Costway HW66958 User manual

www.costway.com
FLOOR AREA
2MX2M
THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Visit us: www.costway.com
Follow Costway
Please give us a chance to make it right and do better！
Contact our friendly customer service department for help first.
Replacements for missing or damaged parts will be shipped ASAP!
USER’S MANUAL
4-Piece Wicker Conversation Set
HW66958
ASSEMBLED BY 2 ADULTS

www.costway.com
Contact Us!
Hardware inside
Do NOT return this item.
Contact our friendly customer service department for help first.
E-mail
US: [e-mail]
UK: [e-mail]
Before You Start
Read each step carefully before starting. It is very important to ensure each step followed in
correct order, otherwise assembly difficulties may occur.
Most of board parts are labeled or stamped on the raw edges. Have a check to make sure all
parts are included.
Work in a spacious area, preferably on a carpet close to where the unit will be used.
Keep the handtools close at hand. Do not use power tools to assemble your furniture.
They may scratch or damage the parts.
02

www.costway.com
3
A
B
C
D
I
F
B
E
K
L
Notice:
1. 50% Tighten before fixing all screws, Allen wrench is
recommended instead of an electric drill.
2. Place the item on a flat ground to adjust and make sure
it remains stable.
3. Tighten up all screws with tools gradually.
4. If the screws are not aligned with holes during asembly,
please loosen all the other screws to 50% and continue
the assembly process.
5. If the item is not stable, please loosen all the screws,
adjust it on a flat ground and tighten up all screws again.
6. Note: If one or some screws are fully tightened during
assembly, chances are the others will not be aligned with
holes. In addition, all the holes are designed to be relatively
larger to provide more space for the adjustment of the screws.
A
G
H
I
J

www.costway.com
4
Part & Hardware List
A B C
D E F
G H I
J K L
1 2 3
4 5
Back frame (2 pcs) Bench seat frame (1 pc) Bench back frame (1 pc)
Table leg frame (2 pcs)
Seat cushion (2 pcs) Back cushion (1 pc)
Table top frame (1 pc) Table shelf frame (1 pc) Table glass (1 pc)
Right Frame (3 pcs) Left Frame (3 pcs) Seat frame (2 pcs)
Bolt M6 x 30 mm (14 pcs) Bolt M6 x 40 mm (22 pcs)
M6x1 Washers (42 pcs) Allen key M4 (1 pc)
Bolt M6 x 60 mm (6 pcs)

www.costway.com
5
STEP 1 (2 x Chair assembly)
Connect Back frame (D) & Seat frame (C)
with Bolt (2) & Washer (4)
D
C
2
STEP 2
Connect part from Step 1 & Right frame (A)
with Bolt (1), Bolt (2) & Washers (4)
A
2
2
1
STEP 3
Connect part from Step 2 & Right frame (A)
with Bolt (3) & Washer (4)
3
A
STEP 4
Connect part from Step 3 & Left frame (B)
with Bolt (1) Bolt (2) & Washers (4)
1
2
2
B

www.costway.com
6
3
STEP 5
Connect part from Step 4 & Left frame (B)
with Bolt (3) & Washer (4)
Put on Seat cushion (G) to complete single chair
G
STEP 6
STEP 7 (Bench assembly)
Connect Bench seat frame (E) & Bench back frame (F) with Bolt (2) & Washers (4)
F
E
22

www.costway.com
7
STEP 8
Connect part from Step 7 & Right frame (A) with Bolt (1), Bolt (2) & Washers (4)
A
2
2
1
STEP 9
Connect part from Step 8 & Right frame (A) with Bolt (3) & Washer (4)
3
A

www.costway.com
8
STEP 10
Connect part from Step 9 & Left frame (B) with Bolt (1), Bolt (2) & Washers (4)
B
2
1
2
STEP 11
Connect part from Step 10 & Left frame (B)
with Bolt (3) & Washer (4)
3
B
Put on Bench cushion (H) to complete Bench
STEP 12
H

www.costway.com
9
STEP 13 (Table assembly)
Connect Table leg frame (I) & Table top frame
(J) with Bolt (1) & Washers (4)
J
I
I
1
1
1
1
STEP 14
Connect part from Step 13 & Table shelf
frame (K) with Bolt (1) & Washers (4)
11
K
STEP 15
Put on Table glass (L) to complete the Table
L

10
www.costway.com
Please protect your outdoor furniture with a cover when not in use
since Long-term sunlight exposure will result in the damage on the
surface.
In addition to sunlight damage, wood and metal frame suffers when
exposed to extremes in temperature and humidity.
Proper care and cleaning at home will extend the life of your purchase.
Following these important and helpful tips will enhance your furniture
as it ages.
Care and Maintenance
Use a soft, clean cloth that will not scratch the surface when dusting.
Use of furniture polish is not necessary.
Should you choose to use polish, test first in an inconspicuous area.
Using solvents of any kind on your furniture may damage the finish.
Liquid spills should be removed immediately. Using a soft clean
cloth, blot the spill gently. Avoid rubbing.
Check bolts/screws periodically and tighten them if necessary.
Further advice about wood furniture care