Crest Audio CVLSL User manual

SELFIE
RING
LIGHT
CVLSL
SPECIFICATIONS
• 40 LED's (20 warm + 20 cold)
• Max power output 1.2W
• Light on running time 45min
• Colour temperature 3500 - 7500K
• Lithium battery: 250mAh – 3.7V
• Charging voltage DC5V

CHARGING
1. Insert the supplied micro USB cable into the charging port (3).
2. Connect the USB end to a USB power supply 5V.
3. Charge indicator will show red light while charging and will turn green
when fully charged.
USER MANUAL
1
2
3
4
5
6
Power / Mode / Brightness select button
Charging indicator
USB charging port
Anti-scratch grip
Clip mount
LED light ring
4
5
1
2
3
6

USAGE
1. Place selfie ring light over phone / laptop / tablet. Do not cover camera with light.
2. Press the Power / Mode / Brightness button (1) to turn on and adjust the mode of
the light.
3. Press and hold the Power / Mode / Brightness button (1) to adjust the brightness
level.
4. Double tap the Power / Mode / Brightness button (1) to initiate flashing mode.
TO TURN OFF / ON
Cycle through the Power / Mode / Brightness button multiple times until the light
turns off.

1712/
3
PO Box 5658
Brendale QLD
Australia 4500
Customer Support
1800 812 261
www.crest.com.au
AUSTRALIAN OWNED