Cybertek CP1000A User manual

Shenzhen Zhiyong Electronics Co., Ltd
www.cybertek.cn
Low FrequencyAC Clamp
CP1000A (1000A/20Hz~100kHz)
Shenzhen Zhiyong Electronics Co., Ltd
CYBERTEK

Shenzhen Zhiyong Electronics Co., Ltd
For your safety
Please strictly follow the safety tips below. If you don’t follow the instruction, the potential
consequences could damage the machine or hurt the users. We will not be responsible for any problem
caused by violating the rules
 Make sure the product is used in rated voltage and current range.
 Do not open the shell or try to connect cable during operation
 Do not use the probe in moist or combustible environment
 Make sure the device is dry and clean before using.
 If there’s anything wrong with the product, please contact us immediately. Do not open the shell and
try to repair the machine or worse incident could occur.
1. Summary
CP1000A current probe is used for alternating current testing. The current under test reaches effective
value of 1000A, peak value of 2000A, bandwidth of 100 kHz. Clamp diameter is around 54mm. With its
standard BNC output port, CP1000A can be connected to the oscilloscope of any brand. It has three optional
ranges and test small current easily. The additional optional accessories BNC to banana plug can realize the
connection with digital multi-meter. CP1000A can be widely used in the testing like motor drive, inverter,
power switch and avionics.
2. Product and Accessories
Clamp description
1. Clamp: used to fix the cable under test, diameter around 54mm
2. Range selection: provide three ranges: 10A(100mV/A), 100A(10mV/A),
1000A(1mV/A)
Warning
CYBERTEK

Shenzhen Zhiyong Electronics Co., Ltd
3. Output cable: around 2m with standard BNC output port
4. Current indication direction: the current flow through the current
direction is counted positive, otherwise it is negative.
Accessories
Optional: BNC (female) to banana plug (male)
3. Product Specification
Range
10A
100A
1000A
Continuous Current
10Arms
100Arms
1000Arms
Peak Value Current
30Apk
300Apk
2000pk
Current Transfer Ratio
100mV/A
10mV/A
1mV/A
Bandwidth
20Hz~100kHz
Rising time
≤3.5μs
Accuracy
0.1A...1A
≤2%
1A...10A
≤1%
10A...100A
≤0.5%
100A...1000A
≤0.3%
Relationship between
position and accuracy
0.2%(Typical)
Clamp diameter
54mm
Output Port
BNC
Output Cable length
2m
Safety Level
600V CATIII
Operating
Temperature/ Humidity
-10℃~55℃,80% or less
Storing Temperature/
Humidity
-40℃~70℃,80% or less
Operating Altitude
2000m
Size (Length* Width*
Height)
216*115*45mm
Weight
695g
CYBERTEK

Shenzhen Zhiyong Electronics Co., Ltd
4. Operating Steps
 Connect the probe to testing equipments and set the related parameter correctly
 Connect the probe with the circuit under test and make sure the circuit is turned off before
operating.
 Turn on the circuit under test and proceed with testing
 Turn off the circuit under test before taking off the probe after testing.
5. Packing List
Packing List
Name
Number
CP1000A
1
Instruction Manual and Warranty Card
1
Test Report
1
CYBERTEK
SHENZHEN ZHIYONG ELECTRONICS CO., LTD
Addr：Room A1702, Building 4, TianAn Cyber Park, HuangGe North Road, LongGang
District, ShenZhen City, China
Tel: [phone]
[phone]
Q Q: 400 852 0005
Fax: [phone]
Email: [e-mail] ©Zhiyong Electronics, 2018
Url: http://www.cybertek.cn Published in China, Jan. 1, 2018
CYBERTEK