Courtyard Creations KUS897C-WM User manual

ASSEMBLY INSTRUCTIONS
KUS897C-WM
ATTENTION: THIS PRODUCT IS NOT FOR COMMERCIAL USE
INTENDED FOR RESIDENTIAL USE ONLY.
Attention:
Make sure that each bolt needed for all steps matches the
corresponding figure to ensure proper assembly.
Step 1:
Place the seat assembly (#1) onto a non-abrasive surface, such as
a carpet. Fasten the back assembly (#2) to the seat assemby (#1)
by using bolts (#6), washers (#11), and plastic nuts (#12). Keep the
bolts loose. See Figure 1.
FIGURE 1
KUS897C-CS02-1
KUS897C-CS03-1
KUS897C-CS01-2
KUS897C-CS01-3
62KUS897CH101
17C01A0712002Y4
17C01A0714003Y4
17C02A0755131Y4
17FA05040301-Y4
18000337002
18000C23001
18000337006
18000337004
17KAA0101----Y4
17KAA0201----Y4
17KAB1101----Y4
LEFT LEG
RIGHT LEG
SUPPORT
BOLT M6*40
BOLT M6*35
BOLT M6*16
BOLT M6*14
BOLT M6*34
WASHER d6.5*D13*1.0
PLASTIC NUT M6*P1.0
BOLT CAP M6
BOLT CAP M6
BOLT CAP
HEX.KEY WRENCH 4MM
BACK CUSHION
SEAT CUSHION
PARTS LIST
Q’TY Q’TY
11
1
1
1
1
2
4
2
3
4
5
6
7
8
11
12
13
14
15
16
17
182
2
1
1
11
17C33A0706001Y4 61K897CX00001BA
919211
17C21A0714131Y4 61K897CY00001BA
10 20211
12
2
2
8
SEAT ASSEMBLY
BACK ASSEMBLY
HEX.KEY WRENCH 6MM
NUT WRENCH 10&13MM
PAGE 1 OF 3 COURTYARD CREATIONS INC.
611
11 12
13 2
1
40
40
40
40
40
40
#6 BOLT M6*40
MATERIAL CODE
PART
NO. PART PART NO. MATERIAL CODE PART
"
"
"
"
"
SERVICE CENTER TOLL FREE NO.
TEL: [phone]
FAX: [phone]
Use the correct bolts as indicated. Do not tighten any of the bolts until is completely assembled.
Do not discard of any of the packaging until you have checked that you have all of the parts and fittings required.
Keep children away during assembly. This item contains small parts that can be swallowed by children.
Children should always be under direct adult supervision while using this product.
Retain these assembly instructions for future reference.
Quote the following FQC NO. when contacting the service center.
STOP DON’T RETURN TO STORE!

#8 BOLT M6*14
14
Step 3:
Fasten the support (#5) to the legs (#3 and #4) by using bolts (#8).
Keep the bolts loose. See Figure 3.
Step 4:
Fasten the support (#5) to the legs (#3 and #4) by using bolts (#9)
and washers (#11). Keep the bolts loose. See Figure 4.
Step 5:
Turn the chair to its upright position. Fasten back assembly (#2) to
the legs (#3 and #4) by using bolts (#10) and washers (#11). Make
sure that all of the bolts have been tightened completely and cover
them with bolts caps (#13, #14 and #15). See Figure 5.
Step 6:
Place the cushions (#19 and #20) onto the chair. Secure the cushions
to the chair by using plastic clamps. See Figure 6.
Step 7:
Lift the chair arms with mild force, then pull them backward for other
desired position. See Figure 7.
FIGURE 2
FIGURE 4
FIGURE 7FIGURE 6
#9 BOLT M6*16
16
FIGURE 3
FIGURE 5
PAGE 2 OF 3
3
4
5
8
14
3
4
5
9
11
15 2
4
3
10
11 13
34
#10 BOLT M6*34
19
20
35
#7 BOLT M6*35
3
1
4
L
R
3
1
4
L
R
R
7
11
13
Step 2:
Fasten the seat assembly (#1) to the legs (#3 and #4) by using bolts
(#7) and washers (#11). Keep the bolts loose. See Figure 2.
Note:
The labels marked “L” and “R” on the legs (#3 and #4) should coincide
with Figure 2 to ensure proper assembly.
2
STOP DON’T RETURN TO STORE!

PAGE 3 OF 3
STOP DON’T RETURN TO STORE!
The store where you made your purchase
does not stock parts for this item.
If you need parts,
whether they are missing or damaged,
STOP!
MissingAPart?
No Need To Go Back To
The Store
Call us between 9:00 AM and 4:30 PM
Eastern Time Monday through Friday
Call Toll Free:
TEL: [phone]
FAX: [phone]
READ THESE INSTRUCTIONS COMPLETELY BEFORE STARTING ASSEMBLY
SEPARATE AND IDENTIFY ALL PARTS, MAKING SURE THAT YOU
HAVE ALL OF THE PARTS LISTED.
IF YOU DO NOT LOCATE ALL OF THE PARTS LISTED, INSPECT THE
PACKING MATERIAL FOR SMALL PARTS THAT MAY HAVE BECOME
SEPARATED DURING SHIPMENT.
IF YOU EXPERIENCE ANY DIFFICULTY DURING ASSEMBLY OR IF ANY
PARTS ARE MISSING OR DAMAGED, CALL THE HELP LINE AT
1-877-539-7436 BEFORE RETURNING THIS ITEM TO THE STORE.
PROVIDE THE FOLLOWING INFORMATION WHEN CALLING:
1-MODEL NUMBER OF THE PRODUCT.
2-PART NUMBER AND MATERIAL CODE OF THE PART FROM THE PARTS
LIST.
MOST PROBLEMS CAN BE RESOLVED WITHOUT RETURNING THIS
PRODUCT TO THE RETAILER.
Cleaning and Maintenance
 Wash frame parts with mild soap and water, rinse thoroughly, and dry completely. Do not use bleach, acid, or
other solvents on the frame parts.
 Cushions may be washed on the surface only by using mild soap and water or a commercial foaming upholstery
cleaner if necessary. If washed, rinse well and hang to dry. Do not machine wash or dry.
 We recommend the use of furniture covers when not in use.
 Inspect and tighten all bolts and fasteners on a regular basis to ensure the proper performance and safety of
your chair.
 In order to prolong the life and beauty of your chair, we recommend that it be stored in a dry and protected
area during off season periods.