Cuckoo CP-QN1401SW/WHCBMYCI User manual

CUCKOO Electric Water Purifier
CP-QN1401SW/WHCBMYCI
User Manual

2
Merits of CUCKOO Water Purifier
4-Step Filtering System
The 4-step filtering system of CUCKOO Water Purifier dispenses clean and healthy water.
External Valve (for separate sale)
You can use the purified water also in your kitchen as the product is equipped with the External Valve.
Child Lock Button
We have applied a separate Child Lock Button to prevent children and other people from suffering burns.
Stainless Steel Water Tank
We have increased the cleanliness in the water filtration process and the Tank by making the
Water Tank with stainless steel.
Thank you for purchasing CUCKOO Water Purifier.
Please keep this User Manual (including the Warranty) for your
reference. This manual will guide you when you have any questions
during use or when the product does not work properly.
To our customers!
Economical Eco-Friendly Water Filtration System
We have applied a very economical and eco-friendly water filtration system without any
wasted water during filtering process by using the Nano Positive Filter.
Separate Power Supply Switches for hot and cold water
The product is economical in enabling the hot water power and the cold water power to be
turned ON and OFF separately.
Operation Status Indicator
It is convenient as you can see the operation status of the product through the Operation
Status Display Lamp.

Merits of CUCKOO Water Purifier
4-Step Filtering System
The 4-step filtering system of CUCKOO Water Purifier dispenses clean and healthy water.
External Valve (for separate sale)
You can use the purified water also in your kitchen as the product is equipped with the External Valve.
Child Lock Button
We have applied a separate Child Lock Button to prevent children and other people from suffering burns.
Stainless Steel Water Tank
We have increased the cleanliness in the water filtration process and the Tank by making the
Water Tank with stainless steel.
Thank you for purchasing CUCKOO Water Purifier.
Please keep this User Manual (including the Warranty) for your
reference. This manual will guide you when you have any questions
during use or when the product does not work properly.
To our customers!
Economical Eco-Friendly Water Filtration System
We have applied a very economical and eco-friendly water filtration system without any
wasted water during filtering process by using the Nano Positive Filter.
Separate Power Supply Switches for hot and cold water
The product is economical in enabling the hot water power and the cold water power to be
turned ON and OFF separately.
Operation Status Indicator
It is convenient as you can see the operation status of the product through the Operation
Status Display Lamp.
CONTENTS
Before Use
Warnings for Safe Use
Cautions for Safe Use
Name of Parts/Components Information
Filtration Circuit/ Water Filtration System
Details to Check before Installation
How To Install the Product
Details To Check before Use
How To Use
How To Clean the Cold Water Tank
How To Clean Tray
How To Replace the Filter
Expected Filter Replacement Cycle /
Recommendations / Filter Arrangement
Please check before asking for support
Product Specifications
4~7
8
9
10
11
12
13~14
14~17
18~20
21
22 ~24
25
26~27
28
Before Asking for Support
Service Guide
How to Use

Warnings for Safe Use
4
•This symbol is to remind you to be cautious about a
potentially dangerous situation under special
circumstances.
•Please read the details carefully and follow the
instructions to avoid dangerous situations.
•This symbol is used to indicate actions that are prohibited.
Potentially dangerous situation that can
cause serious injuries or death if not avoided.
Potentially dangerous situation that can
cause minor injuries if not avoided. •This symbol is used to indicate 'instructed' actions.
Please comply with the 'Warnings for Safe Use' as they are provided to ensure safe and proper use of the
product and prevent accidents and dangerous situations.
The 'Warnings for Safe Use' are made of 'Warning' and 'Caution', which mean the following respectively:
Do not excessively
bend, tie, or pull the
Power Cord.
•It may cause electric shock
or fire due to a short circuit.
Check t he condition of the Power
Cord on a frequent basis.
Remove the foreign
substances on the
Power Plug with a dry
cloth.
•They may cause electric shock,
shock, and fire.
•Check t he condition of the Power
Plug on a frequent basis.
Use only a Power Outlet
exclusively for alternating
current voltage of 220V-
240V at the rated current
of 1 0A or higher with
ground connection.
Do not put the Power Plugs of
several products in one Power Outlet.
•If you use a Power Out let for several products or use the
Power Outlet also for any other device at t he same time,
it may cause heat, fire, and electric shock. Please check the
condit ion of the Power Outlet on a frequent basis.
•When t here are foreign substances or moisture on the
Power Plug, wipe them out before use.
•Use only an extension cord of 1 0A or higher.
If the Power Cord or the
Power Plug is damaged or
the Power Outlet is shaky,
stop using them and
contact our Customer
Service Center.
•Carelessness during use may cause the Power Cord to be
peeled off or chopped and cause fire and electric shock.
Thus, frequent ly check t he condition of t he Power Cord,
Power Plug, and Power Outlet.
•When t he Power Cord or t he Power Plug is damaged, have
them replaced by t he manufacturer, the seller, or a qualified
technician (t he service provider) to prevent danger.
•Have the product repaired by the designat ed Service
Center. It may cause electric shock, short circuit, and fire.
About Power Supply
Warning
Caution
Warning Do not
Warnings for Safe Use
5
www.cuckoo.com.my
•There is a risk of malfunction or elect ric shock.
Check t he condition of the Power Plug and the
Power Cord on a frequent basis.
Turn the power OFF
through the Power
Supply Button.
Also, pull the Power
Plug out when you are
repairing or checking the
product or replacing a part.
If you do not use the
product for a long
time, close the Tap
Water Supplying Valve,
drain all the water inside
the Tank, and pull the
Power Plug out.
•If you do not do so, it may cause electric
shock or fire. Check the condition of t he Power Plug and
the Power Cord on a frequent basis.
•Refer to the ' M atters To Check before Use' when you are
reusing it .
Prevent the Power
Cord from being under
a heavy thing or
getting in contact with
a sharp edge,
and avoid having
it damaged by pets.
•If the power cord is damaged, it may
cause electric shock or fire.
Please check the st ate of t he power cord frequently.
•This may cause electric shock or fire.
Please check the st ate of t he power cord and plug
frequent ly.
If the power supply
area is wet, unplug
the product and let it
dry completely before
use.
•There is a risk of elect ric shock
or malfunction. Check t he condition
of the Power Plug and t he Power Cord
on a frequent basis.
Pull the Plug out when
there is water leak or
when you are cleaning
the product.
Pull the Power Plug by
holding the Power
Plug itself, not the
Power Cord.
•An impact to the Power Cord
may cause electric shock and fire.
Check t he condition of the Power Plug
and t he Power Cord on a frequent basis.
About Power Supply
Do not plug or unplug
the power plug with wet
hands.
•If you hold the Power Plug with a wet
hand, it may cause electric shock.
Pulling the power cord by excessive force can
damage the cord, causing a short circuit or electric shock.
•Check t he condition of the Power Plug and the Power Cord
on a frequent basis.
Use only one for the
alternating current
voltage of 220V-240V.
•This may cause electric
shock or fire.
•The product will not operate
properly.
•Please check the st ate of t he power
cord and plug frequently.
Warning Do not

Warnings for Safe Use
4
•This symbol is to remind you to be cautious about a
potentially dangerous situation under special
circumstances.
•Please read the details carefully and follow the
instructions to avoid dangerous situations.
•This symbol is used to indicate actions that are prohibited.
Potentially dangerous situation that can
cause serious injuries or death if not avoided.
Potentially dangerous situation that can
cause minor injuries if not avoided. •This symbol is used to indicate 'instructed' actions.
Please comply with the 'Warnings for Safe Use' as they are provided to ensure safe and proper use of the
product and prevent accidents and dangerous situations.
The 'Warnings for Safe Use' are made of 'Warning' and 'Caution', which mean the following respectively:
Do not excessively
bend, tie, or pull the
Power Cord.
•It may cause electric shock
or fire due to a short circuit.
Check t he condition of the Power
Cord on a frequent basis.
Remove the foreign
substances on the
Power Plug with a dry
cloth.
•They may cause electric shock,
shock, and fire.
•Check t he condition of the Power
Plug on a frequent basis.
Use only a Power Outlet
exclusively for alternating
current voltage of 220V-
240V at the rated current
of 1 0A or higher with
ground connection.
Do not put the Power Plugs of
several products in one Power Outlet.
•If you use a Power Out let for several products or use the
Power Outlet also for any other device at t he same time,
it may cause heat, fire, and electric shock. Please check the
condit ion of the Power Outlet on a frequent basis.
•When t here are foreign substances or moisture on the
Power Plug, wipe them out before use.
•Use only an extension cord of 1 0A or higher.
If the Power Cord or the
Power Plug is damaged or
the Power Outlet is shaky,
stop using them and
contact our Customer
Service Center.
•Carelessness during use may cause the Power Cord to be
peeled off or chopped and cause fire and electric shock.
Thus, frequent ly check t he condition of t he Power Cord,
Power Plug, and Power Outlet.
•When t he Power Cord or t he Power Plug is damaged, have
them replaced by t he manufacturer, the seller, or a qualified
technician (t he service provider) to prevent danger.
•Have the product repaired by the designat ed Service
Center. It may cause electric shock, short circuit, and fire.
About Power Supply
Warning
Caution
Warning Do not
Warnings for Safe Use
5
www.cuckoo.com.my
•There is a risk of malfunction or elect ric shock.
Check t he condition of the Power Plug and the
Power Cord on a frequent basis.
Turn the power OFF
through the Power
Supply Button.
Also, pull the Power
Plug out when you are
repairing or checking the
product or replacing a part.
If you do not use the
product for a long
time, close the Tap
Water Supplying Valve,
drain all the water inside
the Tank, and pull the
Power Plug out.
•If you do not do so, it may cause electric
shock or fire. Check the condition of t he Power Plug and
the Power Cord on a frequent basis.
•Refer to the ' M atters To Check before Use' when you are
reusing it .
Prevent the Power
Cord from being under
a heavy thing or
getting in contact with
a sharp edge,
and avoid having
it damaged by pets.
•If the power cord is damaged, it may
cause electric shock or fire.
Please check the st ate of t he power cord frequently.
•This may cause electric shock or fire.
Please check the st ate of t he power cord and plug
frequent ly.
If the power supply
area is wet, unplug
the product and let it
dry completely before
use.
•There is a risk of elect ric shock
or malfunction. Check t he condition
of the Power Plug and t he Power Cord
on a frequent basis.
Pull the Plug out when
there is water leak or
when you are cleaning
the product.
Pull the Power Plug by
holding the Power
Plug itself, not the
Power Cord.
•An impact to the Power Cord
may cause electric shock and fire.
Check t he condition of the Power Plug
and t he Power Cord on a frequent basis.
About Power Supply
Do not plug or unplug
the power plug with wet
hands.
•If you hold the Power Plug with a wet
hand, it may cause electric shock.
Pulling the power cord by excessive force can
damage the cord, causing a short circuit or electric shock.
•Check t he condition of the Power Plug and the Power Cord
on a frequent basis.
Use only one for the
alternating current
voltage of 220V-240V.
•This may cause electric
shock or fire.
•The product will not operate
properly.
•Please check the st ate of t he power
cord and plug frequently.
Warning Do not

Warnings for Safe Use
7
www.cuckoo.com.my
• It m ay cause a dam age t o t he
product . Check the condit ion of
the Pow er Cord on a f requent basis.
Do not disassemble or
remodel the product.
• It m ay cause fire or elect ric shock.
• Do not let anyone other than a
service provider disassemble or
collect the product .
• Contact Custom er S ervice cent er for
repair and AS service.
During use, prevent your hands or other
body parts from contacting the Condenser
part at the back of the product as it is hot.
• If you do not do so, it may cause burns or accidents.
Do not turn ON the "Hot" button and the " Cold"
button when there is no water inside the Tank.
• Do not t urn ON the " Hot " butt on and t he " Cold" but t on.
• Check frequent ly if wat er is cut off or the Tap W at er
Supplying Valve is closed, and do not turn ON the
“Cold” and “Hot ” butt ons wit h no wat er inside the Tank.
Turn ON the “C old” and “Hot ” butt ons aft er filling the
Tank w it h wat er up to the Full Wat er Level.
• If the H ot but t on is pressed when the t ank is em pty,
the safet y product will be turned on aut om at ically to
prevent the heater f rom running. This will cause
lukewarm wat er to be extract ed. Please cont act
Cust om er Service C ent er.
Do not put an electric
heating appliance such
as a microwave oven
and an electric oven
toaster or inflammables
such as candlelight, gas
can, and lighter on the product.
When you move the
product, do not pull
the Power Cord or
connecting tube or
hold the Faucet part.
• There is a risk of fire, elect ric shock or accident s.
• If those t hings go int o the
product , it m ay cause a danger
of fire or dam age t o t he product .
Do not put drugs, water
bottle, small metal things,
etc. on the product.
• The hot water is very hot
and it may cause burns.
Thus, avoid touching the
hot water wit h your hands
and be caut ious when
children and t he elderly and the
infirm are using t he product .
Be careful when using
hot water.
Let only the service provider from our Service
Center do the installation and disassembly of
the product.
If water leaks from the
inside of the product
or water is collected
around the product,
close the Tap Water
Supplying Valve, turn
OFF the Power Supply
Button, pull out the Power
Plug, and then contact our
Customer Service Center.
• There is a risk of elect ric shock.
Warning Instruction
Warning Do not
• There is a risk of fire.
If a burning smell or
smoke comes out from
the product, pull out the
Power Plug, close the
Tap Water Supplying
Valve, and contact our
Customer Service Center.
• If you do not do so, it may cause t he perform ance of
the product to be inefficient.
Install the product
where the length of
the Tap Water
Supplying Tube
connected to the
product will be 5m or
shorter from the Tap
Water Supplying Valve.
• It m ay cause colour changes
or discolouration.
• Check the condit ion of the Power
Cord on a f requent basis.
Install the product
avoiding direct sunlight
and high temperature.
Warnings for Safe Use
6
Do not install the
product at a place
t where he temperature
goes down to 0℃ or
lower or outdoors.
• It m ay cause t he Filt er or the
int ernal com ponent s t o freeze,
causing malf unct ion of the product .
When the surrounding temperature goes
down to 0℃ or lower in winter, sometimes
the water inside the Filter and the Tubing
Line may freeze, leading to damage.
Thus, prevent the surrounding temperature
of the place of installation from going
down to 0℃ or lower.
• W hen the surrounding tem perat ure goes dow n to 0℃
or lower and t ap water freezes not to be supplied
norm ally, turn OFF the hot water for saf et y.
Do not install the
product on a bumpy or
inclined surface, liner,
sitting cushion,
or linoleum.
•
I
• This fixed type product should be fixed when you use.
t may cause product malfunction,
unwanted noise or injury.
Please check the condit ion of t he
product on a f requent basis.
Use tap water as the
supplying water,
and install the Tap
water supplying valve
to the “Cold” water pipe.
• Do not use underground water
or any ot her water t han tap wat er.
• The replacem ent cycle of the filt er will vary according
to the region and the am ount of wat er use.
• Connect ing the wat er supply valve t o the hot wat er
pipe may cause dam age t o the filt er or m alfunct ion of
the product .
Installation Issues
• If you do not do so,
it m ay cause electric shock
or fire.
Please avoid the area
where there is high
moisture and dust.
Do not install the product near a bathroom.
Warning Do not
Do not install the
product where gas
may leak or
somewhere near to
an air conditioner or a
heater.
• There is a risk of explosion or fire.

Warnings for Safe Use
7
www.cuckoo.com.my
• It m ay cause a dam age t o t he
product . Check the condit ion of
the Pow er Cord on a f requent basis.
Do not disassemble or
remodel the product.
• It m ay cause fire or elect ric shock.
• Do not let anyone other than a
service provider disassemble or
collect the product .
• Contact Custom er S ervice cent er for
repair and AS service.
During use, prevent your hands or other
body parts from contacting the Condenser
part at the back of the product as it is hot.
• If you do not do so, it may cause burns or accidents.
Do not turn ON the "Hot" button and the " Cold"
button when there is no water inside the Tank.
• Do not t urn ON the " Hot " butt on and t he " Cold" but t on.
• Check frequent ly if wat er is cut off or the Tap W at er
Supplying Valve is closed, and do not turn ON the
“Cold” and “Hot ” butt ons wit h no wat er inside the Tank.
Turn ON the “C old” and “Hot ” butt ons aft er filling the
Tank w it h wat er up to the Full Wat er Level.
• If the H ot but t on is pressed when the t ank is em pty,
the safet y product will be turned on aut om at ically to
prevent the heater f rom running. This will cause
lukewarm wat er to be extract ed. Please cont act
Cust om er Service C ent er.
Do not put an electric
heating appliance such
as a microwave oven
and an electric oven
toaster or inflammables
such as candlelight, gas
can, and lighter on the product.
When you move the
product, do not pull
the Power Cord or
connecting tube or
hold the Faucet part.
• There is a risk of fire, elect ric shock or accident s.
• If those t hings go int o the
product , it m ay cause a danger
of fire or dam age t o t he product .
Do not put drugs, water
bottle, small metal things,
etc. on the product.
• The hot water is very hot
and it may cause burns.
Thus, avoid touching the
hot water wit h your hands
and be caut ious when
children and t he elderly and the
infirm are using t he product .
Be careful when using
hot water.
Let only the service provider from our Service
Center do the installation and disassembly of
the product.
If water leaks from the
inside of the product
or water is collected
around the product,
close the Tap Water
Supplying Valve, turn
OFF the Power Supply
Button, pull out the Power
Plug, and then contact our
Customer Service Center.
• There is a risk of elect ric shock.
Warning Instruction
Warning Do not
• There is a risk of fire.
If a burning smell or
smoke comes out from
the product, pull out the
Power Plug, close the
Tap Water Supplying
Valve, and contact our
Customer Service Center.
• If you do not do so, it may cause t he perform ance of
the product to be inefficient.
Install the product
where the length of
the Tap Water
Supplying Tube
connected to the
product will be 5m or
shorter from the Tap
Water Supplying Valve.
• It m ay cause colour changes
or discolouration.
• Check the condit ion of the Power
Cord on a f requent basis.
Install the product
avoiding direct sunlight
and high temperature.
Warnings for Safe Use
6
Do not install the
product at a place
t where he temperature
goes down to 0℃ or
lower or outdoors.
• It m ay cause t he Filt er or the
int ernal com ponent s t o freeze,
causing malf unct ion of the product .
When the surrounding temperature goes
down to 0℃ or lower in winter, sometimes
the water inside the Filter and the Tubing
Line may freeze, leading to damage.
Thus, prevent the surrounding temperature
of the place of installation from going
down to 0℃ or lower.
• W hen the surrounding tem perat ure goes dow n to 0℃
or lower and t ap water freezes not to be supplied
norm ally, turn OFF the hot water for saf et y.
Do not install the
product on a bumpy or
inclined surface, liner,
sitting cushion,
or linoleum.
•
I
• This fixed type product should be fixed when you use.
t may cause product malfunction,
unwanted noise or injury.
Please check the condit ion of t he
product on a f requent basis.
Use tap water as the
supplying water,
and install the Tap
water supplying valve
to the “Cold” water pipe.
• Do not use underground water
or any ot her water t han tap wat er.
• The replacem ent cycle of the filt er will vary according
to the region and the am ount of wat er use.
• Connect ing the wat er supply valve t o the hot wat er
pipe may cause dam age t o the filt er or m alfunct ion of
the product .
Installation Issues
• If you do not do so,
it m ay cause electric shock
or fire.
Please avoid the area
where there is high
moisture and dust.
Do not install the product near a bathroom.
Warning Do not
Do not install the
product where gas
may leak or
somewhere near to
an air conditioner or a
heater.
• There is a risk of explosion or fire.

• It m ay cause w at er leak and
m alf unct ion of t he product .
Do not pull out the
Tube from the back of
the product while
using the product.
Cautions for Safe Use
8
Do not use the water of the Water Purifier to
replace water in a fishbowl or aquarium.
If you have not used the External Faucet for a
long time (one day or longer), it may be
polluted. If you reuse the External Faucet, you
can use the purified water after draining water
for about one to two minutes.
• The purif ied w ater m ay not be suitable for t he
environm ent for fish. They m ay die depending on t he
circum st ances.
• It m ay cause a dam age t o
the product .
Do not clean the
product with benzene
and thinner.
• Do not move or shake the
product with the power supply is
ON. It m ay cause t he connect ing
tube to be released, leading to a
malfunction of the product and water leakage.
Do not move the
product while it is
working.
• W hen you drain the water from inside the C old W ater Tank,
about 10.1 L of water will com e out.
• When you drain the water from inside the Hot Water Tank, about
4.0 L of water will com e out. If you drain hot water before
draining cold wat er, about 14 .1 L of water will com e out.
drain the cold water first, and t hen drain the hot water.
If you do not use the
product for a long time,
first completely drain
the water inside the
Tank, fill the Tank with
water, and drain the
water completely again
before use.
• Foreign subst ances m ay go
int o t he product .
Close the Tank Cover
inside the product and
the Top Cover of the
product firmly before
use.
• It m ay reduce t he purificat ion
funct ion or cause bad odour.
Refer to page 25 for t he filt er
replacement cycle.
Replace the Filter at
the replacement cycle.
• If you use any filter other than the genuine CUCKOO filter, it
m ay cause a decrease in wat er purifying perform ance, an
abnorm al taste of wat er, wat er leak, and a malfunct ion of
the product .
Please use only CUCKOO Filter (genuine)
Warning Instruction
Warning Do not
Name of Parts / Components Information
9
www.cuckoo.com.my
Name of Parts
Components Information
User Manual Service Card External Valve (Optional)
< Front > < Back >
Tray
Mood Light
Hot Water Indicater
Energy Save Indicater
Cold Water Indicater
“Energy Save” Button
Water Level Indicater
“Cold” Button
“Hot” Button
Select Lever
Cold Water Faucet
Cold Water Lever
Hot Water Lever
Hot Water Faucet
Child Lock Button
Hot Water Drain

• It m ay cause w at er leak and
m alf unct ion of t he product .
Do not pull out the
Tube from the back of
the product while
using the product.
Cautions for Safe Use
8
Do not use the water of the Water Purifier to
replace water in a fishbowl or aquarium.
If you have not used the External Faucet for a
long time (one day or longer), it may be
polluted. If you reuse the External Faucet, you
can use the purified water after draining water
for about one to two minutes.
• The purif ied w ater m ay not be suitable for t he
environm ent for fish. They m ay die depending on t he
circum st ances.
• It m ay cause a dam age t o
the product .
Do not clean the
product with benzene
and thinner.
• Do not move or shake the
product with the power supply is
ON. It m ay cause t he connect ing
tube to be released, leading to a
malfunction of the product and water leakage.
Do not move the
product while it is
working.
• W hen you drain the water from inside the C old W ater Tank,
about 10.1 L of water will com e out.
• When you drain the water from inside the Hot Water Tank, about
4.0 L of water will com e out. If you drain hot water before
draining cold wat er, about 14 .1 L of water will com e out.
drain the cold water first, and t hen drain the hot water.
If you do not use the
product for a long time,
first completely drain
the water inside the
Tank, fill the Tank with
water, and drain the
water completely again
before use.
• Foreign subst ances m ay go
int o t he product .
Close the Tank Cover
inside the product and
the Top Cover of the
product firmly before
use.
• It m ay reduce t he purificat ion
funct ion or cause bad odour.
Refer to page 25 for t he filt er
replacement cycle.
Replace the Filter at
the replacement cycle.
• If you use any filter other than the genuine CUCKOO filter, it
m ay cause a decrease in wat er purifying perform ance, an
abnorm al taste of wat er, wat er leak, and a malfunct ion of
the product .
Please use only CUCKOO Filter (genuine)
Warning Instruction
Warning Do not
Name of Parts / Components Information
9
www.cuckoo.com.my
Name of Parts
Components Information
User Manual Service Card External Valve (Optional)
< Front > < Back >
Tray
Mood Light
Hot Water Indicater
Energy Save Indicater
Cold Water Indicater
“Energy Save” Button
Water Level Indicater
“Cold” Button
“Hot” Button
Select Lever
Cold Water Faucet
Cold Water Lever
Hot Water Lever
Hot Water Faucet
Child Lock Button
Hot Water Drain

Filtration Circuit / Water Filtration System
10
Step 1
Sediment Filter Removes rust sediments and floating matter
Step 2 Pre-Carbon Block 2.0 Filter Removes residual chlorine and organic matter
Step 3 Natural 2.0 Filter Contains minerals, has an anti-bacterial effect, and
removes smell of gases and organic materials.
Step 4 Nano Positive Filter
Removes general germs, viruses, minute particles,
and some sorts of heavy metal (mercury, iron, aluminum).
Filtration Circuit
Filtration System
※ If CUCKOO Filter (genuine) is not used or used for a prolonged period, it may show reduced performance.
Steps Filter Name Filter Function
External Faucet
(in case the External Valve is installed)
Sediment
Filter
Pre-Carbon
Block 2.0 Filter
Natural 2.0
Filter
Nano Positive
Filter
Sedi
ment
Filter
Pre-
Carbon
Block
2.0
Filter
Natural
2.0
Filter
Nano
Positive
Filter
Step 1 Step 2 Step 3 Step 4
Details to Check before Installation
11
www.cuckoo.com.my
Details to Check before Installation
Avoid direct sunlight and electric
heating appliances.
▶They may cause fire or discolouration of the
product.
1
They may cause fire or discolouration of the product.
▶ Secure the distance from the wall of 20 cm or
longer considering the ease of filter replacement,
and install the product at a place where the length
of the Tap Water Supplying Tube is 5 m or shorter
from the Tap Water Supplying Valve.
Avoid a place with excessive amount of
moisture and dust, and a place where water
spatters directly.
▶They may cause damage to the product.
Avoid a place that is bumpy and
inclined and a place that is not solid.
▶They may cause fire or a damage to the
product.
Avoid a place where the temperature goes down
to 0℃ or lower.
▶ The product is intended to be used indoors.
If you install it in a place where the temperature
goes down to 0
℃ or lower, a malfunction of the
product may occur due to the freezing of the
Filter and the internal mechanism of the product.
Cautions on M oving the Product
▶ Do not incline the product by 45 degrees or more
when you are moving it. Also connect the power
supply in about 30 minutes after moving the product.
Connect to the Cold Water Pipe.
▶ If the product is connected to the Hot Water Pipe,
it may cause a damage to the Filter and a malfunction
of the product.
▶Please refer to How To Install the Product
(page 12) for connecting the Tube.
2
3
4
5
Cautions when installing the Product
Cautions on Moving the Product
Cautions on Connecting the Tube
20cm 20cm

Filtration Circuit / Water Filtration System
10
Step 1
Sediment Filter Removes rust sediments and floating matter
Step 2 Pre-Carbon Block 2.0 Filter Removes residual chlorine and organic matter
Step 3 Natural 2.0 Filter Contains minerals, has an anti-bacterial effect, and
removes smell of gases and organic materials.
Step 4 Nano Positive Filter
Removes general germs, viruses, minute particles,
and some sorts of heavy metal (mercury, iron, aluminum).
Filtration Circuit
Filtration System
※ If CUCKOO Filter (genuine) is not used or used for a prolonged period, it may show reduced performance.
Steps Filter Name Filter Function
External Faucet
(in case the External Valve is installed)
Sediment
Filter
Pre-Carbon
Block 2.0 Filter
Natural 2.0
Filter
Nano Positive
Filter
Sedi
ment
Filter
Pre-
Carbon
Block
2.0
Filter
Natural
2.0
Filter
Nano
Positive
Filter
Step 1 Step 2 Step 3 Step 4
Details to Check before Installation
11
www.cuckoo.com.my
Details to Check before Installation
Avoid direct sunlight and electric
heating appliances.
▶They may cause fire or discolouration of the
product.
1
They may cause fire or discolouration of the product.
▶ Secure the distance from the wall of 20 cm or
longer considering the ease of filter replacement,
and install the product at a place where the length
of the Tap Water Supplying Tube is 5 m or shorter
from the Tap Water Supplying Valve.
Avoid a place with excessive amount of
moisture and dust, and a place where water
spatters directly.
▶They may cause damage to the product.
Avoid a place that is bumpy and
inclined and a place that is not solid.
▶They may cause fire or a damage to the
product.
Avoid a place where the temperature goes down
to 0℃ or lower.
▶ The product is intended to be used indoors.
If you install it in a place where the temperature
goes down to 0
℃ or lower, a malfunction of the
product may occur due to the freezing of the
Filter and the internal mechanism of the product.
Cautions on M oving the Product
▶ Do not incline the product by 45 degrees or more
when you are moving it. Also connect the power
supply in about 30 minutes after moving the product.
Connect to the Cold Water Pipe.
▶ If the product is connected to the Hot Water Pipe,
it may cause a damage to the Filter and a malfunction
of the product.
▶Please refer to How To Install the Product
(page 12) for connecting the Tube.
2
3
4
5
Cautions when installing the Product
Cautions on Moving the Product
Cautions on Connecting the Tube
20cm 20cm

How To Install the Product
12
How To Install the Product
❶ Install the Tap Water Supplying Valve to the Cold Water Pipe.
※Caution
•Install the Tap Water Supplying Valve closed.
•Install it to the cold water pipe. If you install it to the hot water pipe, it may cause malfunction of
the filter and/or the product.
❷Put the Tap Water Supplying Tube in the Tap Water Input at the back of the
product.
※Caution
•Connect to the right position of the Tap Water Input. (Fasten by force to make a clicking sound.
If not, it may cause water leak.)
•Connect the External Tube when installing the External Valve (for separate sale).
❸Open the Tap Water Supplying Valve.
❹ After completely installing it, check if water leaks from the tube connecting part.
•Tap water supplying valve (Tube part)
•Water source input, hot water drain, external outlet
•External valve (External Tube part)
•Filter connecting tubet
❺Put the Power Plug in the Power Outlet.
❷
External Outlet(Orange)
Tap Water(Blue)
❶
Closed
❸
Open
Cold
Water
Tap Water
Supplying Valve
Cold Water Pipe
External Valve
(for sale)
External Outlet
Tap Water Input
❺
Details to Check before Use
13
www.cuckoo.com.my
Details to Check before Use
▶This product is exclusively for 220V-240V 50Hz.
Connect to the exclusive Power Outlet.
▶
Check if water is cut off, and then apply the power supply.
▶Before connecting the power supply, check if the
"Cold" and "Hot" buttons are OFF.
Connect the power supply.
▶First, open the Tap Water Valve and check if the
water is cut off. Then, open the Tap Water
Supplying Valve.
2
Open the Tap Water Supplying Valve.
▶ When you want to use hot/cold water, press the hot/cold
water button for 3 seconds respectively.
The corresponding lamp lights would emit different colours.
(Hot water display lamp: red, cold water display lamp: blue)
▶If you do not press the button, purified water
will be supplied.
Press the " Hot" and " Cold" buttons to turn them on.
If you have not used the product for a long
tim e or have recently installed the product
drain the w ater.
fill the t ank w ith purified water, and then
drain the w ater once or m ore before use.
Open
Do not turn ON the "Cold" and "Hot" buttons when there is no water inside the tank.
(It may cause a malfunction of the product).
•Fill the Tank with water up to the Full Water Level, and then turn on the "Cold" and "Hot" buttons.
•If you have pressed the power supply button with no water inside the Tank, the safety device will
work for safety, and lukewarm water will come out as the Heater will not be heated. Then, please
contact our Customer Service Center.
•Check frequently if water is cut off or the Tap Water Supplying Valve is closed, and do not turn on
the "Cold" and "Hot" buttons with no water inside the Tank.
Caution
1
4
3

How To Install the Product
12
How To Install the Product
❶ Install the Tap Water Supplying Valve to the Cold Water Pipe.
※Caution
•Install the Tap Water Supplying Valve closed.
•Install it to the cold water pipe. If you install it to the hot water pipe, it may cause malfunction of
the filter and/or the product.
❷Put the Tap Water Supplying Tube in the Tap Water Input at the back of the
product.
※Caution
•Connect to the right position of the Tap Water Input. (Fasten by force to make a clicking sound.
If not, it may cause water leak.)
•Connect the External Tube when installing the External Valve (for separate sale).
❸Open the Tap Water Supplying Valve.
❹ After completely installing it, check if water leaks from the tube connecting part.
•Tap water supplying valve (Tube part)
•Water source input, hot water drain, external outlet
•External valve (External Tube part)
•Filter connecting tubet
❺Put the Power Plug in the Power Outlet.
❷
External Outlet(Orange)
Tap Water(Blue)
❶
Closed
❸
Open
Cold
Water
Tap Water
Supplying Valve
Cold Water Pipe
External Valve
(for sale)
External Outlet
Tap Water Input
❺
Details to Check before Use
13
www.cuckoo.com.my
Details to Check before Use
▶This product is exclusively for 220V-240V 50Hz.
Connect to the exclusive Power Outlet.
▶
Check if water is cut off, and then apply the power supply.
▶Before connecting the power supply, check if the
"Cold" and "Hot" buttons are OFF.
Connect the power supply.
▶First, open the Tap Water Valve and check if the
water is cut off. Then, open the Tap Water
Supplying Valve.
2
Open the Tap Water Supplying Valve.
▶ When you want to use hot/cold water, press the hot/cold
water button for 3 seconds respectively.
The corresponding lamp lights would emit different colours.
(Hot water display lamp: red, cold water display lamp: blue)
▶If you do not press the button, purified water
will be supplied.
Press the " Hot" and " Cold" buttons to turn them on.
If you have not used the product for a long
tim e or have recently installed the product
drain the w ater.
fill the t ank w ith purified water, and then
drain the w ater once or m ore before use.
Open
Do not turn ON the "Cold" and "Hot" buttons when there is no water inside the tank.
(It may cause a malfunction of the product).
•Fill the Tank with water up to the Full Water Level, and then turn on the "Cold" and "Hot" buttons.
•If you have pressed the power supply button with no water inside the Tank, the safety device will
work for safety, and lukewarm water will come out as the Heater will not be heated. Then, please
contact our Customer Service Center.
•Check frequently if water is cut off or the Tap Water Supplying Valve is closed, and do not turn on
the "Cold" and "Hot" buttons with no water inside the Tank.
Caution
1
4
3

Details to Check before Use/How To Use
14
Details to Check before Use
Em pty the Tray on a regular
basis.
▶In order to drink clean water frequently,
you need to replace and clean the
Filter on a regular basis.
▶Refer to page 25 for the filter
replacement cycle.
Replace and manage the Filter
on a regular basis.
▶Check if water is cut off and if the Tap Water
Supplying Valve is open before turning on the
"Hot" button.
How To Use Hot Water
Press the “Hot” button for about 3 seconds to turn it
on. The product needs time to run the Heater, which
is about 30 minutes.(The red lamp will be turned on)
L ig h t ly pu sh th e H o t W a ter L ev er, an d th en
p res s th e C hild L o c k B u t to n.
Lift the Hot Water Lever to 90 degrees and press the
Child Lock Button, then you can get hot water nonstop.
Do not push the Hot Water Lever while pressing the Child Lock
Button. It may cause hot water to spatter, leading to burns.
When returning the Lever to normal after nonstop flow, return the
Lever slowly. (If you rapidly return the Lever, the water may spatter, causing you burns.)
The first cup of water may feel lukewarm. This is because the purified water inside the waterway
is supplied together. The second cup of water onward will be of the normal temperature.
5
6
3
If you do not want to use hot water, while the hot water operation is activated,
press the “Hot” button for about 3 seconds to stop hot water generation.
▶ The hot water LED turns off.
2
1
How to Use
▶ Check if water is cut off and if the Tap Water Supplying
Valve is open before turning ON the "Cold" button.
Press the “Cold” button for about 3 seconds to turn it on.
The product needs time to run the Heater, which will
take about 60 minutes.(The blue lamp will be turned on)
Turn the temperature dial towards the
Cold Water.
If you lift the Cold W ater Lever to 90
degrees, you can get cold w ater nonstop.
How to Use Cold Water
The first cup of water may feel lukewarm. This is because the purified water inside the waterway
is supplied together. The second cup of water onwards will be of normal temperature.
1
▶ The cold water LED turns off.
If you do not want to use cold water, while the cold water operation is activated, press
the “Cold” button for about 3 seconds to stop cold water generation.
2
4
How to Use Purified Water
Turn the temperature dial towards the room
water.
1
Lightly push the cold Water Lever.
2
If you lift the Cold Water Lever to 90
degrees, you can get cold water nonstop.
3
Lightly push the Cold W ater Lever.
3
15
www.cuckoo.com.my

Details to Check before Use/How To Use
14
Details to Check before Use
Em pty the Tray on a regular
basis.
▶In order to drink clean water frequently,
you need to replace and clean the
Filter on a regular basis.
▶Refer to page 25 for the filter
replacement cycle.
Replace and manage the Filter
on a regular basis.
▶Check if water is cut off and if the Tap Water
Supplying Valve is open before turning on the
"Hot" button.
How To Use Hot Water
Press the “Hot” button for about 3 seconds to turn it
on. The product needs time to run the Heater, which
is about 30 minutes.(The red lamp will be turned on)
L ig h t ly pu sh th e H o t W a ter L ev er, an d th en
p res s th e C hild L o c k B u t to n.
Lift the Hot Water Lever to 90 degrees and press the
Child Lock Button, then you can get hot water nonstop.
Do not push the Hot Water Lever while pressing the Child Lock
Button. It may cause hot water to spatter, leading to burns.
When returning the Lever to normal after nonstop flow, return the
Lever slowly. (If you rapidly return the Lever, the water may spatter, causing you burns.)
The first cup of water may feel lukewarm. This is because the purified water inside the waterway
is supplied together. The second cup of water onward will be of the normal temperature.
5
6
3
If you do not want to use hot water, while the hot water operation is activated,
press the “Hot” button for about 3 seconds to stop hot water generation.
▶ The hot water LED turns off.
2
1
How to Use
▶ Check if water is cut off and if the Tap Water Supplying
Valve is open before turning ON the "Cold" button.
Press the “Cold” button for about 3 seconds to turn it on.
The product needs time to run the Heater, which will
take about 60 minutes.(The blue lamp will be turned on)
Turn the temperature dial towards the
Cold Water.
If you lift the Cold W ater Lever to 90
degrees, you can get cold w ater nonstop.
How to Use Cold Water
The first cup of water may feel lukewarm. This is because the purified water inside the waterway
is supplied together. The second cup of water onwards will be of normal temperature.
1
▶ The cold water LED turns off.
If you do not want to use cold water, while the cold water operation is activated, press
the “Cold” button for about 3 seconds to stop cold water generation.
2
4
How to Use Purified Water
Turn the temperature dial towards the room
water.
1
Lightly push the cold Water Lever.
2
If you lift the Cold Water Lever to 90
degrees, you can get cold water nonstop.
3
Lightly push the Cold W ater Lever.
3
15
www.cuckoo.com.my

[Mood Lamp] On/Off Set-up Method
▶When press [Hot] button, [Mood Lamp] On/Off Set-up changed (Initial Setting : Light)
※If there is no operation for 7 seconds, it returns to standby mode without saving
settings.
▶When press [Energy Save] button, will be saved.
※Setting Turn On : Level indicator lamp On and [Mood lamp] On
Setting Turn off : Level indicator lamp Flickering and [Mood lamp] Off
Press the [Hot] button and the [Energy Save] button simultaneously for
2 seconds in the standby mode.
1
▶The [Energy Save] indicator lights up,
and after 1 second all the indicators are dimmed.
▶The power saving function turns off all indicator lights except the [Energy Save]
when the light sensor detects darkness for a certain period of time.
※[Mood Lamp] On / Off is irrelevant to [Energy Save] function.
※Please refer to the following [Mood Lamp] on/off set-up method.
▶When the power saving function is activated, the indicator lights up when the
button is pressed. (If there is no button input for a certain period of time,
the indicator becomes dark again.) .
While the [Energy Save] indicator is off,
press the [Energy Save] button.
1
▶The [Energy Save] indicator turns off and all indicator lights are turned on.
When the [Energy Save] light is on, pressing the [Energy Save] button turns off
the power function.
2
How to Use
16
How to Use Energy Save Function
This function saves energy by reducing the standby power and the brightness of the indicator.
It is a method to set the function to light the mood lamp when detecting darkness.
Press for 2 seconds Level indicator lamp
and [Mood lamp] On
Level indicator lamp Flickering
and [Mood lamp] Off
<Set up Method> <Setting Turn On> <Setting Turn Off>
How to Clean the Cold Water Tank
17
www.cuckoo.com.my
Setting the temperature
▶ Enter the hot and cold water temperature setting mode. [Initial Setting : Level 3]
▶ Press the hot water button to set the temperature. [The higher Level means the higher temperature]
▶Press the [Energy Save] button to save the setting.
※
If there is no operation for 7 seconds, it returns to standby mode without saving settings.
Setting the temperature of hot water:Press the [Energy Save] button for 3 seconds.
1
How To Use External Faucet (Optional)
▶
※
If you rub the external valve with a brush or sponge, it may damage the plating of the
valve’s outer surface and may cause the mineral scale to the inside of the external valve.
Move the Lever of the External Valve connected to the
skin down, and then you can use the External Faucet.
Closed
Open
If you have not used the External Faucet for a long time of one day or longer, it may be polluted.
When you reuse the External Faucet, you can use purified water after draining water for about
one to two minutes.
1
How to Use
Press for 3 seconds
<Set up Method> <Initial Setting Check>
If you have not used the External Faucet for a long time
with the power connected, the water of the External Valve
may be warm because of the inside heat caused by the
operation of the Heater and the Compressor.
▶ Enter the hot and cold water temperature setting mode. [Initial Setting : Level 3]
▶ Press the cold water button to set the temperature. [The higher Level means the lower temperature]
▶Press the [Energy Save] button to save the setting.
※
If there is no operation for 7 seconds, it returns to standby mode without saving settings.
Setting the temperature of Cod water : Press the [Energy Save] button for 3 seconds.
2
Press for 3 seconds
<Set up Method> <Initial Setting Check>

[Mood Lamp] On/Off Set-up Method
▶When press [Hot] button, [Mood Lamp] On/Off Set-up changed (Initial Setting : Light)
※If there is no operation for 7 seconds, it returns to standby mode without saving
settings.
▶When press [Energy Save] button, will be saved.
※Setting Turn On : Level indicator lamp On and [Mood lamp] On
Setting Turn off : Level indicator lamp Flickering and [Mood lamp] Off
Press the [Hot] button and the [Energy Save] button simultaneously for
2 seconds in the standby mode.
1
▶The [Energy Save] indicator lights up,
and after 1 second all the indicators are dimmed.
▶The power saving function turns off all indicator lights except the [Energy Save]
when the light sensor detects darkness for a certain period of time.
※[Mood Lamp] On / Off is irrelevant to [Energy Save] function.
※Please refer to the following [Mood Lamp] on/off set-up method.
▶When the power saving function is activated, the indicator lights up when the
button is pressed. (If there is no button input for a certain period of time,
the indicator becomes dark again.) .
While the [Energy Save] indicator is off,
press the [Energy Save] button.
1
▶The [Energy Save] indicator turns off and all indicator lights are turned on.
When the [Energy Save] light is on, pressing the [Energy Save] button turns off
the power function.
2
How to Use
16
How to Use Energy Save Function
This function saves energy by reducing the standby power and the brightness of the indicator.
It is a method to set the function to light the mood lamp when detecting darkness.
Press for 2 seconds Level indicator lamp
and [Mood lamp] On
Level indicator lamp Flickering
and [Mood lamp] Off
<Set up Method> <Setting Turn On> <Setting Turn Off>
How to Clean the Cold Water Tank
17
www.cuckoo.com.my
Setting the temperature
▶ Enter the hot and cold water temperature setting mode. [Initial Setting : Level 3]
▶ Press the hot water button to set the temperature. [The higher Level means the higher temperature]
▶Press the [Energy Save] button to save the setting.
※
If there is no operation for 7 seconds, it returns to standby mode without saving settings.
Setting the temperature of hot water:Press the [Energy Save] button for 3 seconds.
1
How To Use External Faucet (Optional)
▶
※
If you rub the external valve with a brush or sponge, it may damage the plating of the
valve’s outer surface and may cause the mineral scale to the inside of the external valve.
Move the Lever of the External Valve connected to the
skin down, and then you can use the External Faucet.
Closed
Open
If you have not used the External Faucet for a long time of one day or longer, it may be polluted.
When you reuse the External Faucet, you can use purified water after draining water for about
one to two minutes.
1
How to Use
Press for 3 seconds
<Set up Method> <Initial Setting Check>
If you have not used the External Faucet for a long time
with the power connected, the water of the External Valve
may be warm because of the inside heat caused by the
operation of the Heater and the Compressor.
▶ Enter the hot and cold water temperature setting mode. [Initial Setting : Level 3]
▶ Press the cold water button to set the temperature. [The higher Level means the lower temperature]
▶Press the [Energy Save] button to save the setting.
※
If there is no operation for 7 seconds, it returns to standby mode without saving settings.
Setting the temperature of Cod water : Press the [Energy Save] button for 3 seconds.
2
Press for 3 seconds
<Set up Method> <Initial Setting Check>

18
How to Clean the Cold Water Tank
How to Clean the Cold Water Tank
First, close the Tap Water Supplying Valve.
Turn OFF the "Cold" and "Hot" buttons.
Pull out the Power Plug for safety.
▶P
▶With the "hot" and "cold" lights on, Press the
"hot" and "cold" buttons for 3 seconds.
▶Make sure that the "hot" and "cold" lights are
turned off.
ut the water in a clean bucket as it will be used for
cleaning the Tank.
▶About 10.1L of water will come out, so prepare a
bucket of a sufficient size.
Completely drain the water inside the Cold
Water Tank through the Cold Water Faucet.
▶Beware as the hot water is very hot.
▶About 4.0 L of water will come out, so prepare a
bucket of sufficient size.
▶
If you drain hot water before draining cold water, about
11.6 L of water will come out. Drain cold water before
draining hot water. (After hot water is completely drained,
close the stopper of the Hot Water Drain.)
Connect the Hot Water Drain Tube to the Hot Water
Faucet and the Hot Water Drain, and completely
drain the water from inside the Hot Water Tank.
Closed
3
5
4
2
1
19
www.cuckoo.com.my
How to Clean the Cold Water Tank
How to Clean the Cold Water Tank
▶You need a Phillips screwdriver.
Separate the Top Cover of the product.
▶The top part of the Cold Water Tank is a little
lukewarm as purified water and hot water steam
meet there.
Separate the Cover of the Cold Water Tank.
▶Wear sanitary gloves for cleanliness when you
separate the Separator and clean the inside of the
Tank.
Turn the Separator to separate it from the Cold
Water Tank.
▶Avoid leaving foreign substances inside the Tank.
Wipe out the inside of the Tank with a clean, soft cloth.
▶Completely drain the water used for rinsing
through the Cold Water Faucet.
▶Open the stopper of the Hot Water Drain,
completely drain the water that flowed into the Hot
Water Tank, and close the stopper of the Hot
Water Drain.
Put the w ater collected at above No. 4 in the
Tank to rinse the Tank.
Fur mayform insidethe Tank because of mineralsmelted inwater.
Thus, incase youdonot often use the Water Purifier, drainthe water
throughthe Cold Water Faucetand the HotWaterFaucet once
every two to threedays,and then youcan preventfur from forming.
(Youhad better use thepurifiedwaterassoon as possible.)
6
7
8
9
10

18
How to Clean the Cold Water Tank
How to Clean the Cold Water Tank
First, close the Tap Water Supplying Valve.
Turn OFF the "Cold" and "Hot" buttons.
Pull out the Power Plug for safety.
▶P
▶With the "hot" and "cold" lights on, Press the
"hot" and "cold" buttons for 3 seconds.
▶Make sure that the "hot" and "cold" lights are
turned off.
ut the water in a clean bucket as it will be used for
cleaning the Tank.
▶About 10.1L of water will come out, so prepare a
bucket of a sufficient size.
Completely drain the water inside the Cold
Water Tank through the Cold Water Faucet.
▶Beware as the hot water is very hot.
▶About 4.0 L of water will come out, so prepare a
bucket of sufficient size.
▶
If you drain hot water before draining cold water, about
11.6 L of water will come out. Drain cold water before
draining hot water. (After hot water is completely drained,
close the stopper of the Hot Water Drain.)
Connect the Hot Water Drain Tube to the Hot Water
Faucet and the Hot Water Drain, and completely
drain the water from inside the Hot Water Tank.
Closed
3
5
4
2
1
19
www.cuckoo.com.my
How to Clean the Cold Water Tank
How to Clean the Cold Water Tank
▶You need a Phillips screwdriver.
Separate the Top Cover of the product.
▶The top part of the Cold Water Tank is a little
lukewarm as purified water and hot water steam
meet there.
Separate the Cover of the Cold Water Tank.
▶Wear sanitary gloves for cleanliness when you
separate the Separator and clean the inside of the
Tank.
Turn the Separator to separate it from the Cold
Water Tank.
▶Avoid leaving foreign substances inside the Tank.
Wipe out the inside of the Tank with a clean, soft cloth.
▶Completely drain the water used for rinsing
through the Cold Water Faucet.
▶Open the stopper of the Hot Water Drain,
completely drain the water that flowed into the Hot
Water Tank, and close the stopper of the Hot
Water Drain.
Put the w ater collected at above No. 4 in the
Tank to rinse the Tank.
Fur mayform insidethe Tank because of mineralsmelted inwater.
Thus, incase youdonot often use the Water Purifier, drainthe water
throughthe Cold Water Faucetand the HotWaterFaucet once
every two to threedays,and then youcan preventfur from forming.
(Youhad better use thepurifiedwaterassoon as possible.)
6
7
8
9
10

20
How to Clean the Cold Water Tank
How to Clean the Cold Water Tank
▶ Turn it preventt the Separatoo r from breaking away.
Reassem ble the Separator to the Cold W ater Tank.
▶Close the Cover of the Cold Water Tank completely.
If not, insects or foreign substances may
go into the Tank.
Mount the Cover of the Cold Water Tank.
▶Fasten the screw with a Phillips screwdriver.
Close the Top Cover, fasten the screw, open the Tap Water Supplying
Valve, and put in the Power Plug.
▶Check thatwater comes out through the Hot Water Faucet, and then turn on the
"Hot" button.
※Clean the Tank on a regular basis to drink clean and healthy water always.
Check that that water comes out through the Cold Water Faucet and the Hot
Water Faucet, and press the "Cold" and "Hot" buttons to turn them on.
Open
If the Separator is notfixedand breaks away,the drivingtime
of the Compressor will getlonger and cause noise. Accurately
put theSeparator in.
11
12
14
13
21
www.cuckoo.com.my
How to Clean Tray
How to Clean Tray
▶Hold the Tray, lift it upward, and separate the Tray.
Separation of Tray
▶Separate the Tray, hold and lift the hole of the Grill
at the top of the Tray, and separate the Tray Grill.
Separation of Tray Grill
▶Discard the collected water, and
remove the remaining moisture with
soft cloth, etc.
Cleaning of Tray
▶ Finish the cleaning of Tray and reassemble it in the reverse order of the disassembly
procedure.
Assembly of Tray
1
2
3
4