qu'il est correctement mis à la terre. Si vous
avez des questions sur l'installation électrique, suivez les instructions, et si
nécessaire, demandez à un électricien professionnel de l'installer.
* Placez la machine dans un endroit plat et sec et gardez une distance
supérieure à 50cm/20" entre la machine et les objets ou murs environnants.
* Après l'installation du climatiseur, assurez-vous que la fiche d'alimentation
est intacte et fermement branchée dans la prise de courant, et placez le
cordon d'alimentation de manière ordonnée pour éviter que quelqu'un ne
trébuche ou ne tire sur la fiche.
* Ne mettez aucun objet dans l'entrée et la sortie d'air du climatiseur.
Maintenez l'entrée et la sortie d'air libres de toute obstruction.
* Lorsque des tuyaux de drainage sont installés, assurez-vous qu'ils sont
correctement raccordés et qu'ils ne sont pas déformés ou pliés.
* Lors du réglage des bandes de guidage du vent supérieures et inférieures
de la sortie d'air, tirez-les doucement avec les mains pour éviter
d'endommager les bandes de guidage du vent.
Attention, risque
d'incendie R32
FR
Note: If problems not listed in the table occur or recommended solutions do
not work, please contact the professional service organization.
All the technical and specific parameters,please refer to product nameplate.
Due to continuous improvement,we reserve the right to change some design
without any notice.
Treatment: Don't put the abandoned machine with other
unsorted waste together. Such waste shall be placed
separately for other special use.
18 19