Cowon iAUDIO M3 20GB User manual

Quick Install Guide
for Windows 98SE/ME/2000/XP
Mac OS 10.x
M3
Before Installation : Please take following steps.
Are you ready to Install? Then let’s go next page.
Charing iAUDIO
1. Use only the supplied AC power adapter for safety.
2. Connect the AC Adapter to iAUDIO as shown below.

M3
2
M3
3
Connecting iAUDIO
Connecting iAUDIO
Precautions
• Use only the provided USB cable.
• Never use a USB hub.
Connecting with Extension Connector
• Connect the Extension Connector to the the bottom of iAUDIO.
• Connect the USB cable from the PC to the USB port at the bottom of the Extension Connector.
Connecting with Cradle
• Mount the iAUDIO on the Cradle.
• Connect the USB cable from the PC to the USB port at the back of the Cradle.
For Windows ME/2000/XP
To make sure that the installation was complete, check if a new hard disk has been created in ‘My Computer’ as
shown in the following picture.
Connecting USB Cable

M3
2
M3
3
For Windows 98SE
1. The E:\ drive shown in the illustration is an example, and it may be different from the actual drive name used by
your PC. It was given for your reference only.
2. Connect iAUDIO and PC with a USB cable. In the normal
Windows environment, a message saying that the iAUDIO M3
Digital Audio Player device was found will be displayed as
shown in the left picture. Click on the ‘Next’ button.
3. Check "Search the best driver for your device" and click
‘Next’.
4. Check "Specify a location" and click on the [Browse] button.
Connecting iAUDIO

M3
4
M3
5
5. From the ‘Browse’ window, select the [Win98] folder on
the iAUDIO Installation CD, and click on the ‘OK’ button.
When the model name "iAUDIO M3 Digital Audio Player"
appears on the [Add New Hardware Wizard] window as
shown in the picture, click on the [Next] button.
6. The driver les are copied and installed from the Installation
CD. When the installation nishes, a message notifying you
of completion appears as shown in the picture.
7. Finally, make sure that installation of iAUDIO M3 was
completed normally by checking "iAUDIO M3 Digital
Audio Player" displayed under Control Panel --> System
--> Device Manager --> Harddisk Controller.
Connecting iAUDIO

M3
4
M3
5
Installing JetShell
Installing JetShell
1. Insert the iAUDIO Installation CD in the CD-ROM drive. The installation program starts automatically. It may not start
automatically sometimes depending on the settings of the Windows operating system. In this case, directly run CD-ROM:
\Setup.exe or CD-ROM:\JetShell\Setup.exe.
2. When the installation nishes, JetShell is registered in Start --> Programs --> Cowon --> iAUDIO M3 program group.

Address : 20 Fairbanks, Suite 171
Irvine, CA 92618
Tel : [phone] (1-888-4JETAUD)
Homepage : www.jetaudio.com
Email : [email protected]
JetAudio Customer Service Center