Costway BB5692 User manual

BABY HIGH CHAIR
BB5692

Please read all instructions carefully and keep it for future reference.
General Warnings:
Danger! Keep all small parts and packaging materials for this product away from babies and
children, otherwise they may pose a choking hazard.
The product must be installed and used under the supervision of an adult.
Read through each step carefully and follow the proper order.
Remove all Packaging, separate and count all parts and hardware before Installation.
Please ensure that all parts are correctly installed, incorrect Installation can lead to a Danger.
We recommend that, where possible, all items are assembled near to the area in which
they will be placed in use, to avoid moving the product unnecessarily once assembled.
Ensure a secure surface during construction, and place the product always on a flat, steady
and stable surface.
02

Dinner
03
Bolts

12
M
4. The dinner plate can be removed, which is
convenient for children and adults to eat at
the same table.
3. The seat and table can be
used separately to become
a study table and chair.
Warning:
1. Failure to follow these instructions may affect the safety of children
2. When a child uses a dining chair, the caregiver may not leave.
3. Do not use any part of the dining chair if it is damaged or missing.
4. Before using the dining chair, please check carefully that all parts
are installed correctly.
5. When the child is eating, a seat belt must be used to prevent the
baby from falling or slipping out of the dining chair and causing
serious injury.
6. Please do not use this product when your baby can't start it alone.
7. Do not disassemble or adjust any part of the dining chair while your
baby is in the dining chair.
8. Do not use this product on roads, poolsides, stairs, etc. where it is
dangerous.
9. Keep the accessories out of reach of children. Plastic bags and
small parts pose a choking hazard to children.
10. The maximum carrying capacity of this dining chair is 33 lbs.
1. The dinner plate can be
adjusted in two steps.
Instructions for use：
2. When not using the guard,take out the
guard, and then put (M) into the seat.
.
04

2. After buckling the table top left and right, tighten it with
4 self-tapping screws(M5*15), and then put the lower seat foot
(Undistinguished number).
3. Place the desktop fixing frame on the bottom of the desktop board,
and then tighten it on the lower seat foot with 4 bolts(M6*25) , then
put 4 support tubes on the connection between the fixing frame
and the desktop, and then use 4 self-tapping screws(M5*15)to tighten
the fixing frame and at the connection point of the table top board,
and then support the desktop.
4.Connect the seat and the desktop board according to the corresponding
number, press the middle part of the seat to click into the desktop,
then install the dinner plate, and the dining chair is installed.
05

Welcome to visit our website and purchase our quality products!


this product and giving us valuable feedbacks.
With your inspiring rating, COSTWAY will be more consistent to offer you
EASY SHOPPING EXPERIENCE, GOOD PRODUCTS and EFFICIENT SERVICE!
US office: Fontana, California
UK office: Ipswich
Reward Points
Exclusive Customer Service

Permanent Shopping Cart
Order History
06