Crown PZM-12SP Installation guide

PROFESSIONAL MODEL 12SP (now discontinued)
Crown’s PZM-12SP [now the PZM-30D] model offers studio quality in recording, sound
reinforcement, broadcasting and electronic news gathering for the experienced professional.
The 12SP is designed for phantom powering by a supply providing 12 to 48 volts. It features a
transformer balanced, low-impedance output and an integral XLR connector; wide, smooth
frequency response with high-frequency emphasis for brilliance; low noise and high output level;
a hemispherical pickup pattern; high sensitivity and excellent reach for clear pickup of distant
sounds.
In operation, the ruggedly constructed 12SP can be placed on a surface such as a floor, table, or
lectern; used as a hand-held microphone; or affixed to a surface near a sound source such as the
underside of a raised grand piano lid.
The PZM-12SP has a bright, crisp sound like the PZM-30GP, but is designed for somewhat
different applications. Since it weighs very little, the 12SP can be safely attached to ceilings or
suspended panels. And it includes a handle for easy stand mounting -- say, over drums.
The housing and plate are made of conductive carbon-filled nylon, which provides better RF
shielding than other lightweight alternatives. Being non-resonant, this material doesn’t “ring” when
subjected to shock. The integral handle permits the microphone to be hand-held, stand-mounted,
or simply laid on any hard surface. Built-in electronics adapt the unit for phantom powering.
Specifications are similar to those of the PZM-30D when its frequency-response switch is set to
"Rising".