Cudy GS1008PT User manual

Physical Appearance2
Specifications
3
Hardware Connection
1
Network protocol
PoE Protocol
Industry Standard
Network Medium
Model
Power
Ethernet
Switching Capacity
Throughput
Packet Buffer
MAC Address
Jumbo Frame
Transfer Mode
MTBF
Working Temperature
Storage Temperature
GS1008PT
Power Socket
Ethernet Device
(switch, router, etc.) Wireless AP Smart VoIP
IP Camera
Powered Device (PD)
Internet
Front board
Ethernet PoE Port
Input: AC 100-240V, 50/60Hz
8 *10/100/1000M PoE Port
16Gbps
11.9Mpps
1.5Mb
2K
9216bytes
Store and forward
100000 hour
0~40°C
-40~85°C
Router
IEEE802.3 (10Base-T) / IEEE802.3u (100Base-TX)
IEEE802.3ab(1000Base-TX) / IEEE802.3x (Flow control)
IEEE802.3af （15.4W）IEEE802.3at （30W）
IEEE802.3bt （60W）
EMI: FCC Part 15 CISPR (EN55032) class A
EMS: EN61000-4-2 (ESD),EN61000-4-4 (EFT),EN61000-4-5 (Surge)
Shock: IEC 60068-2-27 / Free Fall: IEC 60068-2-32
Vibration: IEC 60068-2-6
10Base-T : Cat3、4、5 or above UTP(≤100m)
100Base-TX : Cat5 or above UTP(≤100m)
1000Base-TX : Cat5 or above UTP(≤100m)
8 10/100/1000Mbps PoE Ports
120 Watts total PoE budget
60 Watts maximum for port #1~#2 (802.3bt/at/af)
30 Watts maximum for port #3~#8 (802.3at/af)
VLAN mode support for port #1~#6
Extend mode support for port #3~#6

Quick Installation Guide
Model: GS1008PT
EU declaration of conformity
Cudy hereby declares that the device is in compliance with the essential requirements and other
relevant provisions of directives 2014/30/EU, 2014/35/EU, 2009/125/EC and 2011/65/EU.The
original EU declaration of conformity may be found at http://www.cudy.com/
810600091
Email: [e-mail]
www.cudy.com
LED and Interface Explanation
5
PWR
Mode
Link ACT
Power LED
Mode LED
Link LED
ON
OFF
ON
OFF
Flashing
ON
OFF
Flashing
Power on
Power off
Port Isolation
Standard switching
Link extension
Link connected
Link disconnected
Link data transmitted
DIP Explanation
4
VLAN
(1-6 Ports)
Default
Extend
(3-6 Ports)
Port Isolation
Standard Switch
Link Extension
Downlink designated ports are isolated
from each other, only transmit data with
the uplink port.
All ports communicate freely
The specified port speed drops to 10Mbps/s,
max PoE transmission is 250 meters.