Crestron QM-FTDC QuickMedia How to use

Crestron QM-FTDC
QuickMedia™ FlipTop Data Center
Operations & Installation Guide

This document was prepared and written by the Technical Documentation department at:
Crestron Electronics, Inc.
15 Volvo Drive
Rockleigh, NJ 07647
1-888-CRESTRON
All brand names, product names and trademarks are the property of their respective owners.
©2007 Crestron Electronics, Inc.

Crestron QM-FTDC FlipTop Data Center
Contents
QuickMedia™ FlipTop Data Center: QM-FTDC 1
Introduction ...............................................................................................................................1
Features and Functions................................................................................................1
Internal Block Diagram ...............................................................................................4
Specifications ..............................................................................................................5
Physical Description....................................................................................................7
Industry Compliance .................................................................................................15
Setup ........................................................................................................................................16
Network Wiring.........................................................................................................16
QuickMedia Wiring................................................................................................... 16
Identity Code .............................................................................................................17
Installation.................................................................................................................18
Hardware Hookup ..................................................................................................... 23
Configuration Software ...........................................................................................................25
Earliest Version Software Requirements for the PC .................................................25
Configuring with SystemBuilder............................................................................... 25
Configuring with SIMPL Windows ..........................................................................26
Example Program ......................................................................................................28
Adjusting the QM-FTDC Microphone Inputs ........................................................... 28
Uploading and Upgrading........................................................................................................ 31
Establishing Communication.....................................................................................31
Programs and Firmware ............................................................................................ 31
Program Checks ........................................................................................................ 32
Problem Solving ......................................................................................................................33
Troubleshooting......................................................................................................... 33
Check Network Wiring..............................................................................................34
Reference Documents................................................................................................35
Further Inquiries ........................................................................................................ 35
Future Updates .......................................................................................................... 36
Appendix A: International Receptacles ...................................................................................37
Appendix B: QuickMedia Installation and Compensation ......................................................38
Installation Notes....................................................................................................... 38
Compensation............................................................................................................ 38
Compatibility Charts .................................................................................................40
Return and Warranty Policies ..................................................................................................42
Merchandise Returns / Repair Service ...................................................................... 42
CRESTRON Limited Warranty.................................................................................42
Operations & Installation Guide – DOC. 6312B Contents •i

Crestron QM-FTDC FlipTop Data Center
QuickMedia™ FlipTop Data
Center: QM-FTDC
Introduction
Features and Functions
The QM-FTDC FlipTop Data Center is part of the Crestron MediaManager™ line of
network devices, room control systems and signal routing solutions. It is available in
six different models.
Models
DESCRIPTION MODEL NUMBER COLOR
QM-FTDC-B BlackDomestic Models
with Keypad QM-FTDC-BALUM Brushed Aluminum
QM-FTDC-NB-B BlackDomestic Models
without Keypad QM-FTDC-NB-BALUM Brushed Aluminum
QMI-FTDC-B BlackInternational Models
with Keypad QMI-FTDC-BALUM Brushed Aluminum
The international models accommodate a wide variety of international AC adaptors.
For simplicity within this guide, the color/button suffix and international designation
are omitted and QM-FTDC is used except where noted.
• Stylish flush-mount FlipTop housing
• Built-in engravable* keypad with 10 to 20 buttons and LEDs and dual
bargraphs (keypad models only)
• Computer RGB and stereo audio inputs
• Support for component video via the Computer input
• Signal sensing for RGB and component signals
• One RJ-45 Ethernet pass through connector
• One RJ-45 telecommunication connector
• Two RJ-11 pass through connectors
• One AC power pass through
(Continued on following page)
Operations & Installation Guide – DOC. 6312B FlipTop Data Center: QM-FTDC •1

FlipTop Data Center Crestron QM-FTDC
Features and Functions (Continued)
• Two mic inputs with phantom power (on the bottom)
• One QuickMedia™ RJ-45 connector (on the bottom)
• Two Cresnet®connectors (on the bottom)
• Low-cost, quick and easy installation
• Easy setup using Crestron SystemBuilder™ software
• Optional cable management kit
* As an option, custom-engraved buttons can be designed and obtained by using the Crestron Engraver
software. Version 2.2.2.3 and Crestron Database 16.3.4 or later are available from the Crestron
website (at http://www.crestron.com/).
FlipTop Housing
Handsomely finished in either black anodized or brushed aluminum, the QM-FTDC
mounts flush in any tabletop surface for a clean, professional appearance. The sleek
design of the “FlipTop” lid features an integrated keypad (keypad models only) to
provide programmable pushbutton control at every interface location. Wiring for the
QM-FTDC is extremely simple requiring just a single CresCAT™-QM cable (sold
separately).
Computer/Data Interface
Inputs are provided for one RGB/component signal with corresponding stereo audio
to accept a connection from a computer or other high-resolution source. In addition,
the QM-FTDC includes two RJ-11 and two RJ-45 pass through connectors to
accommodate phone, LAN and other data signals. An AC power receptacle is also
included.
Integrated Keypad (optional)
The QM-FTDC can be ordered with or without a keypad. This customizable keypad
provides 10 to 20 programmable pushbuttons for control of AV, lighting and other
functions. All button caps are engravable and include LED feedback indicators. Two
LED bargraphs are also provided to display level settings and other parameters. To
prevent accidental button presses, the keypad is automatically disabled whenever the
lid is not fully opened.
Gated Mic Preamp
Two gated microphone inputs are included via terminal block connectors located
below the table surface. Both dynamic and condenser type microphones are
supported with software switchable 48V phantom power available at both
microphone inputs. Balanced or unbalanced line level sources such as wireless
microphones can also be accommodated. Input gain and gating controls for each
microphone/line input are fully adjustable at setup and can also be controlled in real
time from a keypad or touchpanel.
QuickMedia™ Transport
Using Crestron’s revolutionary QuickMedia transport, all input signals are
transmitted from the QM-FTDC to any QuickMedia Receiver or Distribution Center
over a single inexpensive CAT5e type cable. Computer resolutions up to 1920 x
1200 pixels at 60 Hz are supported over cable runs up to 450 feet (137 meters).
Audio signals are transmitted digitally with high performance 24-bit resolution.
QuickMedia dramatically simplifies system design and installation, affording a
higher level of performance at a lower overall cost.
2 •FlipTop Data Center: QM-FTDC Operations & Installation Guide – DOC. 6312B

Crestron QM-FTDC FlipTop Data Center
NOTE: For QuickMedia wiring use CresCAT-QM, CresCAT-IM or quality
Cat5e/CAT6 cable. The maximum aggregate cable length and delay skew between
any QM transmitter (origination point) and QM receiver (endpoint) is 450 feet (137
meters) and 22 ns. A maximum of two QM midpoint devices may be inserted in a
given QM signal path (exceptions apply, refer to each respective product manual for
full details).
MediaManager™ System Integration
Whether using just one FlipTop box or several, complete system operation can be
made transparent to the end user with all signal routing occurring smoothly under the
command of the MediaManager control system. Built-in video sensing can be
utilized to trigger automatic input selection and power control. Complete
MediaManager systems are easy to design, program and adjust from start to finish
using Crestron SystemBuilder™ software.
Cresnet®
Cresnet is the communications backbone for many Crestron touchpanels, keypads,
lighting controls and other devices. The Cresnet bus is a simple, yet flexible 4-wire
network that provides rock-solid bidirectional communication and power for up to
252 Cresnet devices.
Operations & Installation Guide – DOC. 6312B FlipTop Data Center: QM-FTDC •3

FlipTop Data Center Crestron QM-FTDC
Internal Block Diagram
The following diagram represents the interfacing abilities of the QM-FTDC. This
Cresnet device uses QuickMedia technology to facilitate simplified connection of
audio, video and computer equipment. All media and control signals are routed via a
single QuickMedia cable for easy installation. A complete integrated room solution
is created with the addition of a QuickMedia receiver (such as the QM-RMCRX-BA,
sold separately) and optional keypads or touchpanels.
NOTE: The QM-FTDC is compatible with 2-Series control systems only.
Internal Block Diagram of the QM-FTDC
Microphone 1
Microphone 2
Computer Audio
Cresnet
Phantom Power Input
Gain
Computer RGB Video Signal Sensing
Cresnet
MIC 1
MIC 2
Program L
Program R
Video
QM Output
Keypad
RJ-45
Ethernet
AC Power AC Power
RJ-11 RJ-11
RJ-45
Ethernet
A/D
Converter
4 •FlipTop Data Center: QM-FTDC Operations & Installation Guide – DOC. 6312B

Crestron QM-FTDC FlipTop Data Center
Specifications
Specifications for the QM-FTDC are listed in the following table.
QM-FTDC Specifications
SPECIFICATION DETAILS
RGB/Video
Signal Types RGB and component video1
RGB Formats RGBHV, RGBS or RGsB
Video/HDTV Formats NTSC or PAL, HDTV up to 1080i/1080p1
Gain 0 dB (75 ohm termination)
Maximum Resolution 1920 x 1200 @ 60 Hz (at unity gain) with
maximum cable length of 450 feet (137
meters) and maximum compensation at
receiver
Audio
Features Stereo audio input,
2-channel gated mic preamp
Mic Input Gain 0 to 100% (40 dB range) plus mute
Gate Level (Threshold) 0 to 100%
Attack 0 to 100 ms
Decay (Release) 0 to 5000 ms
A-D Conversion Burr Brown 24-bit, 48 kHz
Frequency Response 20 Hz to 20 kHz
Power Requirements
Cresnet Power Usage 8 Watts (0.33 Amp @ 24 Volts DC)
Default Net ID 1A
Minimum 2-Series Control
System Update File2, 3
Version 3.137 (for QM-RMCRX-BA) or later
Environmental
Temperature 41° to 104°F (5° to 40°C)
Humidity 10% to 90% RH (non-condensing)
Enclosure Black painted metal with black anodized or
brushed aluminum cover; flush tabletop
mountable
Dimensions (Domestic Models)
Height 5.39 in (13.69 cm) – with lid closed
Width 6.75 in (17.14 cm)
Depth 5.71 in (14.50 cm) – without mounting
brackets
Dimensions
(International Models)
Height 5.58 in (14.17 cm) – with lid closed
Width 8.50 in (21.58 cm)
Depth 6.67 in (16.95 cm) – without mounting
brackets
(Continued on following page)
Operations & Installation Guide – DOC. 6312B FlipTop Data Center: QM-FTDC •5

FlipTop Data Center Crestron QM-FTDC
QM-FTDC Specifications (Continued)
SPECIFICATION DETAILS
Weight (Domestic Models) 4.05 lbs (1.84 kg)
Weight (International Models) 4.80 lbs (2.18 kg)
Available Models (Domestic)
QM-FTDC-B QuickMedia FlipTop Data Center with
Keypad, Black Anodized
QM-FTDC-BALUM QuickMedia FlipTop Data Center with
Keypad, Brushed Aluminum
QM-FTDC-NB-B QuickMedia FlipTop Data Center,
no Keypad, Black Anodized
QM-FTDC-NB-BALUM QuickMedia FlipTop Data Center,
no Keypad, Brushed Aluminum
Available Models (International)
QMI-FTDC-B QuickMedia FlipTop Data Center with
Keypad, Black Anodized
QMI-FTDC-BALUM QuickMedia FlipTop Data Center with
Keypad, Brushed Aluminum
Available Accessories
FT-BTNB-L (1) Large engravable button cap4
FT-BTNB-S (2) Small engravable button caps4
QM-FTCMK FlipTop Cable Management Kit
QMI-FTCMK FlipTop Cable Management Kit
(International version)
International Adaptors for
QMI-FTDC models
Refer to “Appendix A: International
Receptacles” on page 37.
1. Component video or HDTV may require a suitable VGA-to-component adaptor or breakout cable (not
included).
2. The latest software versions can be obtained from the Crestron website. Refer to the NOTE following
these footnotes.
3. Crestron 2-Series control systems include the AV2 and PRO2. Consult the latest Crestron Product
Catalog for a complete list of 2-Series control systems.
4. Keypad models only.
NOTE: Crestron software and any files on the website are for authorized Crestron
dealers and Crestron Authorized Independent Programmers (CAIP) only. New users
may be required to register to obtain access to certain areas of the site (including the
FTP site).
6 •FlipTop Data Center: QM-FTDC Operations & Installation Guide – DOC. 6312B

Crestron QM-FTDC FlipTop Data Center
Physical Description
This section provides information on the connections, controls and indicators
available on your QM-FTDC.
Refer to the physical views shown below.
QM-FTDC Physical View (Top Open)
QM-FTDC Overall Dimensions (Top View) QMI-FTDC Overall Dimensions (Top View)
6.75 in
(17.14 cm)
5.08 in
(12.89 cm)
5.71 in
(14.50 cm)
8.50 in
(21.58 cm)
6.83 in
(17.34 cm)
6.67 in
(16.95 cm)
Operations & Installation Guide – DOC. 6312B FlipTop Data Center: QM-FTDC •7

FlipTop Data Center Crestron QM-FTDC
QM-FTDC-NB (Top View)
NOTE: The physical dimensions of the NB models are identical to the models with
keypad.
QM-FTDC Overall Dimensions (Front View) QMI-FTDC Overall Dimensions (Front View)
5.22 in
13.24 cm
6.25 in
15.87 cm
8.00 in
20.31 cm
7.05 in
17.90 cm
8 •FlipTop Data Center: QM-FTDC Operations & Installation Guide – DOC. 6312B

Crestron QM-FTDC FlipTop Data Center
QM-FTDC (Bottom View) QMI-FTDC (Bottom View)
QM-FTDC Overall Dimensions (Rear View) QMI-FTDC Overall Dimensions (Rear View)
2.32 in
(5.88 cm)
4.32 in
(10.96 cm)
5.39 in
(13.69 cm)
4.58 in
(11.61 cm)
5.58 in
(14.17 cm)
2.99 in
(7.60 cm)
Operations & Installation Guide – DOC. 6312B FlipTop Data Center: QM-FTDC •9

FlipTop Data Center Crestron QM-FTDC
QM-FTDC Overall Dimensions (Side View) QMI-FTDC Overall Dimensions (Side View)
4.64 in
11.77 cm
5.21 in
13.23 cm
6.17 in
15.68 cm
5.51 in
14.00 cm
QM-FTDC Connectors, Controls & Indicators
(Top View)
QM-FTDC Connectors, Controls & Indicators
(Bottom View)
56789
4
2
3
1
11 12 13 14 15 16 17
10
10 •FlipTop Data Center: QM-FTDC Operations & Installation Guide – DOC. 6312B

Crestron QM-FTDC FlipTop Data Center
Connectors, Controls & Indicators
# CONNECTORS1,
CONTROLS &
INDICATORS
DESCRIPTION
1 KEYPAD2Programmable keypad allowing variable
combinations of large and small engravable
buttons, 10 minimum (all large) to 20
maximum (all small); ships with 10 large
buttons (small buttons and engraving sold
separately)
(1) red LED per button, programmable
2 PWR LED2(1) green LED, indicates 24 Volts DC power
supplied from Cresnet control network
3 NET LED2(1) yellow LED, indicates communication with
Cresnet system
4 BARGRAPHS2(2) red 8-segment LED bargraphs,
programmable
5
(QM)
125V (1) grounded AC socket, AC power pass-
through outlet
Maximum load: 10 Amps @ 125 Volts AC,
50/60 Hz
5
(QMI)
MAX 250V
(1) grounded AC socket, AC power pass-
through outlet
Specify socket type: PWR-AU-B
(Australia/China), PWR-EU-B (Europe
“Schuko”), PWR-FR-B (France), PWR-IT-B
(Italy) or PWR-UK-B (UK)
Maximum load: 10 Amps @ 250 Volts AC,
50/60 Hz
6 AUDIO
(1) 3.5 mm TRS mini phone jack
Unbalanced stereo line-level audio input
Input impedance: 10k ohms
Minimum input level: 1 Vrms
7 PHONE (1 – 3)
123
(1) 8-pin RJ-45 female Ethernet LAN pass-
through
(2) 6-pin RJ-11 female, telephone pass-
through jacks
Use the label set (included) to change the
designation of these ports
8 COMPUTER3
Pin 1
Pin 6
Pin 15
(1) DB15HD female
RGB(VGA)/component video4input
Formats: RGBHV, RGBS, RGsB, YPbPr
Input impedance: 75 ohms
H/V sync impedance: 1k ohms
Maximum input level: 1 Vp-p
Maximum H/V sync level 5 Vp-p
Signal detection on H, Y and Gs
(Continued on following page)
Operations & Installation Guide – DOC. 6312B FlipTop Data Center: QM-FTDC •11

FlipTop Data Center Crestron QM-FTDC
Connectors, Controls & Indicators (Continued)
# CONNECTORS1,
CONTROLS &
INDICATORS
DESCRIPTION
9 LAN
81
(1) 8-pin RJ-45 female, Ethernet LAN pass-
through jack for connection to Ethernet,
providing local area network or Web access
(cable not included)
PIN SIGNALS
1 TD+
2 TD-
3 RD+
4 Connected to pin 5
5 Connected to pin 4
6 RD-
7 Connected to pin 8
8 Connected to pin 7
10
(QM)
125 V (1) 6 foot grounded AC line cord
Passes through to front panel AC power
outlet
10
(QMI)
MAX 250 V (1) IEC socket
Passes through to front panel AC power
outlet
11 NET
Four-position terminal block connector for
data and power. Connects to Cresnet control
network.
Pin 1 (24) Power
Pin 2 (Y) Data
Pin 3 (Z) Data
Pin 4 (G) Ground
12 SETUP LED &
BUTTON
(1) red LED and miniature pushbutton, used
for touch-settable ID (TSID)
Used for setting network ID during initial
configuration or when the device is being
added/replaced.
13 PHONE (1 – 3)
123
(1) 8-pin RJ-45 female Ethernet LAN pass-
through
(2) 6-pin RJ-11 female, telephone pass-
through jacks
Use the label set (included) to change the
designation of these ports (bottom labels should
match top labels)
(Continued on following page)
12 •FlipTop Data Center: QM-FTDC Operations & Installation Guide – DOC. 6312B

Crestron QM-FTDC FlipTop Data Center
Connectors, Controls & Indicators (Continued)
# CONNECTORS1,
CONTROLS &
INDICATORS
DESCRIPTION
14 MIC/LINE (1 – 2)
G
-+-
+
(2) 5-pin 3.5 mm detachable terminal blocks
(2) balanced microphone/line inputs
Balanced mic input level: -60 to - 20 dBV
nominal
Balanced line input level: -28 to + 12 dBV;
4 Vrms maximum
Unbalanced line input level: -34 to + 6 dBV;
2 Vrms maximum
Mic input impedance: 10k ohms, accepts 60
to 600 ohm source
Line input impedance: 22k ohms balanced,
11k ohms unbalanced
Phantom power: 10 mA (total) @ 48 Volts
DC, software enabled to both MIC inputs
15 QM5
81
(1) 8-wire RJ-45 female, QuickMedia output
port
Connects to QM input port of any
QuickMedia device via CresCAT-QM or
CresCAT-IM cable6
16 LAN
81
(1) 8-pin RJ-45 female, Ethernet LAN pass-
through to front panel LAN ports (cable not
included)
PIN SIGNALS
1 TD+
2 TD-
3 RD+
4 Connected to pin 5
5 Connected to pin 4
6 RD-
7 Connected to pin 8
8 Connected to pin 7
17 GROUND (1) 6-32 screw, chassis ground lug
1. Interface connectors for NET and MIC/LINE ports are provided with the unit.
2. Keypad models only.
3. Refer to the following table for RGB DB15HD pin assignments:
PIN FUNCTION PIN FUNCTION PIN FUNCTION
1 Red Video 6 Red Ground 11 No Connect
2 Green Video 7 Green Ground 12 Monitor Sense 1
3 Blue Video 8 Blue Ground 13 Horizontal Sync
4 Reserved 9 No Connect 14 Vertical Sync
5 Ground 10 Ground 15 Monitor Sense 2
4. Component video or HDTV may require a suitable VGA-to-component adapter or breakout cable (not
included).
Operations & Installation Guide – DOC. 6312B FlipTop Data Center: QM-FTDC •13

FlipTop Data Center Crestron QM-FTDC
5. The eight-pin RJ-45 QuickMedia transport port accepts CAT5E/CAT6 carrying audio, video and
microphone signals. The QM input port conforms to the 568B wiring standard. Refer to the following
table for connector pinouts.
RJ-45 PIN
NUMBER
WIRE COLORS
(EIA 568B) QM ASSIGNMENT: RGB
QM ASSIGNMENT:
COMPOSITE, S-VIDEO,
COMPONENT AND AUDIO
1 WHITE/ORANGE
- RGB RED - CHROMINANCE (- Pr)
2 ORANGE + RGB RED + CHROMINANCE (+ Pr)
3 WHITE/GREEN
- RGB GREEN - LUMINANCE (- Y)
4 BLUE + DIGITAL AUDIO + AUDIO
5 WHITE/BLUE - DIGITAL AUDIO - AUDIO
6 GREEN + RGB GREEN + LUMINANCE (+ Y)
7 WHITE/BROWN
- RGB BLUE - COMPOSITE (- Pb)
8 BROWN + RGB BLUE + COMPOSITE (+ Pb)
6. For QuickMedia wiring use CresCAT-QM, CresCAT-IM or quality CAT5e/CAT6 cable; the
maximum aggregate cable length and delay skew between any QM transmitter (origination point) and
receiver (endpoint) is 450 feet (137 meters) and 22 ns; a maximum of two QM midpoint devices may
be inserted in a given QM signal path (exceptions apply, refer to each respective product manual for
full details).
14 •FlipTop Data Center: QM-FTDC Operations & Installation Guide – DOC. 6312B

Crestron QM-FTDC FlipTop Data Center
Industry Compliance
This product (QM- only) is Listed to applicable UL Standards and requirements by
Underwriters Laboratories Inc.
(E300530)
As of the date of manufacture the QM-FTDC has been tested and found to comply
with specifications for CE marking and standards per EMC and
Radiocommunications Compliance Labelling.
NOTE: This device complies with part 15 of the FCC rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful interference and
(2) this device must accept any interference received, including interference that may
cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
 Reorient or relocate the receiving antenna.
 Increase the separation between the equipment and receiver.
 Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
 Consult the dealer or an experienced radio/TV technician for help.
Operations & Installation Guide – DOC. 6312B FlipTop Data Center: QM-FTDC •15

FlipTop Data Center Crestron QM-FTDC
Setup
Network Wiring
When wiring the network, consider the following:
• Use Crestron Certified Wire.
• Use Crestron power supplies for Crestron equipment.
• Provide sufficient power to the system.
CAUTION: Insufficient power can lead to unpredictable results or damage
to the equipment. Please use the Crestron Power Calculator to help calculate
how much power is needed for the system
(http://www.crestron.com/calculators).
• For larger networks, use a Cresnet Hub/Repeater (CNXHUB) to maintain
signal quality.
For more details, refer to “Check Network Wiring” on page 34.
QuickMedia Wiring
The Crestron QuickMedia cable (sold under the name “CresCAT-QM”) contains one
CAT5E cable and one Cresnet cable in Siamese jackets. Installation of any QM
device is as simple as installing CresCAT-QM wires from the output of one device to
the input of another. Installations are flexible, affordable and fast. For more
information, refer to the latest revision of the Crestron MediaManager Applications
Guide (Doc. 6244), which is available for download from the Crestron website
(www.crestron.com/manuals).
CresCAT-QM Cable
CresCAT-QM
Cable
NOTE: Do not untwist the two wires in a single pair for more than 1/3-1/2”
(0.84-1.27 cm) when making a connection. The twists are critical to canceling out
interference between the wires.
16 •FlipTop Data Center: QM-FTDC Operations & Installation Guide – DOC. 6312B