Courtyard Creations KUS5150 User manual

ASSEMBLY INSTRUCTIONS
KUS5150
ATTENTION: THIS PRODUCT IS NOT FOR COMMERCIAL USE
INTENDED FOR RESIDENTIAL USE ONLY.
Attention:
Make sure that each bolt needed for all steps matches the
corresponding figure to ensure proper assembly.
Step 1:
Place the back assembly (#1) onto a non-abrasive surface, such as
a carpet. Insert the back assembly (#1) into the seat assembly (#2).
See Figure 1.
FIGURE 1
KUS5150-CS04-6
KUS5150-CS02-1
KUS5150-CS01-2
KUS5150-CS01-3
17C33A07A5001Y4
17C33A0706001Y4
17C02A0755131Y4
17C01A0706001Y4
17FA05040301-Y4
18000337004
18000337006
18000337001
17KAA0101----Y4
17KAA0201----Y4
61K5150C00001BA
BACK ASSEMBLY
LEFT LEG
RIGHT LEG
BOLT M6*64
BOLT M6*16
BOLT M6*14
BOLT M6*16
WASHER d6.5*D13*1.0
BOLT CAP
BOLT CAP M6
BOLT CAP M6
HEX.KEY WRENCH 4MM
SEAT CUSHION
PARTS LIST
PART
NO. MATERIAL CODE PART Q’TY
1 1
1
1
1
2
2
2
2
3
4
5
6
7
8
9
10
11
12
13
14
15
2
2
2
1
1
1
6
4
SEAT ASSEMBLY
HEX.KEY WRENCH 6MM
PAGE 1 OF 2 COURTYARD CREATIONS INC.
STOP DON’T RETURN TO STORE!
!
!
!
!
!
SERVICE CENTER TOLL FREE NO.
TEL: [phone]
FAX: [phone]
Use the correct bolts as indicated. Do not tighten any of the bolts until the chair is completely assembled.
Do not discard of any of the packaging until you have checked that you have all of the parts and fittings required.
Keep children away during assembly. This item contains small parts that can be swallowed by children.
Children should always be under direct adult supervision while using this product.
Retain these assembly instructions for future reference.
Quote the following FQC NO. when contacting the service center.
2
1
1
2

#8 BOLT M6*16
16
Step 2:
At the rear of the seat, fasten the back assembly (#1) to the seat
assembly (#2) by using bolts (#5) and washers (#9). Keep the bolts
loose. See Figure 2.
Step 3:
At the front of the seat assembly (#2), fasten the legs (#3 and #4)
to the seat assembly (#2) by using bolts (#6) and washers (#9).
Keep the bolts loose. See Figure 3.
Step 4:
At the front of the seat assembly (#2), fasten the legs (#3 and #4) to
the seat assembly (#2) by using bolts (#7). Keep the bolts loose.
See Figure 4.
Step 5:
Fasten the left leg (#3) and the right leg (#4) to the back assembly
(#1) by using bolts (#8) and washers (#9). Make sure that all of the
bolts have been tightened completely and cover them with bolt caps
(#10, #11 and #12). See Figure 5.
Step 6:
Place the seat cushion (#15) onto the chair. Secure the cushions to
the chair by using the plastic clamps. See Figure 6.
Cleaning and Maintenance
•Wash frame parts with mild soap and water, rinse thoroughly,
and dry completely. Do not use bleach, acid, or other solvents on
the frame parts.
•Cushions may be washed on the surface only by using mild
soap and water or a commercial foaming upholstery cleaner if
necessary. If washed, rinse well and hang to dry. Do not machine
wash or dry.
•We recommend the use of furniture covers when not in use.
•Inspect and tighten all bolts and fasteners on a regular basis to
ensure proper performance and safety of your chair.
•In order to prolong the life and beauty of your chair, we
recommend that it be stored in a dry and protected area during
off season periods.
FIGURE 2
FIGURE 4
FIGURE 6
#5 BOLT M6*64
#6 BOLT M6*16
#7 BOLT M6*14
14
16
64
FIGURE 3
FIGURE 5
STOP DON’T RETURN TO STORE!
PAGE 2 OF 2
2
1
3
4
10
6
92
7
11
2
3
4
3
4
9812
1
15
Note: The labels marked “L” and “R” on the legs (#3 and #4) should
coincide with Figure 3 to ensure proper assembly.
R
L
5
9
10
The store where you made your purchase
does not stock parts for this item.
If you need parts,
whether they are missing or damaged,
STOP!
Missing A Part?
No Need To Go Back To
The Store
Call us between 9:00 AM and 4:30 PM
Eastern Time Monday through Friday
For further assistance,
please visit us at
[email protected]
Call Toll Free:
TEL: [phone]
FAX: [phone]
READ THESE INSTRUCTIONS COMPLETELY BEFORE STARTING ASSEMBLY
SEPARATE AND IDENTIFY ALL PARTS, MAKING SURE THAT YOU
HAVE ALL OF THEPARTSLISTED.
IF YOU DO NOTLOCATE ALL OF THE PARTS LISTED, INSPECT THE
PACKING MATERIAL FOR SMALL PARTSTHAT MAYHAVEBECOME
SEPARATED DURING SHIPMENT.
IF YOU EXPERIENCEANY DIFFICULTY DURING ASSEMBLYOR IF ANY
PARTS ARE MISSING OR DAMAGED,CALL THE HELP LINE AT
1-877-539-7436 BEFORERETURNING THIS ITEM TO THE STORE.
PROVIDE THEFOLLOWING INFORMATION WHEN CALLING:
1-MODEL NUMBER OF THEPRODUCT.
2-PARTNUMBER AND MATERIAL CODE OF THE PARTFROM THE PARTS
LIST.
MOST PROBLEMS CAN BERESOLVED WITHOUT RETURNING THIS
PRODUCT TO THERETAILER.
Warranty
•This product is covered by Courtyard Creations Inc.
One–year limited warranty.
•Proof of purchase (dated register receipt) is required
for warranty claims.
•It remains the customer’s responsibility for freight and
packing charges to and from over service center.