Courtyard Creations RTS099W-WM User manual

RTS099W-WM
ASSEMBLY INSTRUCTIONS
ATTENTION: THIS PRODUCT IS NOT FOR COMMERCIAL USE
INTENDED FOR RESIDENTIAL USE ONLY.
PARTS LIST
PAGE 1 OF 2 COURTYARD CREATIONS INC.
Q’TYPART
PART
NO. DESCRIPTION
1
2
4
5
6
7
8
10
9
11
12
13
3
WASHER d8.5*D17*1.6
BOLT M6*35
BOLT M8*40
SEAT POST
WASHER d8.5*D12*2.1
SEAT ASSEMBLY
BASE ASSEMBLY
NUT WRENCH 10&13MM
HEX.KEY WRENCH 6MM
BOLT CAP M6
BOLT CAP M8
JAM NUT M8*1.25
WASHER d6.5*D30*2.0
17FA08060601-Y4
RFS8821-CS04
17C03A0814041Y2
17C01A0712002Y4
RTS590E-CS02
RTS099W-CS01
17FC08030801-Y2
17FA05100701-Y4
17D03A040401-Y4
18000319004
18000337002
17KAA0201----Y4
17KAB1101----Y4
4
1
1
1
1
1
1
1
4
4
1
4
4
Attention:
Make sure that each bolt needed for all steps matche s
the corresponding figure to ensure proper assembly.
FIGURE 1
#4 BOLT M8*40
40
3
1
4
6
7
10
9
4
6
7
10
9
1
3
Step 1:
Place the seat assembly (#1) onto a non-abrasive surface,
such as a carpet, with its underside facing upwards.
Fasten the seat post (#3) to the brace on the seat
assembly (#1) by using bolts (#4), washers (#6 and #7),
and jam nuts (#9). See Figure 1.
STOP DON’T RETURN TO STORE!
!
!
!
!
!
Use the correct bolts as indicated. Do not tighten any of the bolts until is completely
assembled.
Do not discard of any of the packaging until you have checked that you have all of the parts
and fittings required.
Keep children away during assembly. This item contains small parts that can be swallowed
by children. Children should always be under direct adult supervision while using this product.
Retain these assembly instructions for future reference.
Quote the following FQC NO. when contacting the service center.
SERVICE CENTER TOLL FREE NO.
TEL: [phone]
FAX: [phone]

PAGE 2 OF 2
FIGURE 2
#5 BOLT M6*35
35
Cleaning and Maintenance
•Wash frame parts with mild soap and water, rinse thoroughly, and dry completely. Do not use bleach, acid, or
other solvents on the frame parts.
•We recommend the use of furniture covers when not in use.
•Inspect and tighten all bolts and fasteners on a regular basis to ensure the proper performance and safety of
your swivel chair.
•In order to prolong the life and beauty of your swivel chair, we recommend that it be stored in a dry and
protected area during off season periods.
3
2
5
11
8
FULL ASSEMBLY
Step 3:
See Full Assembly.
STOP DON’T RETURN TO STORE!
Note:
For ease with installation, we recommend that the seat post
(#3) be slightly oiled or waxed before fastening it to the base
assembly (#2).
Step 2:
Insert the seat post (#3) into the hole in the center of the
base assembly (#2). Fasten them together by using bolt
(#5) and washer (#8). Make sure that all of the bolts have
been tightened completely and cover them with bolt caps
(#10 and #11). See Figure 2.
The store where you made your purchase
does not stock parts for this item.
If you need parts,
whether they are missing or damaged,
STOP!
Missing A Part?
No Need To Go Back To
The Store
Call us between 9:00 AM and 4:30 PM
Eastern Time Monday through Friday
Call Toll Free:
TEL: [phone]
FAX: [phone]
READ THESE INSTRUCTIONS COMPLETELY BEFORE STARTING ASSEMBLY
SEPARATE AND IDENTIFY ALL PARTS, MAKING SURE THAT YOU
HAVE ALL OF THEPARTSLISTED.
IF YOU DO NOTLOCATE ALL OF THE PARTS LISTED, INSPECT THE
PACKING MATERIAL FOR SMALL PARTSTHAT MAYHAVEBECOME
SEPARATED DURING SHIPMENT.
IF YOU EXPERIENCEANY DIFFICULTY DURING ASSEMBLYOR IF ANY
PARTS ARE MISSING OR DAMAGED,CALL THE HELP LINE AT
1-877-539-7436 BEFORERETURNING THIS ITEM TO THE STORE.
PROVIDE THEFOLLOWING INFORMATION WHEN CALLING:
1-MODEL NUMBER OF THEPRODUCT.
2-PARTNUMBER AND MATERIAL CODE OF THE PARTFROM THE PARTS
LIST.
MOST PROBLEMS CAN BERESOLVED WITHOUT RETURNING THIS
PRODUCT TO THERETAILER.