Creative Play OCTAGONAL SHELTER RAMP User manual

OCTAGONAL SHELTER
RAMP Assembly Instructions
REF: CP001/OCT - ADDITIONAL OPTIONS & ADD ONS
pg 1 of 5
ACCESS RAMP FOR 4,5 & 6m Octagonal Shelters

REF: CP001/OCT - ADDITIONAL OPTIONS & ADD ONSN
pg 2 of 5
PARTS required
x4 (180mm brass screws)
x1 (ramp assembly) x2
x4 (80mm brass screws)
TOOLS required
x4 (angle cleats/brackets)

REF: CP001/OCT - ADDITIONAL OPTIONS & ADD ONS
pg 3 of 5
Foundation Details
SOIL
TIMBER SUPPORT POST
CONCRETE
OCTAGONAL SHELTER
SURROUND
OCTAGONAL SHELTER
SURROUND

A trench with a depth of 130mm will need to be dug around the ramp support posts
(Shown by the dashed line)
REF: CP001/OCT - ADDITIONAL OPTIONS & ADD ONS
pg 4 of 5
Foundation Details continued...
OCTAGONAL SHELTER
SURROUND

Attach the 2 x 90mm x 90mm timbers to the ramp
assembly using 180mm brass screws (2 for each support)
Attach the ramp assembly to the Octagonal Shelter
surround using angle cleats / bractets and 80mm brass screws
REF: CP001/OCT - ADDITIONAL OPTIONS & ADD ONS
pg 5 of 5
Assembly Instructions
1
2
1-2 deck boards will need to be removed to gain
access to the angle brackets
ENSURE the centre support post is positioned in the
centre of the octagonal shelter surround
The deck board (when replaced) will finish level/
flush with the top of the octagonal shelter surround