Cudy FS1016D User manual

Quick Installation Guide
Model: FS1016D
For support and warranty, please visit: http://www.cudy.com/.
Specifications are subject to change without notice. Cudy is a
registered trademark of Shenzhen Cudy Technologies Co., Ltd.
Other brands and product names are trademarks or registered
trademarks of their respective holders.Copyright©2022 Shenzhen
Cudy Technology Co., Ltd. All rights reserved.
EU declaration of conformity
Cudy hereby declares that the device is in compliance with the
essential requirements and other relevant provisions of directives
2014/30/EU, 2014/35/EU, 2009/125/EC and 2011/65/EU.The
original EU declaration of conformity may be found at
http://www.cudy.com/en/ce
810600151
Main Features
3
CE Mark Warning
This is a class B product. In a domestic environment, this product
may cause radio interference, in which case the user may be
required to take adequate measures.
Email:
[e-mail]
Website:
www.cudy.com
FS1016D
IEEE 802.3, IEEE 802.3u, IEEE 802.3x
16 10/100Mbps RJ45 Ports
Store-and-Forward
Output: 5VDC/1A
138*103*35 mm
0.228kg
Yes
3.2Gbps
148,800 ppsfor 100M
14,880 pps for 10M
8K
0°C~40°C(32°F~104°F)
40eC*70°C(-40eF-158°F)
10%~90%RH non-condensing
5%~90%RH non-condensing
Model
Standards and Protocols
Interface
Forwarding Mode
Power Supply
Dimensions
Weight
Fanless
Switching Capacity
Packet Filtering
Forwarding Rate
MAC Address Table
Operating Temperature
Storage Temperature
Operating Humidity
Storage Humidity

LED Indication
2
Physical Connection
1
说明书尺寸要求：210*77mm 105g铜版纸过水性光油 双面双色印刷 折法：内三折
Router
FS1016D
PC
WAN Port LAN Port
Wi-Fi Printer
Power Cord
Internet
2 4 6 8 10 12 14 16
1 3 5 7 9 10 11 12
Power
LED Indicator status Description
ON
OFF
ON
Blink
OFF
Power/PWR
LINK/ACT
(Port 1-16)
The indicator light is always on,the device
is working normally or is powered on
The indicator light is off,the device is
not started or is not powered on
Corresponding LINK/ACT port is not
connected normally,no data passes
Corresponding to the normal connection
of the LINK/ACT port,there is data passing
Corresponding LINK/ACT port no
connection or connection failure