Curtis D60GT12 Series User manual

G3 D60 Series Thermal Decanter
Coffee Brewing System
USER GUIDE
READ AND SAVE THESE INSTRUCTIONS
NOTICE TO INSTALLER: Please leave this booklet with the machine.
'$%'30/5$07&3øøøøø #
F-10030 revA

CONTENTS CL31
.H\)HDWXUHV6SHFLÀFDWLRQV6\VWHP5HTXLUHPHQWV..............................................................................................FS31
,PSRUWDQW6DIHJXDUGV............................................................................................................................................... IS2
,QVWDOODWLRQ,QVWUXFWLRQV*HQHUDO...............................................................................................................................II2
,QVWDOODWLRQ,QVWUXFWLRQV/HYHOLQJ:DWHU6XSSO\(OHFWULFDO....................................................................................II17
2SHUDWLQJ,QVWUXFWLRQV ............................................................................................................................................OI24
&OHDQLQJ,QVWUXFWLRQV%UHZHUV ...............................................................................................................................CI1
&OHDQLQJ,QVWUXFWLRQV7KHUPDO'LVSHQVHUV ............................................................................................................CI9
3URJUDPPLQJ*XLGH ............................................................................................................................................... 3*
5RXJK,Q'UDZLQJ................................................................................................................................................. 5'
,OOXVWUDWHG3DUWV5HFRPPHQGHG3DUWV.................................................................................................................... IP56
,OOXVWUDWHG3DUWV5HFRPPHQGHG3DUWV7DQN$VVHPEO\9ROW......................................................................... IP57
,OOXVWUDWHG3DUWV5HFRPPHQGHG3DUWV7DQN$VVHPEO\'XDO9ROWDJH ................................................................. IP58
,OOXVWUDWHG3DUWV5HFRPPHQGHG3DUWV7DQN$VVHPEO\([SRUW ........................................................................... IP59
(OHFWULFDO6FKHPDWLF9ROW..............................................................................................................................ES58
(OHFWULFDO6FKHPDWLF'XDO9ROWDJH ......................................................................................................................ES59
(OHFWULFDO6FKHPDWLF([SRUW ................................................................................................................................(6
7URXEOHVKRRWLQJ*XLGH*HQHUDO............................................................................................................................7*
7URXEOHVKRRWLQJ*XLGH7ULDF&LUFXLW....................................................................................................................7*
(UURU&RGHV .............................................................................................................................................................EC4
3URGXFW:DUUDQW\....................................................................................................................................................3:
Contact Information
Wilbur Curtis Co., Inc.
6913 Acco Street | Montebello, CA 90640 US
Phone: [phone] | Toll Free: 800-421-6150
Email: [email protected] | Web: www.wilburcurtis.com
'PSUIFMBUFTUTQFDJmDBUJPOTBOEJOGPSNBUJPOHPUPXXXXJMCVSDVSUJTDPN
5PMM'SFF].POEBZ'SJEBZA.M.- 4:00 P.M.PT
Email: [email protected]
%VFUPDPOUJOVFEQSPEVDUJNQSPWFNFOUUIFQSPEVDUTJMMVTUSBUFEQIPUPHSBQIFEJOUIJTHVJEFNBZWBSZTMJHIUMZGSPNUIFBDUVBMQSPEVDU
%$0/5&/54-*45øø  "

KEY FEATURES/SPECIFICATIONS/SYSTEM REQUIREMENTS FS31
Key Features
• Easy-to-Use — Simple graphic design with color-coded buttons for all operating functions.
• Saves Operating Costs — Energy save mode automatically reduces energy consumption when brewer is idle.
• Reduces Downtime — G3 on-board self-diagnostics continually sense proper brewing operation. A service
phone number and error code will be displayed in the rare event technical assistance is required.
• Programmable Display Banner — Can be set to display your operation’s name and message.
• Quick and Simple Installation
• Digital Control Module - Provides precise control over all aspects of brewing time, temperature, volume, pre-
infusion, pulse-brewing and water bypass.
• Industry’s most effective mineral tolerant design.
6SHFLÀFDWLRQV6HOHFWHG0RGHOV
(OHFWULFDO6XSSO\5HTXLUHPHQWV
02'(/ '(6&5,37,21 3+$6( 92/76 $036 +($7,1*&21),* :,5( :$776 +(57= &$3$&,7<
'*7[ Thermal decanter brewer,
120 Volt 1 PH 120 V 12.5 A 1 x 1450 W 2W + G 1500 W 50/60 Hz 4.0 gal./hr. [15.1 L/hr.]
'*7[ Thermal decanter brewer,
dual voltage 1 PH 120/220 V 13.6/12.0 A 2 x 1450 W 2W/3W + G 1500/3300 W 50/60 Hz 4.0/9.0 gal./hr. [15.1/34.1 L/hr.]
'*7[ Thermal decanter brewer,
220-240 Volt 1 PH 230 V 11.8 A 1 x 2500 W 2W + G 2723 W 50/60 Hz 7.0 gal./hr. [26.5 L/hr.]
'LPHQVLRQV :DWHU6XSSO\5HTXLUHPHQWV
02'(/ +(,*+7 :,'7+ '(37+ 6+,3:(,*+7 6+,3&8%( :$7(5&211(&725 :$7(535(6685( 0,1)/2:5$7(
'*7[ 17.75”
[45.1 cm]
9.11”
[23.1 cm]
20.38”
[51.8 cm]
29.0 lb.
[13.2 kg]
3.92 cu. ft.
[0.11 m3]µÁDUH
20 - 90 psi
[138 - 620 kPa]
1.0 gpm
[3.8 Lpm]
'*7[ 17.75”
[45.1 cm]
9.11”
[23.1 cm]
20.38”
[51.8 cm]
30.0 lb.
[13.6 kg]
3.92 cu. ft.
[0.11 m3]µÁDUH
20 - 90 psi
[138 - 620 kPa]
1.0 gpm
[3.8 Lpm]
'*7[ 17.75”
[45.1 cm]
9.11”
[23.1 cm]
20.38”
[51.8 cm]
29.0 lb.
[13.2 kg]
3.92 cu. ft.
[0.11 m3]µÁDUH
20 - 90 psi
[138 - 620 kPa]
1.0 gpm
[3.8 Lpm]
D60 KEY FEATURES/SPECS/SYSTEM REQUIREMENTS 080620C
Following are the factory default settings for the D60 brewer:
• Energy Save Mode = Off• Brew Temperature = 200°F (92°C)
• Brew Volume = 60 oz. (1.8 L)

IMPORTANT SAFEGUARDS IS2
Symbols
This is the safety alert symbol. It is used to alert you to potential physical injury hazards. Obey all safety
messages that follow this symbol to avoid possible injury or death.
DANGER - Indicates a hazardous situation which, if not avoided, will result in death or serious injury.
WARNING - Indicates a hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION - Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
NOTICE - Indicates a situation which, if not avoided, could result in property damage.
IMPORTANT - Provides information and tips for proper operation.
SANITATION REQUIREMENTS
Important Safeguards/Conventions
WARNING:
• Make sure that this appliance is installed and grounded according to the INSTALLATION
INSTRUCTIONS by qualimed personnel before attempting to use it. Failure to follow the INSTALLATION
INSTRUCTIONS could result in personal injury or void the warranty.
• This appliance is designed for commercial use. Any service other than cleaning and preventive
maintenance should be performed by an authorized Wilbur Curtis service technician.
• To reduce the risk of mre or electric shock, DO NOT open the service panels. There are no user
serviceable parts inside.
• Keep hands, arms and other items away from hot surfaces of the unit during operation.
• Clean the appliance and any dispensers completely before using them for the mrst time according to
the CLEANING INSTRUCTIONS. Clean them regularly as instructed in the CLEANING INSTRUCTIONS.
• Use this appliance only for its intended use, brewing/dispensing hot and/or cold beverages/water.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory
or mental capabilities or lack of experience and knowledge, unless they have been given supervision
or instruction concerning use of the appliance by a person responsible for their safety. Children should
be supervised to ensure that they do not play with the appliance.
• Avoid spillage onto the power (mains) connector.
COFFEE/TEA BREWERS, IMPORTANT SAFEGUARDS/SYMBOLS 121622J
WARNING - This product can expose you to chemicals including Acrylamide and Bisphenol A (BPA),
which are known to the State of California to cause cancer and birth defects or other reproductive harm.
For more information visit www.P65Warnings.ca.gov.

IMPORTANT SAFEGUARDS IS2
COFFEE/TEA BREWERS, IMPORTANT SAFEGUARDS/SYMBOLS 121622J
CE Requirements
• This appliance must be installed in locations where it can be overseen by trained personnel.
• For proper operation, this appliance must be installed where the temperature is between 5°C to 35°C.
• This appliance is not suitable for outdoor use.
• This appliance shall not be tilted more than 10° for safe operation.
• An electrician must provide electrical service as specimed in conformance with all local and national codes.
For safe use, an all-pole disconnection must be incorporated into the mxed wiring in accordance with the
wiring rules outlined in clause 7.12.2 of IEC 60335 for meeting the minimum electrical safety of this standard.
• This appliance must not be cleaned by water jet.
• This appliance can be used by persons aged from 18 years and above if they have been given supervision or
instruction concerning use of the appliance in a safe way and if they understand the hazards involved.
• Keep the appliance and its cord out of reach of children aged less than 18 years.
• Appliances can be used by persons 18 years and above with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have been given supervision or instruction
concerning use of the appliance in a safe way and understand the hazards involved.
• Children under the age of 18 years should be supervised to ensure they do not play with the appliance.
• If the power cord is ever damaged, it must be replaced by the manufacturer or authorized service personnel
with a special cord available from the manufacturer or its authorized service personnel in order to avoid a
hazard.
• Machine must not be immersed for cleaning.
• Cleaning and user maintenance shall not be made by children unless they are older than 18 years and
supervised.
• This appliance is intended to be used in household and similar applications such as:
– staff kitchen areas in shops, ofmces and other working environments;
– by clients in hotels, motels and other residential type environments;
– bed and breakfast type environments.
• This appliance not intended to be used in applications such as:
– farm houses
• Access to the service areas permitted by Authorized Service personnel only.
• The A-Weighted sound pressure level is below 70 dBA.
Disposal of Equipment
• This product contains plastic, metal and electronic components and is considered e-waste. At the end of
its life, this product must not be disposed of in normal household waster but can be instead delivered to a
collection point for recycling electric and electronic appliances, consult with the local municipality for proper
disposal guidelines.

INSTALLATION INSTRUCTIONS II2
Installation Instructions
Installation Requirements
• A secure surface capable of supporting the weight of the appliance.
• For units without an attached cord set attached or dual voltage units set up for use with 220 - 240 Volts:
"QQSPQSJBUFMZTJ[FE6-MJTUFEHSPVOEJOHUZQFQPXFSDBCMFUPNFFUUIFFMFDUSJDBMTQFDJmDBUJPOTGPSUIF
BQQMJBODF*GZPVIBWFRVFTUJPOTBCPVUUIFDPSSFDUDBCMFTJ[FBOEMFOHUIDPOTVMUBRVBMJmFEJOTUBMMFS*GUIF
appliance will be hard wired to a junction box, the power cable must be long enough so that the unit can be
moved for cleaning underneath.
• "HSPVOEFEFMFDUSJDBMDPOOFDUJPOUPBOFMFDUSJDBMDJSDVJUUIBUNFFUTUIFFMFDUSJDBMTQFDJmDBUJPOTPGUIF
appliance (see SPECIFICATIONS). The circuit must be protected by the appropriate sized circuit breaker. If
you are not certain that the existing circuit meets the requirements for your unit, consult a licensed electrician.
• "XBUFSmMUSBUJPOTZTUFNJTSFRVJSFEUPNBJOUBJOUSPVCMFGSFFPQFSBUJPO8JMCVS$VSUJT$P*ODSFDPNNFOETB
8JMCVS$VSUJTBQQSPWFEXBUFSmMUFS4FFUIF$VSUJT&RVJQNFOU$BUBMPHGPSBGVMMMJOFPG8JMCVS$VSUJTBQQSPWFE
XBUFSmMUFST
• 1PUBCMFXBUFSTVQQMZMJOFDPOOFDUJPOGSPNUIFXBUFSmMUFSDBQBCMFPGTVQQMZJOHUIFNJOJNVNnPXSBUFSFRVJSFE
CZUIFTQFDJmDBUJPOT5IFXBUFSTVQQMZMJOFNVTUCFBCMFUPDPOOFDUUPUIFnBSFmUUJOHPOUIFCBDLPGUIF
VOJU4FFUIFSPECIFICATIONS section for the correct size. The water line should also be capable of being
controlled by a shut off valve. Do not connect the water line to a saddle valve or needle valve.
*&$SFRVJSFTUIFGPMMPXJOHXBUFSDPOOFDUJPO
1A quick disconnect or additional coiled tubing (at least two times the depth of the appliance) is required
so that it can be moved for cleaning underneath.
2 5IJTFRVJQNFOUJTUPCFJOTUBMMFEXJUIBEFRVBUFCBDLnPXQSPUFDUJPOUPDPNQMZXJUIBQQMJDBCMF
federal, state and local codes.
 8BUFSQJQFDPOOFDUJPOTBOEmYUVSFTEJSFDUMZDPOOFDUFEUPBQPUBCMFXBUFSTVQQMZTIBMMCFTJ[FE
installed and maintained in accordance with federal, state and local codes.
WARNING:*OTUBMMBUJPOJTUPCFQFSGPSNFEPOMZCZBRVBMJmFEJOTUBMMFS
WARNING: Improper electrical connection may result in an electric shock hazard or damage the unit. This
appliance must be properly grounded.
NOTICE: DO NOT connect this appliance to a hot water supply. The water inlet valve is not rated for hot
water. Do not exceed the maximum water pressure stated in the SPECIFICATIONS section.
IMPORTANT: Observe all governing codes and ordinances.
#3&8&34=41&$*"-5:%*41&/4&34(&/&3*$*/45"--"5*0/*/4536$5*0/4 F
5IF*OUFSOBUJPOBM1MVNCJOH$PEFPGUIF*OUFSOBUJPOBM$PEF$PVODJMBOEUIF'PPEBOE%SVH"ENJOJTUSBUJPO
'%"'PPE$PEFNBOVBMEJSFDUUIBUUIJTFRVJQNFOUNVTUCFJOTUBMMFEXJUIBEFRVBUFCBDLnPX
QSFWFOUJPOJODPNQMJBODFXJUIGFEFSBMTUBUFBOEMPDBMDPEFT'PSVOJUTJOTUBMMFEPVUTJEFPGUIF64"
make sure that the installation is in compliance with the applicable plumbing/sanitation code for your area.

Installation
Leveling
1 Position the brewer on the counter top. Level it left to
right and front to back by turning the bottom of the
legs.
Connecting the Brewer Wiring on Brewers Operated
with a 220 Volt (nominal) power supply.
2 Remove the screws that hold the back panel in place
and remove it.
3 Loosen the strain relief on the back of the brewer.
4 On dual voltage units being operated at 220 Volts
disconnect the existing power cable from the terminal
block and remove. Disconnect and cap the jumper
wire between the “C” and “N” terminals on the
terminal block.
5 Feed the 220 Volt power cable into the brewer.
6 Connect the wires on the power cable to the terminal
block inside the brewer.
7 Tighten the strain relief and replace the back panel.
8 Connect the power cable wires to the terminals in
the junction box. See the ELECTRICAL SCHEMATIC
for the power supply requirements. Keep the power
supply to the brewer off until the water supply line is
connected.
INSTALLATION INSTRUCTIONS II17
BREWERS, REAR COVER, INSTALLATION INSTRUCTIONS 092519C
WARNING: Use the leveling legs to level the
brewer only. Do not use them to adjust brewer
height. Do not extend them higher than necessary.
&RQ¿JXUDWLRQ
YDULHV
WARNING: Turn off power to the junction box at
the circuit breaker panel before connecting the
power cable to the brewer. Lock out and tag the
circuit breaker.
7HUPLQDO
EORFN
6WUDLQ
UHOLHI
%DFN
SDQHO

Connecting the Water Supply
9 Flush the water supply line prior to installation to purge
BJSBOEEFCSJTGSPNUIFXBUFSmMUFSBOEUVCJOH
10 $POOFDUUIFXBUFSTVQQMZMJOFUPUIFnBSFmUUJOHPO
the back of the brewer. Leave the water supply valve
closed until the power is connected.
Powering Up the Brewer
Brewers With A Cord Set Attached
11 On brewers with a cord set attached, connect the
power cord to the appropriate electrical outlet.
12 Make sure that the circuit breaker supplying power to
the brewer is on.
13 Turn on the water supply valve.
14 Turn the toggle switch on the back of the brewer to the
0/QPTJUJPO5IFXBUFSUBOLXJMMTUBSUUPmMM8IJMFUIF
UBOLJTmMMJOHJOTQFDUUIFXBUFSTVQQMZMJOFGPSMFBLT
15 When the water in the tank rises to the correct level, the
heating elements will turn on automatically. Depending
on the incoming water temperature and the electrical
TQFDJmDBUJPOTUIFXBUFSUBOLUZQJDBMMZSFRVJSFTUP
minutes to reach the factory set operating temperature.
When the water has heated, Ready to brew will be
displayed on the LCD screen.
16 Perform a brew cycle of a least 12 oz./350 ml to purge
any remaining air from the system. See OPERATING
INSTRUCTIONS. During the initial brew cycle and
XIFOFWFSUIFmMUFSJTSFQMBDFEZPVNBZIFBSUIF
TPVOETPGBJSCFJOHQVSHFEGSPNUIFmMUFSUVCJOHBOE
water tank.
INSTALLATION INSTRUCTIONS II17
BREWERS, REAR COVER, INSTALLATION INSTRUCTIONS 092519C
WARNING: Connect the power cord only to the
appropriate type and size electrical outlet. If the
electrical outlet is not compatible with the power
cord, have it upgraded by a licensed electrician. Do
not modify the power plug. Do not use an extension
cord. Do not use a power cord/plug that is damaged.
IMPORTANT: When operating the brewer at
higher elevations, reduce the factory set operating
temperature (200°F.92°C) by 2°F/1°C for each
1000 ft. (300 m) of elevation above 4000 ft
(1200 m). See PROGRAMMING GUIDE section.

OPERATING INSTRUCTIONS OI24
(5)&3."-%&$"/5&3#3&8&301&3"5*/(*/4536$5*0/4øø "
Brewing Instructions
 Center an empty thermal
decanter (pourpot) under the
brew basket.
3 *OTFSUBDMFBOQBQFSmMUFSJOUP
the brew basket.
4 'JMMXJUIUIFQSPQFSBNPVOU
of ground coffee. Level the
DPGGFFJOUIFmMUFS
5 4MJEFUIFmMMFECSFXCBTLFU
JOUPUIFCSFXSBJMTVOEFSUIF
DPOUSPMQBOFM4MJEFJUBMMUIF
XBZCBDLVOUJMJUTUPQT
5IFCSFXFSXJMMCSFXDPGGFFCBTFEPOUIFTFUUJOHTQSPHSBNNFEJOUPUIFVOJWFSTBMDPOUSPMNPEVMF6$.5P
DIBOHFUIFTFUUJOHTTFFUIFPROGRAMMING GUIDETFDUJPO
 The brewer should be ON.
$POmSNUIJTBUUIFSFBSUPHHMF
TXJUDIi3FBEZUPCSFXw
TIPVMECFPOUIFEJTQMBZ
6 1SFTTUIFCSFXCVUUPO#SFXJOH
XJMMCFHJOJNNFEJBUFMZ
WARNING - TO AVOID SCALDING, AVOID SPLASHING. ,FFQ CPEZ QBSUT DMFBS PG UIF CSFXFS EVSJOH
CSFXJOH%POPUSFNPWFUIFCSFXCBTLFUXIJMFi#SFXJOHwBQQFBSTPOUIFEJTQMBZ
The G3 Brewer is factory preset for optimal performance.

NOTICE - Do not use cleaning liquids, compounds or powders containing chlorine (bleach) or corrosives.
5IFTFQSPEVDUTQSPNPUFDPSSPTJPOBOEXJMMEBNBHFUIFmOJTIFT USE OF THESE PRODUCTS WILL VOID
THE WARRANTY.
CLEANING INSTRUCTIONS CI1
Cleaning The Brewer - Daily
BREWERS - GENERIC, CLEANING INSTRUCTIONS 080416B
WARNING: HOT SURFACES - To avoid injury, allow the brewer and dispenser(s) to cool before cleaning.
The brewer should be OFF.5VSOUIFCSFXFSPGGCZnJQQJOHUIFSFBSUPHHMFTXJUDIUPUIF0''QPTJUJPO
1 Remove the dispenser(s). Wipe exterior brewer surfaces with a damp cloth to remove spills and debris.
2 Remove the brew basket(s) and clean them in a mild detergent solution. Use a soft bristled brush for hard to
clean areas. Rinse with clean water, then dry.
3 Wipe the spray head area with a cloth soaked in a mild detergent solution. Rinse with a cloth soaked with
clean water removing any residual detergent. Use a clean, soft cloth to dry.
4 Dump out the drip tray(s) (if applicable). Rinse with clean water, then dry with a soft, clean cloth.
Cleaning The Brewer - Weekly
The brewer should be OFF.5VSOUIFCSFXFSPGGCZnJQQJOHUIFSFBSUPHHMFTXJUDIUPUIF0''QPTJUJPO
1 Remove the spray head(s), unscrewing counterclockwise from the dome plate.
2 Thoroughly clean and rinse the dome plate area.
3 Clean the brew basket rails with a brush soaked with a mild detergent solution. Rinse the area with a cloth
soaked with clean water, removing any residual detergent.
4 Dry the area with a soft, clean cloth.
5 Reattach the spray head(s).
WARNING: DO NOT immerse the brewer in water or any other liquid.

Cleaning the Airpot/Pour Pot (Daily)
CLEANING INSTRUCTIONS CI9
10631054"*31054$-&"/*/(*/4536$5*0/4ø #
WARNING: DO NOT immerse the airpot/pour pot or lid assembly in water or any other liquid. Do not place the
airpot/pour pot or lid in a dishwasher. Placing a airpot or pour pot in a dishwasher will void the warranty.
Cleaning Airpots
 Wash - Wipe the exterior surfaces of the airpot and
lid with a sponge soaked with the detergent solution
to remove spills and debris. Fill the liner with the
detergent solution. Use a sponge cleaning brush to
clean inside. Clean the spout/siphon tube with the
detergent solution.
 Rinse - Rinse the airpot and the spout/siphon tube
with clean, warm water.
3 Sanitize - Sanitize the interior of the airpot, the
spout/siphon tube and the lid, using a commercial
sanitizer suitable for food grade applications. Swab,
brush or pressure spray the sanitizing solution
according to the directions on the package.
 Air Dry - Turn the airpot and lid upside down.
Allow all parts to air dry.
Cleaning Pour Pots
 Wash - Wipe the exterior surfaces of the pour pot
and lid with a sponge soaked with the detergent
solution to remove spills and debris. Fill the liner with
the detergent solution. Use a sponge cleaning brush
to clean inside.
 Rinse - Rinse the pour pot and the lid with clean,
warm water.
3 Sanitize - Sanitize the interior of the pour pot and
the lid, using a commercial sanitizer suitable for
food grade applications. Swab, brush or pressure
spray the sanitizing solution according to the
directions on the package.
 Air Dry - Turn the pour pot and lid upside down
and allow to air dry.
Start by preparing a mild solution of detergent and warm water. Remove the airpot/pour pot from the brewer and
remove/open the lid. On airpots, remove the nozzle assembly. Rinse.
Nozzle
assembly
TLXA2201G000 shown. Appearance and size varies
with model number.
CLXP6401S100 shown. Appearance and size varies
with model number.
NOTE: The stem on the bottom of TFT series pour pot lids have a built-in sensor used for the FreshTrac®
feature. Keep this stem free from coffee oil build-up for proper operation. After cleaning, inverting the lid
GPSTFDPOETSFTFUTUIF'SFTI5SBDUJNFS

PROGRAMMING GUIDE PG9
With unit OFF, press and hold
bottom right BREW button (4).
Then press and release
ON/OFF button. Continue to
hold down BREW button until
Enter Code appears.
Enter 4 digit code.
(factory default = 1-2-3-4)
Curtis
Entering
Programming mode
Enter Code
- - - -
To enter programming mode:
<Program Menus>
ÅSelect Æ
Brew by Volume
ÅSelect Æ
Brew by Time
ÅSelect Æ
Quality Timer
ÅSelect Æ
PulseBrew On/Off
ÅSelect Æ
Drip-Out Mode
ÅSelect Æ
Temperature
ÅSelect Æ
Energy Save Mode
ÅSelect Æ
Brew Count Odom.
ÅSelect Æ
Brew Count Total
ÅSelect Æ
Cold Brew Lock
ÅSelect Æ
Master Reset
ÅSelect Æ
Service Call
ÅSelect Æ
Banner Name
ÅSelect Æ
Warmers Auto-Off
ÅSelect Æ
*Alpha series brewers only.
P-Maintenance
ÅSelect Æ
Beeper On/Off
ÅSelect Æ
FreshTrac - Glass
ÅSelect Æ
*
*
Display Messages
ÅSelect Æ
Language
ÅSelect Æ
Model Select
ÅSelect Æ
Displ. Brew Time
ÅSelect Æ
Pre-Infusion
ÅSelect Æ
Access Code
ÅSelect Æ
Exit
ÅSelect Æ
®
®
8$8$130(3"..*/((6*%&ø $
IMPORTANT: All programming functions are performed with the
three center buttons.
The symbols below the buttons are:
 Ż 4DSPMM61
~4&-&$5PS&/5&3UPTBWFOFXQBSBNFUFS
Ź4DSPMM%08/
Once you enter programming mode, press Żor Źto scroll UP or DOWN
through the various functions/features. Press ~4FMFDUUPNBLFDIBOHFT
to the function/feature displayed. Then press Żor Źto scroll through
the various available settings. See Programming Options for detailed
descriptions.
%XWWRQODEHOV
PD\YDU\

Programming Options
4FFUIFmSTUQBHFPGUIFQSPHSBNNJOHHVJEFGPSJOTUSVDUJPOTPOBDDFTTJOHFBDIJOEJWJEVBMNFOVJUFN
Some menus save and exit automatically when a parameter is updated. Other menus exit to the previous menu
when a parameter is saved. To exit, press Źuntil EXIT appears on the display, then press ~.
Brew by Volume - BEKVTUTUIFWPMVNFCSFXFEUIFGBDUPSZEFGBVMUJTP[M8JUIBOFNQUZBJSQPUJO
place, press the appropriate BREW button. When the desired volume is reached, press the same BREW
button again to stop the brew cycle and set the volume.
Brew by Time - adjusts the amount of coffee brewed by time rather than by volume (the factory default is
NJOTFD0ODFBDDFTTFEQSFTTŻor ŹVOUJMUIFOVNCFSPGNJOVUFTJTnBTIJOH5IFOQSFTT~repeatedly to
change the number value. Press Żor ŹVOUJMUIFOVNCFSPGTFDPOETJTnBTIJOH5IFOQSFTT~repeatedly to
change the number value. Press Żor ŹVOUJMiFYwJTnBTIJOHUIFOQSFTT~to exit.
Temperature - TFUTUIFCSFXJOHUFNQFSBUVSFPGUIFXBUFSIFMEJOUIFXBUFSUBOLUIFGBDUPSZEFGBVMUJT
'¡$5IFSBOHFJT'UP'$UP$0ODFBDDFTTFEQSFTTŻor Źto choose the
desired temperature. Then press ~to set and exit.
Energy Save Mode - TBWFTFOFSHZEVSJOHQFSJPETXIFOUIFCSFXFSJTOPUJOVTFUIFGBDUPSZEFGBVMUJT0''
8IFOTFUUP0/UIFCSFXFSBVUPNBUJDBMMZTIVUTPGGUXPIPVSTBGUFSUIFMBTUCSFXDZDMF1SFTTUIF0/0''
CVUUPOUPSFUVSOUPOPSNBMPQFSBUJPO8IFOTFUUP0/'¡$UIFCSFXFSTIVUTPGGUXPIPVSTBGUFSUIF
MBTUCSFXDZDMFCVUUIFXBUFSUBOLUFNQFSBUVSFSFNBJOTBU'6TFUIF0/'TFUUJOHUPSFBDICSFXJOH
temperature faster after periods of non-use. Once accessed, press Żor Źto choose the desired setting.
Then press ~to set and exit.
Brew Count Odom - When accessed, this feature displays the total brew cycles since the odometer was last
reset. Press Żto exit or ~reset and exit.
Pre-Infusion - sets the brewer Pre-Infusion time (Pulse Brew must be off to access, the factory default is
%JTBCMFE1SF*OGVTJPOJODSFBTFTDPOUSPMPGDPGGFFDMBSJUZBOEFYUSBDUJPO8IFOUVSOFEPOUIFSBOHFJTUP
seconds. Once accessed, press Żor Źto choose the desired setting, then, press ~to exit. To turn off pulse
CSFXNPEFDIPPTFGPSUIFUJNF
When Pre-infusion is ON, Pulse Brew disappears from the list of menu items.
Quality Timer -OPUJmFTUIFVTFSUIBUUIFDPGGFFJTOPMPOHFSGSFTICZNPOJUPSJOHUIFBNPVOUPGUJNFTJODFUIF
#3&8CVUUPOXBTMBTUQSFTTFEUIFGBDUPSZEFGBVMUJT0GG8IFOUJNFFYQJSFTBOBVEJPBMBSNUVSOTPOBOE
“Quality Timer”nBTIFTPOUIFEJTQMBZ0ODFBDDFTTFE~QSFTTŻor Źto increase or decrease the amount
PGUJNF5IFSBOHFJT0GGUPNJOVUFTIPVST1SFTT~to set and exit.
Brew Count Total - when accessed, displays the total brew cycles on the brewer. It cannot be reset. The
display returns to the previous screen automatically after a few seconds.
Cold Brew Lock - adjusts the temperature at which the brewer will brew coffee when the BREW button is
pressed (Ready to BrewBQQFBSTPOUIFEJTQMBZUIFGBDUPSZEFGBVMUJT'¡$5IJTGFBUVSFBMTPBEKVTUTUIF
UFNQFSBUVSFBUXIJDIUIFIFBUJOHFMFNFOUUVSOTPOUPSFIFBUUIFXBUFSJOUIFUBOL5IFBWBJMBCMFTFUUJOHTBSF
¡'¡$BOE¡'0ODFBDDFTTFEQSFTTŻor Źto choose the desired setting. Then press ~to set and
exit.
Master Reset - SFTFUTUIFCSFXFSVOJWFSTBMDPOUSPMNPEVMF6$.UPUIFGBDUPSZEFGBVMUTFUUJOHT0ODF
accessed, “Are You Sure?” will appear on the display. Press Żfor Yes or Źfor No.
PROGRAMMING GUIDE PG9
8$8$130(3"..*/((6*%&ø $

PROGRAMMING GUIDE PG9
Programming Options (cont.)
Service Call - sets the service phone number that appears on the display when the UCM detects a SENSOR
ERROR or WATER ERROR . Once accessed, press Żor Źto choose the number to be changed. Then press
~repeatedly to change the number value. Press Żor Źto choose the next number to change or choose exit
and press ~.
Access Code - TFUTUIFBDDFTTDPEFFOUFSFEUPBDDFTTQSPHSBNNJOHNPEFUIFGBDUPSZEFGBVMUJT
Once accessed, press Żor Źto choose the number to change. Then press ~repeatedly to change the
OVNCFSWBMVFSBOHFJTUP1SFTTŻor Źto choose the next number to change or choose exit and
press ~.
Banner Name - changes the banner name that appears on the display (the factory default is Curtis/P
CBOOFSOBNFBQQFBSTXIFOBMMCMBOLTBSFFOUFSFE0ODFBDDFTTFEQSFTTŻor Źto choose the letter to
change. Then press ~repeatedly to change the letter value. Press Żor Źto choose the next letter to change
or choose ex and press ~to exit.
Warmer Auto-Off - "MQIBTFSJFTVOJUTPOMZBEKVTUTUIFMFOHUIPGUJNFUIBUFMBQTFTCFGPSFUIFXBSNFSTTIVU
PGGBVUPNBUJDBMMZ5IFSBOHFJT0GGUPIPVSTUIFGBDUPSZEFGBVMUJT0GG0ODFBDDFTTFEQSFTTŻor Źto
adjust the number of hours. Then press ~to set and exit.
P-Maintenance - UVSOTPOPGGBOEBEKVTUTUIF1.BJOUFOBODFQSFWFOUJWFNBJOUFOBODFCSFXNPOJUPS
UIFGBDUPSZEFGBVMUJT0''8IFO0/UIF6$.NFBTVSFTUIFOVNCFSPGHBMMPOTCSFXFECFGPSFUIF
1.BJOUFOBODFSFNJOEFSBQQFBSTPOUIFEJTQMBZ5IFSBOHFJT0GGUPHBMM0ODFBDDFTTFE
press Żor Źto choose the desired setting, then, press ~to exit.
Beeper On/Off - turns the beeper that is heard each time a button is pressed on or off (the factory default is
0/0ODFBDDFTTFEQSFTTŻor Źto choose the desired setting. Then, press ~to exit.
Pulse Brew - TFMFDUTUIFQVMTFCSFXQBUUFSO1SF*OGVTJPONVTUCFPGGUPBDDFTTUIFGBDUPSZEFGBVMUJT$5IF
QVMTFCSFXQBUUFSOTFMFDUFEiUVOFTwPSDIBOHFTUIFnBWPSPGUIFDPGGFF0ODFBDDFTTFEQSFTTŻor Źto
choose the desired setting. Then, press ~to exit.
8IFO1VMTF#SFXJTPO$PME#SFX-PDLJTTFUXJUIJO'¡$BOE$PME#SFX-PDLBOE1SF*OGVTPO
disappear from the list of program selections.
Pulse Brew Guidelines
• 'JMUFSQBDLUZQFDPGGFFTUZQJDBMMZFYUSBDUCFUUFSXJUIUIF"BOE#QVMTFTFUUJOH
• Decaffeinated coffees typically extract better with the B pulse setting.
• High-yield coffees typically extract better with the C pulse setting. Of course, any of the A, B or C
TFUUJOHTNBZCFVTFEUPTVJUZPVSUBTUFQSPmMF
• Settings D and E are manual pulse counts.
8$8$130(3"..*/((6*%&ø $
Setting Description
A Starts at beginning of brew cycle. 4 cycles of 10 seconds on and 5 seconds off, then on until end of brew cycle.
BStarts towards end of brew cycle (without drip-out mode). 4 cycles of 5 seconds off and 4 cycles of 10 seconds on.
Ends when brew cycle ends.
C Starts at beginning of brew cycle. 5 cycles of 25 seconds on and 10 seconds off, then on until end of brew cycle.
DManually set. Starts 30 seconds after brew cycle starts. Number of pulses is adjustable from 1 to 10. Pulse on time
and off time are both adjustable from 5 to 60 seconds.
EManually set. Starts at beginning of brew cycle. Number of pulses is adjustable from 1 to 24. Pulse on time and off
time are both adjustable from 1 to 150 seconds.

PROGRAMMING GUIDE PG9
8$8$130(3"..*/((6*%&ø $
Programming Options (cont.)
Display Brew Time - UVSOTUIFEJTQMBZPGUIFCSFXUJNFEVSJOHCSFXJOHPOPSPGGUIFGBDUPSZEFGBVMUJT0/
Once accessed, press Żor Źto choose the desired setting, then press ~to exit.
FreshTrac-Glass - "MQIB'SFTI5SBDVOJUTPOMZBMMPXTUIFPQFSBUPSUPDPOUSPMXIFOUIF'SFTI5SBD-&%PO
UIFEFDBOUFSXJMMnBTI0ODFBDDFTTFEQSFTTŻor ŹUPDIBOHFUIFBNPVOUPGUJNFUIFGBDUPSZEFGBVMUJT
NJOUIFOQSFTT~to exit.
Drip-out Mode - TFUTUIFESJQPVUNPEFUJNFS"GUFSXBUFSTUPQTnPXJOHJUBMMPXTBEEJUJPOBMUJNFGPSUIF
XBUFSUPESBJOGSPNUIFCSFXCBTLFUCFGPSFUIFCSFXCBTLFUMPDLSFMFBTFTUIFGBDUPSZEFGBVMUJTNJO5IJT
GFBUVSFSFEVDFTUIFDIBODFUIBUUIFCSFXCBTLFUXJMMCFSFNPWFEUPPFBSMZ5IFSBOHFJT0''UPNJO0ODF
accessed, press Żor Źto choose desired setting, then, press ~to exit.
Display Messages - UVSOTEJTQMBZPGUIFNFTTBHFi3JOTF4FSWFS#FGPSF#SFXJOHw0/PS0''UIFGBDUPSZ
EFGBVMUJT0/0ODFBDDFTTFEQSFTTŻor Źto choose the desired setting, then press ~to exit.
LanguageDIBOHFTUIFMBOHVBHFUIBUBQQFBSTPOUIFEJTQMBZUIFGBDUPSZEFGBVMUJT&OHMJTI0ODFBDDFTTFE
press Żor ŹUPDIPPTFUIFEFTJSFETFUUJOH&OHMJTIPS'SFODIUIFOQSFTT~to set and exit.
Model Select - changes the model number and number of batches (to match the label on the universal control
NPEVMFUIFGBDUPSZEFGBVMUJT"MQIB0ODFBDDFTTFEQSFTTŻor Źuntil the model number matching
the model number label on the brewer appears, then press ~. Press Żor Źuntil the number of batches
matches the number of batch sizes on the UCM label, then press ~to exit.

ROUGH-IN DRAWINGS RD37
D60 Thermal Decanter Coffee Brewers
D60, ROUGH-IN DRAWING 052119C
8.13 in
[20.7 cm]
8.11 in
[20.6 cm]
17.75 in
[45.1 cm] 12.51 in
[31.8 cm]
1.20 in
[3.0 cm]
20.38 in
[51.8 cm]
9.11 in
[23.1 cm]
19.25 in
[48.9 cm]
16.63 in
[42.2 cm]
with WC-3316
brew basket
with WC-3621-101
brew basket

ILLUSTRATED PARTS LIST IP56
D60, ILLUSTRATED PARTS/RECOMMENDED PARTS 052119B
11A
11B
8
30
25
5
29
9
26
26
5
20
21
13
26
31
14
12
15
28
3
27
24
17
*
7A
7B
7C
7D
2A
2B 19A
19B
23
16A
16B
16C
22A
22B
10A
10B
D60GT - Main Chassis - Exploded View
* Water tank assemblies:
- 120 Volt, see section IP57
- Dual Voltage, see section IP58
- Export, see section IP59
6
A
4
18
1

ILLUSTRATED PARTS LIST IP56
D60, ILLUSTRATED PARTS/RECOMMENDED PARTS 052119B
ITEM # PART # DESCRIPTION
1 WC-4213-P aNUT, 5/8 LOCK PLATED
2A WC-889 1,3 VALVE, DUMP LEFT 120V 12W ALPHA’S/D1000/
GEM-12/TLP
2B WC-860 2VALVE, DUMP LEFT 240V 12W
3 WC-3518 LEG, GLIDE 3/8”-16 STUD SCREW
4 WC-2962K aKIT, FITTING SPRAYHEAD SS
5 WC-1806 SEAT CUP, SILICONE USE ON WC-1809 FAUCET
6 WC-37132-101 KIT, VALVE REPAIR FOR DELTROL
WC-820WDR,WC-821WDR, WC-844WDR
7A WC-774 1,3 CONTROL MODULE, UCM 120V ALPGT/D500GT/
D60GT
7B WC-724 2CONTROL MODULE, UCM 220V ALPGT D500GT/
D60GT
7C WC-37064 1,3 KIT, LABEL & UCM D500GT/H THERMAL ALPHA
CURTIS (INCLUDES ITEMS 7A AND 8)
7D WC-37348 2KIT, LABEL & UCM D500GT 220V (INCLUDES
ITEMS 7B AND 8)
8 WC-39346 LABEL, UCM OVERLAY D500GT/H D60GT
CURTIS
9 WC-29025 SPRAYHEAD, PURPLE ADVANCE FLOW
10A WC-8556 1,3 HEATSINK, ASSY DV ALPDS/D500AP TCTD/
PTTD
10B WC-8597 2HEATSINK, MOUNTING ASSY ALPHA-DS
11A WC-3316 BREW CONE, W/HANDLE ASSY 7.1”D.W/WC-
3317 & WC-3323 ALP/AP
11B WC-3621-101 BREW CONE, NON-METAL UNIVERSAL (WITH
SPLASH POCKET)
12 WC-5985 COVER, BACK CTR WRAP D60GT/ALP TALL
13 WC-2401-P KIT, ELBOW 3/8 NPT X 1/4 FLARE
14 WC-1412 CORD GRIP, 3/4” FOR METAL CORD TO .81”OD
15A WC-1200 1,3 CORD, 14/3 SJTO 6’ BLK W/PLUG
15B WC-1231-102 2CORD, 2.5 mm² 90ºC 36A 450/750 V STRIPPED
W/FERRULES ONE END
ITEM # PART # DESCRIPTION
16A WC-13323 1HARNESS ASSY, CONTROL 120V W/O POWER
BLOCK ALPHA-GT/GS
16B WC-13280 2HARNESS ASSY, CONTROL ALPHAGT-30’S
16C WC-13315 3HARNESS ASSY, CONTROL 120/220V W/POWER
BLOCK ALPHA-GT/GS
17 WC-29044-101 SLEEVE, OVERFLOW
18 WC-4320 aO’RING, 0.487I.D.x 0.693OD x0.103CS BUNA-N
#112
19A WC-826L 1,3 VALVE, INLET 1 GPM 120V 9W
19B WC-856 2VALVE, INLET 1 GPM 240V 6W
20 WC-5310 TUBE, 5/16 ID x 1/8W SILICONE GEN USE
21 WC-5231 COMPOUND, HEAT SINK 5OZ
22A WC-102 1SWITCH, TOGGLE NON-LIT SPST 15A 125/6A
250VAC RESISTIVE
22B WC-103 2,3 SWITCH, TOGGLE NON-LIT DPST 25A
125/250VAC RESISTIVE
23 WC-58117 COVER, TOP ALPGT/D500GT/D60GT TLP/TCTS/
CBS/GEMSS
24 WC-3503 LEG, 3/8”-16 STUD SCREW BUMPER
25 WC-37252 KIT, HOT WATER FAUCET REPLACEMENT
ALPGT/D60GT/D500GT
26 WC-4426 SCREW, 8-32x3/8 PH HEAD TRUSS
27 WC-596K 3KIT, NOISE FILTER EMI 250V/30A 1PH
28 WC-314 2,3 POWER BLOCK, 5 STATION
29 WC-6221
GRID, DRIP TRAY SS C250/500/1000/
TL9001/9002/SCTL9002 (OLDER UNITS WITH A
SUMP IN THE BASE)
30 WC-39805 LABEL, GOLD CUP NAMEPLATE
31 WC-4616 SCREW, 1/4-20 x 1/2 PHILLIPS PAN HEAD
STAINLESS STEEL
D60GT - Main Chassis - Parts List
ITEM # PART # DESCRIPTION
2A WC-889 VALVE, DUMP LEFT 120V 12W ALPHA’S/D1000/
GEM-12/TLP
6 WC-37132-101 KIT, VALVE REPAIR FOR DELTROL
WC-820WDR,WC-821WDR, WC-844WDR
7C WC-37064 KIT, LABEL & UCM D500GT/H THERMAL ALPHA
CURTIS (INCLUDES ITEMS 7A AND 8)
9 WC-29025 SPRAYHEAD, PURPLE ADVANCE FLOW
19A WC-826L VALVE, INLET 1 GPM 120V 9W
ITEM # PART # DESCRIPTION
20 WC-5310 TUBE, 5/16 ID x 1/8W SILICONE GEN USE
21 WC-5231 COMPOUND, HEAT SINK 5OZ
22A WC-102 SWITCH, TOGGLE NON-LIT SPST 15A 125/6A
250VAC RESISTIVE
22B WC-103 SWITCH, TOGGLE NON-LIT DPST 25A
125/250VAC RESISTIVE
D60GT - Recommended Parts to Stock
1D60GT12, 2D60GT30, 3D60GT63
a1HZHUXQLWV6WDLQOHVVVWHHOÀWWLQJNLW$LVFRPSDWLEOHZLWKROGHUXQLWV
EOlder units.

ILLUSTRATED PARTS/RECOMMENDED PARTS IP57
8$ø5"/,"44&.#-:*--6453"5&%1"3543&$0..&/%&%1"354 #
ITEM # PART # DESCRIPTION
1 WC-6289 TANK, COMPLETE ALPHA-GT 120V W/WC- 523 HI
LIMIT THERMOSTAT
2 WC-5853-102 COVER, TOP HEATING TANK GEN USE
3 WC-43062* GASKET, TANK LID
4A1WC-5528K* KIT, WATER LEVEL PROBE, SILICONE
4B2WC-5502-01* KIT, PROBE, ASSY WATER LEVEL W/HEX FITTING,
O-RING & NUT
5 WC-917-04* ELEMENT, HEATING 1.45KW 120V W/JAM NUTS &
SILICONE O-RING
ITEM # PART # DESCRIPTION
6 WC-1438-101* SENSOR, TEMPERATURE TANK
7 WC-4394* GUARD, SHOCK/HEATING ELEMENT FOR SINGLE
HEATING ELEMENT
8 WC-523* THERMOSTAT, MANUAL RESET 120/ 240 VAC 25A
220 DEG F MAX
9 WC-37365* KIT, FITTING TANK INLET
10 WC-37266* KIT, FITTING TANK OVERFLOW
11 WC-37317* KIT, STRAIGHT FITTING & BUSHNG 8mm GEN USE
WC-6289 - Tank Assembly - 120 Volt
2
3
4A
9
6
10
11
1
5
8
Parts List
1Units built 01/04/2019 and later.
2Units built before 01/04/2019. Replaces WC-5527.
*Recommended parts to stock.
4B
7
Water Level Probe Detail
(Older Units)

ILLUSTRATED PARTS/RECOMMENDED PARTS IP58
8$ø5"/,"44&.#-:*--6453"5&%1"3543&$0..&/%&%1"354 #
ITEM # PART # DESCRIPTION
1 WC-6285 TANK, COMPLETE ALPHA-GT DV 120/220V
2 WC-5853-102 COVER, TOP HEATING TANK GEN USE
3 WC-43062* GASKET, TANK LID
4A1WC-5528K* KIT, WATER LEVEL PROBE, SILICONE
4B2WC-5502-01* KIT, PROBE, ASSY WATER LEVEL W/HEX FITTING,
O-RING & NUT
5 WC-917-04* ELEMENT, HEATING 1.45KW 120V W/JAM NUTS &
SILICONE O-RING
6 WC-1438-101* SENSOR, TEMPERATURE TANK
ITEM # PART # DESCRIPTION
7 WC-4394* GUARD, SHOCK/HEATING ELEMENT FOR SINGLE
HEATING ELEMENT
8 WC-522* THERMOSTAT, HI LIMIT HEATER CONTROL DPST
277V 40A
9 WC-37365* KIT, FITTING TANK INLET
10 WC-37266* KIT, FITTING TANK OVERFLOW
11 WC-37317* KIT, STRAIGHT FITTING & BUSHNG 8mm GEN USE
12 WC-43055* GUARD, SHOCK RESET THERMOSTAT (WC-522)
WC-6285 - Tank Assembly - Dual Voltage
2
3
4A
7
6
8
12
10
1
5
9
11
Parts List
1Units built 01/04/2019 and later.
2Units built before 01/04/2019. Replaces WC-5527.
*Recommended parts to stock.
4B
Water Level Probe Detail
(Older Units)