CWT Advantage 1428 User manual

Assembly Guide
CWT Lamination Table
CWT 1428 Advantage
Revision

Included parts
Table top
Package of girders
Package of L-plates
Package of legs
Glide beam
Roll and holder for Glide beam
Package of end plates
Glass
White PVC
Cutting mat
Installation kit (two boxes)
Support stand

7x
M5x16
5x
M8x20
5x
M8x35
17x
M8x90
13x
M12x30
9x
M12x90

5x
M8
21x
M12
21x
8,4x16x1,6
9x
13x24x2,5
8x

Tools needed for assembly
Metric allen keys:
M5 -3
M8 - 6
M12 - 10
Metric wrenches:
M8 -13
M12 - 19

4 x M8x90
4 x 8,4 washer
Lift the girder and tighten the screws

8 x M8x90
8 x 8,4 washer
Lift the girder and tighten the screws

Cross measure the frame. Adjust the frame if the dimension differs more than 1mm.
2 x M8x20
4 x M8x20
4 x 8,4 washer

6 x M12x90
6 x 13 washer
6 x M12 nut

6 x M12x30
6 x M12 nut
2 x M8x35
2 x M8 nut
Remove:
2 x M12x90
2 x 13 washer
2 x m12 nut

Remove:
2 x M12x90
2 x 13 washer
2 x m12 nut

Connect the regulator to the hose
Connect air to the regulator and rise the roller.
Remove the regulator from the hose.

Make sure that the Glide beam are correctly aligned with the linear guide.

4 x M12x90
4 x 13 washer
4 x m12 nut

2 x M12x90
2 x 13 washer
2 x m12 nut
6 x M12x30
6 x m12 nut
2 x M8x35
2 x M8 nut

Dimension are from the wheels up to the table top.
795mm
845mm
895mm