Craftsman 320.16494 User manual

UNIVERSAL QUICK-RELEASE
MOUNTING BRACKETS
For Craftsman Stands
Model No. 320.16494
_WARNING" To reduce the risk of injury,
the user must read and understand the
Operator's Manual before using this product.
,A WARNING" To reduce the risk of injury,
the user must always read and follow all
instructions in the bench top tool operating
manual before mounting the tool to
this stand.
•WARRANTY
•SAFETY
•ASSEMBLY
•DESCRiPTiON
• OPERATION
• MAINTENANCE
•ESPA_IOL
Sears Brands Management Corporation, Hoffman Estates,
IL 60179 U.S.A.
www,craftsman,com

Warranty Page 2
Safety Symbols Pages 4-5
Safety Instructions Page 6
Description Page 7
Assembly Pages 8-9
Operation Pages 10-13
Maintenance Page 13
Parts List Pages 14-15
CRAFTSMAN ONE YEAR FULL WARRANTY
FOR ONE YEAR from the date of purchase, this product is warranted
against any defects in material or workmanship. With proof of purchase,
defective product will be replaced free of charge.
For warranty coverage details to obtain free replacement, visit the web
site: www.craftsman.com
This warranty is void if this product is ever used while providing commercial
services or if rented to another person.
This warranty gives you specific legal rights, and you may also have other
rights which vary from state to state.
Sears Brands Management Corporation, Hoffman Estates, IL 60179
The quick-release mounting brackets have many features for making their use more
pleasant and enjoyable. Safety, performance, and dependability have been given top
priority in the design of this product making it easy to maintain and operate.
SAVE THESE INSTRUCTIONS!
READ ALL iNSTRUCTiONS!
Page 2 16494 ManuaLRevised_12 0522

_,WARNING: Some dust created by power sanding, sawing, grinding, drilling
and other construction activities contains chemicals known to the state of
California to cause cancer, birth defects or other reproductive harm. Some
examples of these chemicals are:
• Lead from lead-based paints,
Crystalline silica from bricks and cement and other masonry products, and
Arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type
of work. To reduce your exposure to these chemicals: work in a well ventilated
area, and work with approved safety equipment, such as those dust masks that
are specially designed to filter out microscopic particles.
The purpose of safety symbols is to attract your attention to possible dangers.
The safety symbols and the explanations with them deserve your careful
attention and understanding. The symbol warnings do not, by themselves,
eliminate any danger. The instructions and warnings they give are no substitutes
for proper accident prevention measures.
16494 ManuaLRevised_12 0522 Page 3

,_ WARNING: Be sure to read and understand all safety instructions in this
Operator's Manual, including all safety alert symbols such as "DANGER",
"WARNING", and "CAUTION" before using this tool. Failure to follow all
instructions listed below may result in electric shock, fire, and/or serious
personal injury.
SYMBOL MEANING
SAFETY ALERT SYMBOL: Indicates DANGER, WARNING, OR CAUTION. May
be used in conjunction with other symbols or pictographs.
DANGER: Indicates an imminently hazardous situation, which, if not
avoided, will result in death or serious injury.
_, WARNING: Indicates a potentially hazardous situation, which, if not avoided,
could result in death or serious injury.
_, CAUTION: Indicates a potentially hazardous situation, which, if not avoided,
could result in minor or moderate injury.
Damage Prevention and information Messages
These inform the user of important information and/or instructions that could
lead to equipment or other property damage if they are not followed. Each
message is preceded by the word "NOTICE," as in the example below:
NOTICE: Equipment and/or property damage may result if these instructions are
not followed.
_WARNING: To ensure safety and reliability, all repairs should be performed
by a qualified service technician.
_WARNING: The operation of any power tools can result in
foreign objects being thrown into your eyes, which can result
in severe eye damage. Before beginning power tool operation,
always wear safety goggles or safety glasses with side shield
and a full face shield when needed. We recommend a Wide
Vision Safety Mask for use over eyeglasses or standard safety
glasses with side shields. Always use eye protection which is
marked to comply with ANSI Z87.1.
Page 4 16494 ManuaLRevised_12 0522

SAVE THESE iNSTRUCTiONS
Some of the following symbols may be used on this tool. Please study them
and learn their meaning. Proper interpretation of these symbols will allow you to
operate the tool better and more safely.
SYMBOL NAME DESIGNATION/EXPLANATION
V Volts Voltage
A Amperes Current
Hz Hertz Frequency (cycles per second)
W Watt Power
min Minutes Time
,m_j Alternating Current Type of current
Direct Current Type or a characteristic of current
n o No Load Speed Rotational speed, at no load
] Class II Construction Double-insulated construction
.../min Per Minute Revolutions, strokes, surface speed,
orbits, etc., per minute
Wet Conditions Alert Do not expose to rain or use in damplocations.
To reduce the risk of injury, user must
Read The Operator's Manual read and understand operator's manual
before using this product.
O Always wear safety goggles or safety
Eye Protection glasses with side shields and a full face
shield when operating this product.
Alert Precautions that involve
Safety your safety.
Failure to keep your hands away from the
No-Hands Symbol blade will result in serious personal injury.
No-Hands Failure to keep your hands away from the
Symbol blade will result in serious personal injury.
Failure to keep your hands away from the
No-Hands Symbol blade will result in serious personal injury.
No-Hands Symbol Failure to keep your hands away from the
blade will result in serious personal injury.
To reduce the risk of injury or damage,
Hot Surface avoid contact with any hot surface.
16494 ManuaLRevised_12 0522 Page 5

GENERAL POWER TOOL SAFETY WARNINGS
,_, WARNING: Read and understand all instructions. Failure to follow all
instructions in this Operator's Manual may result in electric shock, fire, and/or
serious personal injury.
Save all warnings and instructions for future reference.
READ AND SAVE THESE iNSTRUCTiONS
• Know your mounting brackets. Do not attempt to assemble or operate
this product until you have read the safety instructions in this section.
Keep your work area clean and well lit. Cluttered or dark areas invite accidents.
Do not permit children to use the brackets unsupervised. They are not a toy.
Always firmly attach the power tool you will use. Do not attempt to use
your stand until the power tool is fastened firmly.
Take care when moving the clamp when apower tool is mounted.
Make sure to unplug the power tool before moving your stand or
repositioning the tool
Page 6 16494 ManuaLRevised_12 0522

KNOW YOUR UNIVERSAL QUICK-RELEASE MOUNTING BRACKETS (Fig. 1)
Fig. 1 Quick-release
Cross support bar mounting bracket
Handle
Locking lever
Stand compatibility:
16491 Craftsman Miter Saw Stand with Roller Extensions
16492 Craftsman Heavy Duty Tool Stand
16490 Craftsman Deluxe Miter Saw Stand
16494 ManuaLRevised_12 0522 Page 7

A
_L WARNING: If any parts are broken or missing, do not attempt to operate the
mounting brackets until the broken or missing part is replaced. Failure to do so
could result in possible serious injury.
_WARNING: Do not attempt to modify the mounting brackets or create
accessories not recommended for use with the mounting brackets. Any such
alteration or modification is misuse and could result in a hazardous condition
leading to possible serious injury.
UNPACKING
* Carefully remove all the parts and accessories from the carton. Make sure
that all items listed in the packing list are included.
* Inspect the mounting brackets carefully to make sure that no breakage or
damage occurred during shipping.
* Do not discard the packing material until you have carefully inspected and
satisfactorily operated the brackets.
* If any parts are damaged or missing, please return the mounting brackets to
the place of purchase.
Page 8 16494 ManuaLRevised_12 0522

PACKAGE CONTENTS AND HARDWARE
item Description Quantity
A
B
Quick-release
mounting
bracket
FiJ _ iJ
©
©
©
@
Cross support
bar
2
2
Miter saw
C mounting bolt 4
Miter saw
D mounting 4
washer
Support bar
E mounting bolt 4
Support bar
F mounting 4
washer
G Spring washer 8
H Nut 8
16494 ManuaLRevised_12 0522 Page 9

These universal quick-release mounting brackets are designed for mounting
power tools on Craftsman work stands.
MOUNTING MITER SAWS
,_ WARNING: Failure to unplug the tool before attaching it to the stand could
result in accidental starting and possibly serious personal injury.
WARNING: To avoid serious personal injury,always make sure that power
tools are fully supported and securely attached to a level work surface.If
necessary, move the stand to a location where it will be more stable.
,_, WARNING: Do not mount a table saw on this stand. The direction of feed
on a table saw is perpendicular the axis of stability on this stand. Aggressive
feeding of sheet materials into a table saw could cause the stand to tip over.
Mounting Standard Miter Saws to Your Craftsman Stand
(stand sold separately)
NOTICE: This configuration allows
for miter saws on which the 4
mounting holes form a rectangular
pattern (most miter saws).
1. Mount your miter saw to
the quick-release mounting
brackets (A) using the miter
saw mounting bolts (C),
washers (D), spring washers
(G)and locking nuts (H) (Fig. 2).
2. With the miter saw securely
mounted on the quick-release
mounting brackets, place the
assembly onto the work stand
(sold separately) (Fig. 3).
C
Fig. 3
Page 10 16494 ManuaLRevised_12 0522

iNSTALLiNG THE QUICK=RELEASE MOUNTING BRACKETS ONTO STAND
1. Hold the quick-release
mounting bracket (A) by
the handles.
2. Position the area designated
"Z" in Fig. 4 onto the frame
assembly (sold separately).
3. Press the handle down to
mount the quick-release
mounting brackets (A).
4. Tighten the locking lever to
lock the mounting
brackets (A) (Fig. 5).
Fig. 4
Handle Work stand
Fig. 5 Work stand
Locking lever
16494 ManuaLRevised_12 0522 Page 11

Mounting Non=Standard
Miter Saws
NOTICE: This configuration
allows for miter saws on which
the 4 mounting holes hole form
a trapezoid pattern (some saws)
and the those on which the 3
mounting holes form a triangular
pattern (few saws).
1. Place the two support bars
(B) on the mounting brackets
(A). Use the support bar
mounting bolts (E), washers
(F), spring washers (G) and
locking nuts (H) to pre-tighten
the support bars (B) on the
quick-release mounting
brackets (A) (Figs. 6 and 7).
2. Position your miter saw with
non-standard mounting holes
on the cross support bars (B).
Check the position and adjust
the support bars slowly so
that the mounting holes on
the miter saw are aligned with
the slots on the cross support
bars (Fig. 8).
3. Use the miter saw mounting
bolts (C), washers (D), spring
washers (G) and locking nuts
(H) to securely tighten the
saw to the support bars (B).
4. Tighten the locking nuts (H)
to fully tighten the support
bars (B).
Fig. 6
E
Fig. 7
AB
Two support bars (B) installed on
mounting brackets (A)
\G
Page 12 16494 ManuaLRevised_12 0522

5. With the miter saw mounted
on the quick-release mounting
brackets (A), place the
assembly onto the work stand
(sold separately) (Fig. 9).
6. Attach the brackets to the
stand. See Installing the
Quick-Release Mounting
Brackets section.
Fig. 9
,_ WARNING: When servicing, use only identical replacement parts. Use of any
other parts may create a hazard or cause product damage.
GENERAL MAINTENANCE
Avoid using solvents when cleaning plastic parts. Most plastics are susceptible
to damage from various types of commercial solvents and may be damaged by
their use. Use clean cloths to remove dirt, dust, oil, grease, etc.
WARNING: When servicing, use only identical replacement parts. Use of any
other parts may create a hazard or cause product damage. To ensure safety and
reliability, all repairs should be performed by a qualified service technician.
_, WARNING: Keep the mounting brackets, clean, and free from oil and
grease. Always use a clean cloth when cleaning. Never use brake fluids,
gasoline, petroleum based products or any strong solvent to clean the stand.
Chemicals can damage, weaken or destroy plastic which may result in serious
personal injury.
NOTICE: If the mounting bracket
requires adjustment to mount
securely on your stand:
• Release the nut by turning
it counterclockwise.
Tighten the Phillips Screw
by turning it clockwise, and
tighten the nut by turning
it clockwise.
Fig. 10
Phillips Screw
16494 ManuaLRevised_12 0522 Page 13

UNIVERSAL QUICK=RELEASE MOUNTING BRACKETS
MODEL NO. 320.16494
The Model Number will be found on the Nameplate attached to the frame of the
universal quick-release mounting brackets. Always mention the Model Number
when ordering parts for this tool.
To order parts, call 1-800-469-4663.
15
i4
11
1
i3
12
14 18
\
lO
9
8
19 20
3
Page 14 16494 ManuaLRevised_12 0522

UNIVERSAL QUICK=RELEASE MOUNTING BRACKETS
MODEL NO. 320.16494
The Model Number will be found on the Nameplate attached to the frame of the
universal quick-release mounting brackets. Always mention the Model Number
when ordering parts for this tool.
To order parts, call 1-800-469-4663.
1 1010202004 Nut 14
2 2040107005 Mounting bracket 2
3 1020103002 Locking lever 2
4 1020801002 Connector 2
5 1021601002 Square block 2
6 1010402011 Spring bolt 2
7 1010118005 Brazier head screw 8
8 1010118006 Brazier head screw 2
9 1029901002 Clamping block 2
10 1020701001 Fixed block 2
11 1010119002 Screw 2
12 1020102001 Handle 2
13 1010108006 Bolt 4
14 1010201004 Nut 10
15 1010402012 Spring bolt 2
16 1010103010 Support bar mounting bolt 4
17 1010301030 Support bar mounting washer 8
18 1010103009 Bolt 4
19 2040307001 Cross support bar 2
20 1010303003 Spring washer 8
21 1021601001 Square block 2
22 1010301007 Plain Washer 2
16494 ManuaLRevised_12 0522 Page 15

Manual del Propietario
SOPORTES DE MONTAJE
UNIVERSALES DE LIBERACION RAPIDA
Para soportes Craftsman
Modelo N° 320.16494
,AADVERTENCIA" Para reducir el
riesgo de lesiones, el usuario debe leer
y comprender el Manual del Propietario
antes de utilizar este producto.
,AADVERTENCIA" Para reducir el
riesgo de lesiones, el usuario siempre
debe leer yseguir las instrucciones del
manual del propietario de la herramienta
antes de instalarla.
•GARANTiA
•SEGURIDAD
• MONTAJE
• DESCRIPCI6N
•OPERACI6N
• MANTENIMIENTO
• ESPA_IOL
Sears Brands Management Corporation, Hoffman Estates,
IL 60179 U.S.A.
www, ctaftsman,com

Garantia Pagina 17
Simbolos de Seguridad Paginas 19-20
Instrucciones de Seguridad Pagina 21
Descripcion Pagina 22
Montaje Paginas 23-24
Operacion Paginas 25-28
Mantenimiento Pagina 28
Lista de piezas Paginas 29-30
GARANTiA LIMITADA DE UN Ai_O CRAFTSMAN
DURANTE UN ANO desde la fecha de compra, este producto cuenta con
garantia contra cualquier clase de defectos de material o de mano de obra.
Mediante una prueba de compra, el producto defectuoso se reemplazara
sin costo alguno.
Si desea obtener detalles sobre la cobertura de garantia para solicitar
un reemplazo sin costo, visite el sitio Web: www.craftsman.com
La presente garantia quedar& anulada si este producto se usa para brindar
servicios comerciales o si se alquila a terceros.
Esta garantia le otorga derechos legales especificos y usted puede contar
con otros derechos, que pueden variar de estado a estado.
Sears Brands Management Corporation, Hoffman Estates, IL 60179
Los soportes de montaje de liberacion rapida cuentan con muchas caracteristicas
para hacer su uso mas agradable y placentero. Durante el diseSo de esta
herramienta, la seguridad, el rendimiento y la confiabilidad han sido las
prioridades principales, ademas de la sencillez de mantenimiento y de operacion.
iGUARDE ESTAS INSTRUCCIONES!
iLEA TODAS LAS INSTRUCCIONES!
16494 ManuaLRevisado_12-0522 P_gina 17

ADVERTENClA: El polvillo de lijado, aserrado, esmerilado, perforado u otras
actividades de construccion contienen productos quimicos que segOn el Estado
de California provocan cancer, defectos congenitos y otros daSos reproductivos.
Algunos ejemplos de estos productos quimicos son los siguientes:
• Plomo de pinturas a base de plomo
Silice cristalino de ladrillos, cemento y otros productos de mamposteria
Arsenico y cromo de madera tratada quimicamente.
El riesgo proveniente de estas exposiciones varia, dependiendo de la
regularidad en que realiza esta clase de trabajo. Para reducir su exposicion
a estos quimicos: Trabaje en un Area bien ventilada, con equipamiento de
seguridad apropiado, tales como las mascaras antipolvillo especialmente
dise_adas para filtrar particulas microscopicas.
El objetivo de los simbolos de seguridad es atraer su atencion sobre posibles
peligros. Los simbolos de seguridad y las explicaciones junto a elias ameritan
su cuidadosa atencion y comprension. Los simbolos de advertencia no eliminan
los peligros por si solos. Las instrucciones y advertencias que ofrecen no
reemplazan las medidas adecuadas de prevencion de accidentes.
P_gina 18 16494 ManuaLRevisado_12 0522

_, ADVERTENClA: AsegOrese de leer y comprender todas las instrucciones
de seguridad de este Manual del Propietario, incluyendo todos los simbolos
de alerta de seguridad, tales como "PELIGRO", "ADVERTENClA" y
"PRECAUClON" antes de utilizar esta herramienta. No seguir todas las
instrucciones listadas a continuacion puede generar una descarga electrica, un
incendio y/o graves lesiones corporales.
SIGNIFICADO DE LOS SiMBOLOS
SiMBOLO DE ALERTA DE SEGURIDAD: Indica PELIGRO, ADVERTENCIA o
PRECAUCION; puede utilizarse en conjunto con otros simbolos o pictogramas.
PELIGRO: Indica una situacion inminentemente peligrosa que, si no se
evita, puede provocar la muerte o una lesion grave.
ADVERTENClA: Indica una situacion potencialmente peligrosa que, si no se
evita, puede provocar la muerte o una lesion grave.
PREOAUClON: Indica una situacion potencialmente peligrosa que, si no se
evita, puede provocar una lesion menor o moderada.
Mensajes de informaci6n y de prevenci6n de daSos
Estos informan al usuario sobre informaciones y/o instrucciones importantes que
podrian provocar da_os al equipamiento o a la propiedad si no se siguen. Cada
mensaje esta precedido pot la palabra "AVISO", como en el ejemplo siguiente.
AVlSO: Pueden provocarse daSos al equipamiento y/o a la propiedad si no se
cumplen estas instrucciones.
_IL ADVERTENClA: Para garantizar la seguridad y la confiabilidad, todas las
reparaciones deben ser efectuadas pot un tecnico calificado.
ADVERTENClA: El funcionamiento de cualquier
herramienta electrica puede provocar el lanzamiento de
objetos en direccion de sus ojos, y los consecuentes graves
daSos oculares. Antes de comenzar a utilizar la herramienta
electrica, siempre use gafas o lentes de seguridad con
proteccion lateral y una proteccion completa de rostro cuando
sea necesario. Recomendamos el uso de una mascara de
seguridad de vision amplia sobre los anteojos o gafas de
seguridad estandar con proteccion lateral. Siempre utilice
proteccion ocular certificada para cumplir con ANSI Z87.1.
16494 ManuaLRevisado_12-0522 P_gina :$9

GUARDE ESTAS INSTRUCCIONES
Algunos de los siguientes simbolos pueden utilizarse en esta herramienta. Tenga a
bien estudiarlos y aprender su significado. Una interpretacion adecuada de estos
simbolos le permitir& operar la herramienta de una manera mejor y mas segura.
SJMBOLO NOMBRE DESIGNACION /EXPLICACION
V Voltios Voltaje
A Amperios Corriente
Hz Hercios Frecuencia (ciclos por segundo)
w Vatios Energia
min Minutos Tiempo
'%, Corriente alterna Tipo de corriente
Corriente continua Tipo o una caracteristica de la corriente
no Velocidad sin carga Velocidad giratoria, sin carga
[] Construcci6n Ctase N Construcci6n de dobte aislaci6n
.../min Por minuto Revoluciones, carreras, velocidad de
superficie, 6rbitas, etc., por minuto.
Aterta de condiciones No exponga a la Iluvia u otras
h0medas Iocaciones h0medas.
Para reducir el riesgo de lesiones, et usuario
Lea el manual de debe leer y comprender este manual de
operaci6n operaci6n antes de usar este producto.
O Siempre use gafas o lentes de seguridad
Protecci6n ocular con protecciones laterales y una protecci6n
de todo el rostro cuando utilice este producto.
Aterta de seguridad Precauciones que involucran su seguridad.
Simbolo de no tocar No mantener sus manos alejadas de la
con las manos sierra provocara lesiones personales graves.
Simbolo de no tocar No mantener sus manos alejadas de la
con las manos sierra provocara lesiones personales graves.
Simbolo de no tocar No mantener sus manos atejadas de la
con las manos sierra provocara lesiones personales graves.
Simbolo de no tocar No mantener sus manos atejadas de lacon las manos sierra provocara lesiones personales graves.
Superficie caliente Para reducir el riesgo de lesiones o daNos,
eviteel contacto con cualquiersuperficie caliente.
P_gina 20 16494 ManuaLRevisado_12 0522