Courtyard Creations KTS712G User manual

ASSEMBLY INSTRUCTIONS
ATTENTION: THIS PRODUCT IS NOT FOR COMMERCIAL USE
INTENDED FOR RESIDENTIAL USE ONLY.
PARTS LIST
KTS712G
PART
NO. MATERIAL CODE PART Q’TY PART NO. MATERIAL CODE PART Q’TY
1
2
3
4
5
6
7
8
1
1
1
2
4
1
PAGE 1 OF 2 COURTYARD CREATIONS INC.
FIGURE 1
KTS712G-CS01-2
KTS712G-CS01-3
KTS712G-CS11-1
17C40A0705001YX
17C40A0712001YX
17KAA0101----Y4
LEFT ARM
RIGHT ARM
SEAT ASSEMBLY
BOLT M6*15
BOLT M6*35
HEX. KEY WRENCH 4MM
SERVICE CENTER TOLL FREE NO.
TEL: [phone]
FAX: [phone]
Use the correct bolts as indicated. Do not tighten any of the bolts until the chair is completely
assembled.
Do not discard of any of the packaging until you have checked that you have all of the parts and
fittings required.
Keep children away during assembly. This item contains small parts that can be swallowed by
children. Children should always be under direct adult supervision while using this product.
Retain these assembly instructions for future reference.
Quote the following FQC NO. when contacting the service center.
!
!
!
!
!
Attention:
Make sure that each bolt needed for all steps matches
the corresponding figure to ensure proper assembly.
E-2
217C02A0755001YX
BOLT M6*14
1
HEX. KEY WRENCH 10MM
17KAC3101----Y3
Step 1:
Fasten the left arm (#2) and the right arm (#3) to the
seat assembly (#1) by using bolts (#4 and #5). Keep
the bolts loose. See Figure 1.
Note:
The labels marked “L” and “R” on arms (#2 and #3)
should coincide with Figure 1 to ensure proper assembly.
3
1
2
4
5
L
R
14
#5 BOLT M6*14
15
#4 BOLT M6*15

PAGE 2 OF 2
FIGURE 2 FIGURE 3
Step 2:
Turn the chair to its upright position. At the back of the
chair, fasten the seat assembly (#1) to the arms
(#2 and #3) by using bolts (#6). See Figure 2.
Step 3:
Turn the chair to its upright position. Make sure that
all of the bolts have been tightened completely.
See Figure 3.
3
1
2
6
6
E-2
#6 BOLT M6*35
35
Cleaning and Maintenance
•Wash frame parts with mild soap and water, rinse thoroughly, and dry completely. Do not use bleach, acid, or
other solvents on the frame parts.
•We recommend the use of furniture covers when not in use.
•Inspect and tighten all bolts and fasteners on a regular basis to ensure proper performance and safety of your
chair.
•In order to prolong the life and beauty of your chair, we recommend that it be stored in a dry and protected area
during off season periods.
Warranty
• This product is covered by Courtyard Creations Inc.'s one–year limited warranty.
• Proof of purchase (dated register receipt) is required for warranty claims.
• It remains the customer’s responsibility for freight and packing charges to and from the service center.
The store where you made your purchase
does not stock parts for this item.
If you need parts,
whether they are missing or damaged,
STOP!
Missing A Part?
No Need To Go Back To
The Store
Call us between 9:00 AM and 4:30 PM
Eastern Time Monday through Friday
For further assistance,
please visit us at
[email protected]
Call Toll Free:
TEL: [phone]
FAX: [phone]
READ THESE INSTRUCTIONS COMPLETELY BEFORE STARTING ASSEMBLY
SEPARATE AND IDENTIFY ALL OF THE PARTS,MAKING SURE THAT
YOUHAVE ALL OF THEPARTSLISTED.
IF YOU DO NOTLOCATE ALL OF THE PARTS LISTED, INSPECT THE
PACKING MATERIAL FOR SMALL PARTSTHAT MAYHAVEBECOME
SEPARATED DURING SHIPMENT.
IF YOU EXPERIENCEANY DIFFICULTY DURING ASSEMBLYOR IF ANY
PARTS ARE MISSING OR DAMAGED,CALL THE HELP LINE AT
1-877-539-7436 BEFORERETURNING THIS ITEM TO THE STORE.
PROVIDE THEFOLLOWING INFORMATION WHEN CALLING:
1-MODEL NUMBER OF THEPRODUCT.
2-PARTNUMBER AND MATERIAL CODE OF THE PARTFROM THE PARTS
LIST.
MOST PROBLEMS CAN BERESOLVED WITHOUT RETURNING THIS
PRODUCT TO THERETAILER.