Crestron DIN Rail Control Processor DIN-AP2 How to use

CrestronGreenLight™
DIN-AP2
DINRailControlProcessor
Operations & Installation Guide

This document was prepared and written by the Technical Documentation department at:
Crestron Electronics, Inc.
15 Volvo Drive
Rockleigh, NJ 07647
1-888-CRESTRON
All brand names, product names and trademarks are the property of their respective owners.
©2008 Crestron Electronics, Inc.

Crestron DIN-AP2 DIN Rail Control Processor
Contents
Crestron Green Light™ DIN Rail Control Processor: DIN-AP2 1
Introduction ...............................................................................................................................1
Features and Functions................................................................................................1
Applications.................................................................................................................4
Specifications ..............................................................................................................5
Physical Description....................................................................................................7
Industry Compliance .................................................................................................12
Setup........................................................................................................................................13
Network Wiring.........................................................................................................13
Installation.................................................................................................................13
Hardware Hookup .....................................................................................................15
Programming Software............................................................................................................19
Earliest Version Software Requirements for the PC .................................................19
Programming with Crestron SystemBuilder..............................................................20
Programming with D3 Pro.........................................................................................20
Programming with SIMPL Windows........................................................................20
Uploading and Upgrading........................................................................................................22
Establishing Communication.....................................................................................22
Programs and Firmware ............................................................................................24
Program Checks ........................................................................................................24
Problem Solving ......................................................................................................................25
Troubleshooting.........................................................................................................25
Check Network Wiring..............................................................................................29
Reference Documents................................................................................................31
Further Inquiries........................................................................................................31
Future Updates ..........................................................................................................31
Software License Agreement...................................................................................................32
Return and Warranty Policies..................................................................................................34
Merchandise Returns / Repair Service ......................................................................34
CRESTRON Limited Warranty.................................................................................34
Operations & Installation Guide – DOC. 6662A Contents •i

Crestron DIN-AP2 DIN Rail Control Processor
Crestron Green Light™ DIN Rail
Control Processor: DIN-AP2
Introduction
The DIN-AP2 is a 2-Series control processor designed for small to
medium-sized lighting and automation applications. DIN rail mounting
enables modular installation alongside Crestron®DIN Rail lighting and
automation control modules and other third-party DIN rail mountable
devices.
Features and Functions
• 2-Series control engine
• MMC memory expansion card slot
• Cresnet port - master/slave selectable
• 10/100 Ethernet | SSL encryption
• e-Control®2, SNMP, & RoomView®support
• Two bidirectional RS-232 COM ports
• Four IR/serial ports
• Eight Versiport I/O ports
• Four low-voltage relay ports
• Configurable using D3 Pro™ or Crestron SystemBuilder™
software
• 9M wide DIN rail mounting
• Requires external power supply
Operations & Installation Guide – DOC. 6662A DIN Rail Control Processor: DIN-AP2 •1

DIN Rail Control Processor Crestron DIN-AP2
2-Series Processor
Built upon Crestron’s reliable 2-Series control engine, the DIN-AP2 is
extensively programmable using Crestron’s suite of powerful
development software and vast database of drivers and software modules.
The DIN-AP2 works seamlessly with Crestron’s entire line of lighting
dimmers and shade controls, keypads and touchpanels, thermostats,
wireless gateways, and expansion modules.
DIN Rail Installation
The DIN-AP2 is designed to snap onto a standard DIN rail for
installation in a wall mount enclosure or mounted on a wall panel. Wiring
connections are made using detachable screw terminals positioned along
the top and bottom, clearly accessible from the front for easy installation
and servicing. All setup controls and connections are positioned on the
center front panel. When installed in an enclosure utilizing 45 mm
cutouts, the DIN-AP2’s front panel stays accessible while all other
connections are concealed.
System Integration
The DIN-AP2 provides for the integration of non-Crestron devices and
subsystems through a host of control interfaces. Four isolated relays and
eight Versiport I/O ports are built in to accommodate all kinds of sensors,
contactors, door strikes, and other low-voltage controls. Two
bidirectional RS-232 COM ports and four IR/serial ports allow for the
integration of everything from simple shade controllers to advanced
security systems. Additional interfaces and controllers can be added
easily using Crestron’s DIN Rail series lighting and automation modules.
Cresnet®
Cresnet is the communications backbone for Crestron lighting modules,
wall box dimmers, shade controllers, thermostats, keypads, touchpanels,
and many other devices. This flexible 4-wire bus streamlines the wiring
of a complete Crestron system. The DIN-AP2 includes a pair of Cresnet
master ports (paralleled) capable of supporting approximately 20 typical
devices. Larger systems with more than 20 devices can be handled by
adding the DIN-HUB Cresnet Distribution Hub. Connectivity for
multiple homeruns can be facilitated using one or more DIN-BLOCK
Cresnet Distribution Blocks. Additionally, at least one DIN-PWS50
2 •DIN Rail Control Processor: DIN-AP2 Operations & Installation Guide – DOC. 6662A

Crestron DIN-AP2 DIN Rail Control Processor
Cresnet Power Supply is required to power the DIN-AP2 and any
connected Cresnet devices.
Ethernet and e-Control®2
Built-in 10/100 Ethernet facilitates secure high-speed network
connectivity, enabling extensive capabilities for remote system
maintenance and control, and providing an interface to other Crestron
control systems. Native features include a built-in email client to report
system troubles and other functions to the owner or service company via
instant e-mail notification. An onboard Web server provides the
foundation for Crestron’s exclusive e-Control2 Xpanel technology,
providing secure IP-based remote control.
RoomView®and SNMP
For large facilities utilizing multiple DIN-AP2’s and other control
systems, Crestron's exclusive RoomView Help Desk software delivers a
comprehensive solution for remote monitoring and asset management.
Also, built-in SNMP support enables similar capability using third-party
network management software, allowing full control and monitoring
from the IT Help Desk or NOC in a format that is familiar to IT
personnel.
Memory Expansion
A memory card slot allows for easy expansion of the DIN-AP2's internal
memory using a MMC (Multimedia Memory Cards)-compatible memory
card up to 2 GB.
D3 Pro™ & Crestron SystemBuilder™ Software
Crestron D3 Pro and SystemBuilder software eliminates the need for
custom programming, providing a complete design, development, and
documentation solution for the lighting professional.
Operations & Installation Guide – DOC. 6662A DIN Rail Control Processor: DIN-AP2 •3

DIN Rail Control Processor Crestron DIN-AP2
Applications
The following diagram shows a DIN-AP2 in a typical application.
DIN-AP2 in a Typical Application
4 •DIN Rail Control Processor: DIN-AP2 Operations & Installation Guide – DOC. 6662A

Crestron DIN-AP2 DIN Rail Control Processor
Specifications
Specifications for the DIN-AP2 are listed in the following table.
DIN-AP2 Specifications
SPECIFICATION DETAILS
CPU 32-bit Freescale ColdFire®
Microprocessor
Memory
SDRAM
NVRAM
Flash
Removable Storage
32 MB
256 KB
8 MB
Up to 2 GB using MMC (Multimedia
Memory Cards) compatible card
(not included)
Operating System Real-time, preemptive multi-
threaded/multitasking kernel;
FAT32 file system with long names;
supports SIMPL™ Windows®and
SIMPL+®
Ethernet 10/100BaseT, auto-negotiating,
full/half duplex, static IP or
DHCP/DNS, SSL, TCP/IP, UDP/IP,
CIP, SMTP, SNMP, built-in Web
server and e-mail client; supports
Crestron e-Control®2 XPanel and
RoomView®applications
Power Requirements
Cresnet Power Usage 8.0 Watts
(0.33 Amps @ 24 Volts DC)
(Power supply sold separately)
Environmental
Temperature
Humidity
Heat Dissipation
0° to 40°C (32° to 104°F)
10% to 90% RH (non-condensing)
26 BTU/Hr
(Continued on following page)
Operations & Installation Guide – DOC. 6662A DIN Rail Control Processor: DIN-AP2 •5

DIN Rail Control Processor Crestron DIN-AP2
DIN-AP2 Specifications (Continued)
SPECIFICATION DETAILS
Enclosure Light gray polycarbonate housing
with polycarbonate label overlay,
UL94 V-0 rated, 35 mm DIN EN
60715 rail mount, DIN 43880 form
factor for enclosures with 45 mm
front panel cutout, occupies 9 DIN
module spaces (162 mm).
Dimensions
Height
Width
Depth
94.2 mm (3.71 in)
159 mm (6.26 in)
58 mm (2.28 in)
Weight 303 g (11 oz)
Available Accessories
DIN-BLOCK
DIN-HUB
DIN-PWS50
DIN Rail Series
IRP2
DIN Rail Cresnet Distribution Block
DIN Rail Cresnet Distribution Hub
DIN Rail Power Supply
DIN Rail Lighting & Automation
Control Modules
IR Emitter Probe
6 •DIN Rail Control Processor: DIN-AP2 Operations & Installation Guide – DOC. 6662A