Covidien Valleylab FX8 Series User manual

Valleylab™FX8 Series Energy Platform
FX8 Series Energy Platform, part of the Valleylab™energy portfolio that stands for confidence.
Quick Reference Guide
Front Back
Monopolar Shared Coag Set up
Helpful Hints
Once enabled, a feature stays available until
someone disables it.
‘SOFT’ Coag can also be enabled and activated.
‘SHARED’ Coag can be used with two pencils
or one pencil and a Triverse™device.
Power Switch Foot Pedal Receptacles Speaker Output
Power Settings
Bipolar
Rear Panel
AC Inlet (2 fuses) Equipotential Ground
Airflow
Airflow
Cover
(USB/Ethernet) Ports EKG Blanking/Smoke
Evacuation Ports
UFP Monopolar 1 Monopolar 2 REM
REM Indicator
Service/Clinical Features
Volume Adjust
Restore Settings
Initial Screen
Mode Selection
Pencil Insertion and
Power Selection
1
2
3
Press ‘SETTINGS’ button
4
CUT mode power indicator
CUT mode on/off Valleylab
mode power
range selector
Slider
position
indicator
COAG mode
power indicator
Triverse™
Setup
‘SHARED’ Coag Activation
8
Press ‘CLINICAL FEATURES’ button
5
Press to enable ‘SHARED COAG’ for use
6
Press to select ‘SHARED’ Coag for use
7
Exit ‘SHARED’ Coag mode
9

Bipolar
Enabling FT modes
Helpful Hints
To enable FT MODES,
disable the FX MODES.
To return to FX MODES,
disable the FT MODES.
Bipolar has FT modes
LOW (1 – 15 Watts)
MED (16 – 40 Watts)
HIGH (45 – 95 Watts)
Bipolar has FX Modes
(default)
PRECISE (1–70 Watts)
STANDARD (1–70 Watts)
MACRO (1–70 Watts)
COVIDIEN, COVIDIEN with logo and COVIDIEN logo are U.S. and internationally registered trademarks of Covidien AG.
™*Trademark of its respective owner. Other brands are trademarks of a Covidien company.
©2017 Covidien 17-weu-fx8-energy-platform-quick-reference-guide-2052635
&
Press ‘SETTINGS’ button
1
Press ‘CLINICAL FEATURES’ button
2
Press ‘BIPOLAR’ tab
3
Press blue ‘FX MODES’ button to deselect
FX modes which enables FT modes for use Select to activate ‘FT MODE’
power setting. Helpful Hints
AUTO BIPOLAR and AMMETER must also be
ENABLED for use
- Both can be enabled, but only one can be
activated at a time in the ‘Bipolar Menu’
pop-up. Once autobipolar is activated, the
icons below will appear. (Note: the icon for
autobipolar delay will only appear if a delay
is set).
‘FT MODES’ are enabled when the button
turns gray which disables ‘FX MODES’
46
5
BIPOLAR
menu
Auto
BIPOLAR
ON
Auto
BIPOLAR
delay time