Costway NP10152 User manual

THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Follow Costway
Please give us a chance to make it right and do better！
Contact our friendly customer service department for help first.
Replacements for missing or damaged parts will be shipped ASAP!
USER’S MANUAL
Double Tent Cot Camping Bed
NP10152
K-S-000XXX

Contact Us!
Do NOT return this item.
Contact our friendly customer service department for help first.
E-mail
US: [e-mail]
UK: [e-mail]
Before You StartBefore You Start
Please read all instructions carefully.
Retain instructions for future reference.
Separate and count all parts and hardware.
Read through each step carefully and follow the proper order.
We recommend that, where possible, all items are assembled near to the
area in which they will be placed in use, to avoid moving the product
unnecessarily once assembled.
Always place the product on a flat, steady and stable surface.
Keep all small parts and packaging materials for this product away from
babies and children as they potentially pose a serious choking hazard.
02

03
Tent
Fastening nail
3
1
1
1
1
8
FRP pole
QUANTITY
Air bed
Rain cover
Camping bed
350 lbs.

Align a bar and insert it into the bed
sleeve.
04

10. Insert short FRP pole to the tent.
11.
The end of long FRP poles is
inserted to the hole.
13. Tie the rope.
14. Add the rain cover to the tent.
12 Clip the plastic onto the pole.
9. Insert long FRP poles to the tent.
15.
Put the circle around the pole.
8.
Open the FRP poles.
05

18. You can hang a lamp in the tent.
19.
You can put your shoes in the
holding bag under the bed.
21. Put inflated air bed on the
camping bed.
20. Unscrew the gas nozzle counterclockwise,
the inflation will be completed automatically
within 5-8 minutes,and then tighten the gas
nozzle clockwise.
17. Close the buckle under the bed.
16.
Put the tent on the bed and tie the
rope in the corner around the bar.
06
22.
23.
Use the rope and fastening nail to
stabilize the tent.
When you only use the tent,pls insert
the pole into the soil and fasten
with nail.If you need sunshade,pls
use nail and rope to fasten it.

2.Flat air bed.
1.Unscrew the gas nozzle counterclockwise.
07
3. Press and roll it up to deflate.
4.Put it in a storage bag.
When you need to fold the air bed for storage,pls do as following steps.