Cudy POE500 User manual

PORT
DATA&POWEP
OUT
DATA
IN
Physical Appearance
2
Specifications
3
Hardware Connection
1
Model
Power
Ethernet
Network protocol
PoE protocol
POE150 / POE500
AC 100-240 V
POE150: 10/100/1000M
POE500: 10/100/1000M/2.5Gbps
IEEE802.3 (10Base-T)
IEEE802.3u (100Base-TX)
IEEE802.3ab (1000Base-TX)
IEEE802.3bz (2.5GBase-T)
IEEE802.3x (Flow control)
IEEE802.3af (15.4 W)
IEEE802.3at (25.4 W)
Industry Standard
Network Medium
Working Temperature
Storage Temperature
EMI: FCC Part 15 CISPR (EN55032) class A
EMS: EN61000-4-2 (ESD)、EN61000-4-4 (EFT)
Shock: IEC 60068-2-27
Free Fall: IEC 60068-2-32
Vibration: IEC 60068-2-6
10Base-T : Cat3、4、5 or above UTP(≤100m)
100Base-TX : Cat5 or above UTP(≤100m)
1000Base-TX : Cat5 or above UTP(≤100m)
0~40°C
-40~80°C
Power Socket
Ethernet Device
(switch, router, etc.)
1 2 3 4 5
Wireless AP Smart VoIP
IP Camera
Powered Device (PD)
AC Socket

Quick Installation Guide
Model: POE150/POE500
810600092
Email: [e-mail]
Green
PORT
Red
LED and Interface Explanation
4
PoE injector got 100-240V power input
The terminal equipment connected to
DATA&POWEP OUT port is powered
For support and warranty, please visit: http://www.cudy.com/. Specifications are subject to change
without notice. Cudy is a registered trademark of Shenzhen Cudy Technologies Co., Ltd. Other
brands and product names are trademarks or registered trademarks of their respective
holders.Copyright©2021 Shenzhen Cudy Technology Co., Ltd. All rights reserved.
EU Address: Otto esser 2c, 65451 Kelsterbach, Germany
EU declaration of conformity
Cudy hereby declares that the device is in compliance with the essential requirements and other
relevant provisions of directives 2014/30/EU, 2014/35/EU, 2009/125/EC and 2011/65/EU.The
original EU declaration of conformity may be found at http://www.cudy.com/
CE Mark Warning
This is a class B product. In a domestic environment, this product may cause radio interference, in
which case the user may be required to take adequate measures.
Email:
[e-mail]
Website:
www.cudy.com
AC Socket
DATA IN
DATA OUT
Connect with AC cable
Connect to the Ethernet device with cable to transmit data.
Connect to the PD device with UTP cable to supply power.