RING LIGHT
1. The LED light is powered by USB.
Plug the USB cable into an adaptor
(adaptor not supplied). Press the
power button to switch the light
on or off.
2. Press the button to cycle through
the lighting modes: Cool White,
Warm White and Mixed.
3. Adjust the brightness level by
pressing the "+" or "-" button. There
are 10 levels of brightness for each
colour mode.
1712/
TRIPOD / PHONE MOUNT
1. The phone mount can be attached by
screwing clockwise onto the
ring light.
2. To insert a phone in the mount,
simply pull the handle upwards to
loosen. Place the phone securely into
the mount and release the handle.
TRIPOD
PO Box 5658
Brendale QLD
Australia 4500
Customer Support
1800 812 261
www.crest.com.au
AUSTRALIAN OWNED
PHONE HOLDER
FLEXIBLE ARM
LED LIGHT
BRIGHTNESS +
LIGHTING MODE
BRIGHTNESS -
SWITCH ON/OFF
