Courtyard Creations KLS780W-WM User manual

ASSEMBLY INSTRUCTIONS
ATTENTION: THIS PRODUCT IS NOT FOR COMMERCIAL USE
INTENDED FOR RESIDENTIAL USE ONLY.
PARTS LIST KLS780W-WM
PART
NO. MATERIAL CODE PART Q’TY PART
NO. MATERIAL CODE PART Q’TY
1
2
3
4
5
6
7
8
9
10
11
12
13
14
2
10
4
6
1
1
1
1
1
1
1
2
2
4
PAGE 1 OF 3 COURTYARD CREATIONS INC.
STOP DON’T RETURN TO STORE!
Attention:
Make sure that each bolt needed for all steps matches the
corresponding figure to ensure proper assembly.
Step 1:
Place the seats (#1 and #2) onto a non-abrasive surface,
such as a carpet, with its underside facing upwards. Fasten
the cross brace (#3) to the right seat (#1) and the left seat
(#2) by using bolts (#6) and washers (#9). Keep the bolts
loose. See Figure 1.
KLS780W-CS03
18000337002
17C01A0725101Y4
17C01A0807131Y4
17C01A0706002Y4
BOLT CAP M6
HEX.KEY WRENCH 6MM
17KAA0201----Y4
17KAC3301----Y3 NUT WRENCH 13MM
PLASTIC NUT M6*P1.0
WASHER d6.5*D13*1.0
PLASTIC WASHER
MIDDLE SEAT
MIDDLE BACK
CROSS BRACE
LEFT SEAT
RIGHT SEAT
62KLS780WB201
BOLT M6*16
BOLT M6*75
BOLT M8*18
KLS780W-CS01
KLS780W-CS02
KLS780W-CS04
17FA05040301-Y4
1814010505
FIGURE 1
13
2
612
9
16
#6 BOLT M6*16
Do not discard of any of the packaging until you have checked that you have all of the parts and fittings
required.
Keep children away during assembly. This item contains small parts that can be swallowed by children.
Children should always be under direct adult supervision while using this product.
Retain these assembly instructions for future reference.
Quote the following FQC NO. when contacting the service center.
!
!
!
!
SERVICE CENTER TOLL FREE NO.
TEL: [phone]
FAX: [phone]
RL
Note:
1. The labels marked “L” and “R” on the seats (#1 and #2)
should coincide with Figure 1 to ensure proper assembly.
2. The arrow marks on the cross brace (#3) should coincide
with Figure 1 to ensure proper assembly.
18000C23001

PAGE 2 OF 3
STOP DON’T RETURN TO STORE!
FIGURE 2 FIGURE 3
FIGURE 4 FIGURE 5
FIGURE 6 FIGURE 7
12
4
78
812
12
9
9
10
9
11
4
9
11
44
brace
1
25
Step 2:
Fasten the brace on the middle seat (#4) to the slots on
the right and left seats (#1 and #2) by using bolts (#7).
Keep the bolts loose. See Figure 2.
Step 4:
Pull the middle seat (#4) forward. See Figure 4.
Step 6:
Make sure that the brace on the middle seat (#4) is placed
into front most position. See Figure 6.
Step 7:
Pull the middle seat (#4) forward. See Figure 7.
Step 5:
Lift the middle seat (#4). Then, pull the brace of the middle seat
(#4) forward. See Figure 5.
Step 3:
Fasten the middle back (#5) to the right and left seats (#1 and
#2) by using bolts (#8), washers (#9), plastic washers (#10),
and plastic nuts (#11). Make sure that all of the bolts have
been tightened completely and cover them with bolt caps (#12 ).
See Figure 3.
75
#8 BOLT M6*75
44
18
#7 BOLT M8*18

Cleaning and Maintenance
• Wash frame parts with mild soap and water, rinse thoroughly, and dry completely. Do not use bleach, acid, or
other solvents on the frame parts.
• We recommend the use of furniture covers when not in use.
• Inspect and tighten all bolts and fasteners on a regular basis to ensure the proper performance and safety of
your bench.
• In order to prolong the life and beauty of your bench, we recommend that it be stored in a dry and protected
area during off season periods.
PAGE 3 OF 3
STOP DON’T RETURN TO STORE!
Step 8:
Push the middle seat (#4) backward and press the safety hook to lock tightly. See Figure 8.
Step 9:
When converting to a 3-seaterbench, open the safety lock and pull the middle seat (#4) forward. Then, push the brace
underneath the middle seat (#4) back into place. See Figure 9.
FIGURE 8
FIGURE 9
4
The store where you made your purchase
does not stock parts for this item.
If you need parts,
whether they are missing or damaged,
STOP!
MissingAPart?
No Need To Go Back To
The Store
Call us between 9:00 AM and 4:30 PM
Eastern Time Monday through Friday
Call Toll Free:
TEL: [phone]
FAX: [phone]
READ THESE INSTRUCTIONS COMPLETELY BEFORE STARTING ASSEMBLY
SEPARATE AND IDENTIFY ALL PARTS, MAKING SURE THAT YOU
HAVE ALL OF THEPARTSLISTED.
IF YOU DO NOTLOCATE ALL OF THE PARTS LISTED, INSPECT THE
PACKING MATERIAL FOR SMALL PARTSTHAT MAYHAVEBECOME
SEPARATED DURING SHIPMENT.
IF YOU EXPERIENCEANYDIFFICULTYDURING ASSEMBLYOR IF ANY
PARTS ARE MISSING OR DAMAGED,CALL THE HELP LINE AT 1-877-539-7436
BEFORERETURNING THIS ITEM TO THESTORE.
PROVIDE THEFOLLOWING INFORMATION WHEN CALLING:
1-MODEL NUMBER OF THEPRODUCT.
2-PARTNUMBER AND MATERIAL CODE OF THE PARTFROM THE PARTS LIST
MOST PROBLEMS CAN BERESOLVED WITHOUT RETURNING THIS PRODUCT
TO THERETAILER.