Courtyard Creations KUS850F-WM User manual

ASSEMBLY INSTRUCTIONS
ATTENTION: THIS PRODUCT IS NOT FOR COMMERCIAL USE
INTENDED FOR RESIDENTIAL USE ONLY.
#5 BOLT M6*65
65
ATTENTION: Make sure that each bolt needed for all steps matches
the corresponding figure to ensure proper assembly.
WARNING: Remove the protect cover from the seat assembly
before you begin the assembly of your bench.
STEP 1:
Place the back assembly (#1) onto a non-abrasive surface, such
as a carpet. Insert the back assembly (#1) into the seat assembly
(#2). See Figure 1.
STEP 2:
At the rear of the seat, fasten the back assembly (#1) to the seat
assembly (#2) by using bolts (#5) and washers (#9). Keep the bolts
loose at this point of assembly. See Figure 2.
FIGURE 1 FIGURE 2
KUS850F-WM
KUS850F-CS01
KUS850F-CS02
KUS8521-CS03
KUS8521-CS04
17C33A0755001Y4
17C33A0706001Y4
17C02A0755131Y4
17C33A0712001Y4
17FA05040301-Y4
18000337004
18000337006
17KAA0101----Y4
17KAA0201----Y4
61K850FX00001BA
61K850FX50001BA
61K850FY00001BA
PARTS LIST
PART
NO. MATERIAL CODE PART Q’TY PART NO. MATERIAL CODE PART Q’TY
1
2
3
4
5
6
7
8
BACK ASSEMBLY
LEFT LEG
RIGHT LEG
BOLT M6*65
BOLT M6*16
BOLT M6*14
SEAT ASSEMBLY
BOLT M6*35
WASHER d6.5*D13*1.0
BOLT CAP
PLASTIC CAP M6
HEX.KEY WRENCH 4MM
LEFT BACK CUSHION
RIGHT BACK CUSHION
SEAT CUSHION
HEX.KEY WRENCH 6MM
9
10
11
12
13
14
15
16
1
1
1
1
4
2
2
2
8
8
2
1
1
1
1
2
SERVICE CENTER TOLL FREE NO.
TEL: [phone]
FAX: [phone]
STOP DON’T RETURN TO STORE!
PAGE 1 OF 2 COURTYARD CREATIONS INC.
!
!
!
!
12
2
1
Do not discard of any of the packaging until you have checked that you have all of the parts and fittings required.
Keep children away during assembly. This item contains small parts that can be swallowed by children.
Children should always be under direct adult supervision while using this product.
Retain these assembly instructions for future reference.
Quote the following FQC NO. when contacting the service center.
59
10

14
7
11
STEP 3:
At the front of the seat assembly (#2), fasten the legs (#3 and #4)
to the seat assembly (#2) by using bolts (#6) and washers (#9).
Keep the bolts loose at this point of assembly. See Figure 3.
STEP 4:
At the front of the seat assembly (#2), fasten the legs (#3 and #4) to the
seat assembly (#2) by using bolts (#7). Keep the bolts loose at this
point of assembly. See Figure 4.
STEP 5:
Fasten the left leg (#3) and the right leg (#4) to the back assembly
(#1) by using bolts (#8) and washers (#9). See Figure 5.
Completely tighten all of the bolts and cover them with bolt caps
(#10) and plastic caps (#11).
STEP 6:
Place the cushions (#14, #15 and #16) onto the bench. Secure the
cushions to the bench by using the plastic clamps. See Figure 6.
Cleaning and Maintenance
•Wash frame parts with mild soap and water, rinse thoroughly, and dry completely. Do not use bleach, acid, or other solvents on the frame
parts.
•Cushions may be washed on the surface only by using mild soap and water or a commercial foaming upholstery cleaner if necessary. If
washed, rinse well and hang to dry. Do not machine wash or dry.
•We recommend the use of furniture covers when not in use.
•Inspect and tighten all bolts and fasteners on a regular basis to ensure proper performance and safety of your bench.
•In order to prolong the life and beauty of your bench, we recommend that it be stored in a dry and protected area during off season periods.
#6 BOLT M6*16
#8 BOLT M6*35
35
#7 BOLT M6*14
FIGURE 3 FIGURE 4
FIGURE 5 FIGURE 6
16
STOP DON’T RETURN TO STORE!
PAGE 2 OF 2
2
44
3
6910
14
15
16 16
3
2
1
89 10
4
3
NOTE:
The labels marked “L” and “R” on the legs (#3 and #4) should coincide
with Figure 3 to ensure proper assembly.
R
L
READ THESE INSTRUCTIONS COMPLETELY BEFORE STARTING ASSEMBLY
SEPARATE AND IDENTIFY ALL PARTS, MAKING SURE THAT YOU
HAVE ALL OF THEPARTSLISTED.
IF YOU DO NOTLOCATE ALL OF THE PARTS LISTED, INSPECT THE
PACKING MATERIAL FOR SMALL PARTSTHAT MAYHAVEBECOME
SEPARATED DURING SHIPMENT.
IF YOU EXPERIENCEANYDIFFICULTYDURING ASSEMBLYOR IF ANY
PARTS ARE MISSING OR DAMAGED,CALL THE HELP LINE AT 1-877-539-7436
BEFORERETURNING THIS ITEM TO THESTORE.
PROVIDE THEFOLLOWING INFORMATION WHEN CALLING:
1-MODEL NUMBER OF THEPRODUCT.
2-PARTNUMBER AND MATERIAL CODE OF THE PARTFROM THE PARTS LIST
MOST PROBLEMSCAN BERESOLVED WITHOUT RETURNING THIS PRODUCT
TO THERETAILER.
The store where you made your purchase
does not stock parts for this item.
If you need parts,
whether they are missing or damaged,
STOP!
MissingAPart?
No Need To Go Back To
The Store
Call us between 9:00 AM and 4:30 PM
Eastern Time Monday through Friday
Call Toll Free:
TEL: [phone]
FAX: [phone]