Costway TL30207 User manual

www.costway.com
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Visit us: www.costway.com
Follow Costway
Please give us a chance to make it right and do better！
Contact our friendly customer service department for help first.
Replacements for missing or damaged parts will be shipped ASAP!
USER’S MANUAL
Welding Cart with 4 Drawers
TL30207

www.costway.com
Contact Us!
Do NOT return this item.
Contact our friendly customer service department for help first.
E-mail
US: [e-mail]
UK: [e-mail]
Before You StartBefore You Start
Please read all instructions carefully.
Retain instructions for future reference.
Separate and count all parts and hardware.
Read through each step carefully and follow the proper order.
We recommend that, where possible, all items are assembled near to the
area in which they will be placed in use, to avoid moving the product
unnecessarily once assembled.
Always place the product on a flat, steady and stable surface.
Keep all small parts and packaging materials for this product away from
babies and children as they potentially pose a serious choking hazard.
02

www.costway.com
Note: When attaching hardware, hand tighten only until the unit is
together, then use the appropriate tools to tighten the hardware.
03

www.costway.com
1.Put a wheel (2) on the end of the Axle (9) and secure it with Flat
Washer (11) and Cotter Pin (12). See Figure A. Repeat on the other
side.
2.Using four Bolts, Washer, and Nuts (10), attached a Caster (3) to
the Bottom Shelf (1). See Figure B. Repeat on the other side.
04

www.costway.com
3.Connect the bottom (note the hole locations in the diagram) of the
Left Support (7a) and Left Plate (15a) to the Bottom Shelf (1) using
Bolts, Washers, and Nuts (10). See Figure C. Repeat on other side
with Right Support (7b) and Right Plate (15b not shown).
Figure C: Connection of Bottom Shelf (1) and Left Support (7a)
4.Attach the Middle Shelf (5) to the Left and Right Supports(7a, 7b)
and Plates (15a, 15b) using Bolts, Washers and Nuts (10).
5.Push 4 Drawers (14) between Left Plate (15a) and Right Plate (15b
not shown).
6.Place a Hook (8) over the holes on the outside of the top of a
Support (7a/7b), and place the Bolts (10) through both the Hook (8),
Support (7a/7b), and the Top Shelf (6). Secure with Washer and Nuts
(10). Repeat on the other side.
7.Attach the Back Panel (4) to the Bottom Shelf (1) using Bolts,
Washers, and Nuts (10).
8.Attach the Back Panel (4) to the Middle Shelf (5) and the Top Shelf
(6) using Bolts, Washers, and Nuts (10).
9.Insert the Chains (13) through the holes in the Back Panel (4).
10.Wrench tighten all of the hardware.
05

Welcome to visit our website and purchase our quality products!
Reward Points
Exclusive Customer Service
Personalized Recommendaons
Permanent Shopping Cart
Order History
We would like to extend our hearelt thanks to
all of our customers for taking me to assemble
this product and giving us valuable feedbacks.
www.costway.com
Your suggestions and comments for COSTWAY are really important to us!
We sincerely solicit you to go back to our shop and leave a good rating in just a
simple click. It would be quite encouraging if you could kindly do so like below:
February 24, 2019
Great products so far. Fast delivery, easy setup, and working without any issues.
Great products so far
With your inspiring rating, COSTWAY will be more consistent to offer you
EASY SHOPPING EXPERIENCE, GOOD PRODUCTS and EFFICIENT SERVICE!
US office: Fontana, California
UK office: Ipswich
www.costway.com
06