CYP CPRO-U2T User manual

CPRO-U2T
4K UHD 1×2 HDMI Splitter
Operation Manual
Operation Manual

DISCLAIMERS
The information in this manual has been carefully checked and
is believed to be accurate. Cypress Technology assumes no
responsibility for any infringements of patents or other rights of third
parties which may result from its use.
Cypress Technology assumes no responsibility for any inaccuracies
that may be contained in this document. Cypress also makes no
commitment to update or to keep current the information contained
in this document.
Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer le, in any form or by any means—
electronic, mechanical, magnetic, optical, chemical, manual, or
otherwise—without express written permission and consent from
Cypress Technology.
© Copyright 2018 by Cypress Technology.
All Rights Reserved.
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.

SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of re,
electrical shock and injury to persons.
• To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU
if it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufcient space for air to circulate around the unit.
• Please completely disconnect the power when the unit is not in
use to avoid wasting electricity.
REVISION HISTORY
VERSION NO. DATE SUMMARY OF CHANGE
RDV1 16/08/16 Preliminary release
VS1 09/07/18 Final technical review

CONTENTS
1. Introduction......................................................1
2. Applications.....................................................1
3. Package Contents ..........................................1
4. System Requirements......................................1
5. Features............................................................2
6. Operation Controls and Functions.................2
6.1 Front Panel ................................................. 2
6.2 Rear Panel.................................................. 3
7. Connection Diagram ......................................4
8. Specications ..................................................5
8.1 Technical Specications .......................... 5
8.2 Video Specications................................. 6
8.3 Cable Specications ................................ 7
9. Acronyms .........................................................8

1
1. INTRODUCTION
This 4K UHD HDMI Splitter provides an advanced solution for splitting
and distributing a single HDMI input to 2 HDMI outputs. This distribution
amp provides a high level of audio and video performance with
support for video resolutions up to 4K@60Hz (4:2:0) and high denition
digital audio formats such as LPCM 7.1, with audio sampling rates up
to 192kHz, Bitstream, and HD Bitstream. Standard EDID management
functionality is included and the System Reset function allows the unit
to automatically change the input selection on any connected, CEC
enabled, TVs to the input the unit is currently connected to.
2. APPLICATIONS
• Classroom & Lecture Hall Presentations
• Showrooms & Demo Rooms
• Hotel Lobby Information Displays
• Public Commercial Displays
3. PACKAGE CONTENTS
• 1×1 by 2 HDMI Splitter
• 1×5V/1.2A DC Power Adapter
• 1×Rackmount Ears (Set of 2)
• 1×Shockproof Feet (Set of 4)
• 1×Operation Manual
4. SYSTEM REQUIREMENTS
• HDMI source equipment such as a media player, video game
console or set-top box.
• HDMI receiving equipment such as HDTVs, monitors or audio
ampliers.
• The use of “Premium High Speed HDMI” cables is highly
recommended.

2
5. FEATURES
• HDMI 2.0 and DVI 1.0 compliant
• HDCP 1.4 compliant
• 1 HDMI input and 2 HDMI outputs
• Supports HD resolutions up to 4096×2160@60Hz (4:2:0, 8-bit)
• Simultaneous display of a single 4K source on up to two 4K displays
• 3D signal support (with 3D source and compatible 3D TV)
• Supports pass-through of audio formats including LPCM 2.0/5.1/7.1,
Bitstream, and HD Bitstream
• System Reset function (CEC active source command)
• EDID management control including “Standard” (Internal EDID)
mode and “TV” (External Display EDID) modes
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
POWER IN
12
OUT EDID SYS-RST
ON OFF
SERVICE
STD TV
1 2 3 4 5 6
1POWER LED: This LED will illuminate to indicate the unit is on and
receiving power.
2IN LED: This LED will illuminate to indicate that a live source has
been detected on the input port. When no source is detected the
LED will remain off.
3OUT LEDs 1~2: These LEDs will illuminate to indicate when a valid
sink has been detected on the associated output port. When no
sink is detected the LED will remain off.
4EDID SWITCH: This switch controls the EDID management behavior
of the unit. When set to “TV” mode the unit will read and store
the EDID from the sink connected to output 1 and pass it to the
connected source. When set to “STD” mode the unit will use a built
in EDID dened as 1080p@60Hz, 8-bit, LPCM 2.0.

3
5SYS-RST SWITCH: Controls the CEC “active source” reset
functionality of the unit. When switched to the “ON” position
the unit will send a CEC active source reset command to all
connected displays every 8~10 minutes. This command requests
that any connected CEC compliant TVs switch to the input the unit
is connected on.
Note: The connected TV must have CEC support enabled. Not all
HDMI TVs support this CEC command.
6SERVICE: This slot is reserved for rmware update use only.
6.2 Rear Panel
DC 5V
OUT
IN 12
1 2 3
1DC 5V: Plug the 5V DC power adapter into the unit and connect it
to an AC wall outlet for power.
2IN: Connect to HDMI source equipment such as a media player,
game console or set-top box.
3OUT 1~2: Connect to HDMI TVs, monitors or ampliers for digital
video and audio output.

4
7. CONNECTION DIAGRAM
DC 5V
OUT
IN 12
DC 5V
OUT
IN 12
Media Player
Power Supply
UHDTV
HDMI Input
HDMI Outputs
UHDTV

5
8. SPECIFICATIONS
8.1 Technical Specications
HDMI Bandwidth 340MHz/10.2Gbps
Input Port 1×HDMI
Output Ports 2×HDMI
Power Supply 5V/1.2A DC
(US/EU standards, CE/FCC/UL certied)
ESD Protection Human Body Model:
±8kV (Air Discharge)
±4kV (Contact Discharge)
Dimensions 161mm×22mm×68mm (W×H×D)
[Case Only]
161mm×26mm×76.5mm (W×H×D)
[All Inclusive]
Weight 306g
Chassis Material Metal
Silkscreen Color Black
Operating Temperature 0 ˚C–40 ˚C/32 ˚F–104 ˚F
Storage Temperature -20 ˚C–60 ˚C/-4 ˚F–140 ˚F
Relative Humidity 20–90% RH (Non-condensing)
Power Consumption 1.21W

6
8.2 Video Specications
Resolution/Timing (Hz)
HDMI
Input
HDMI
Output
640×480p@60/72/75/85  
720×400p@70/85  
720×480i@59/60  
720×480p@59/60  
720×576i@50  
720×576p@50  
800×600p@56/60/72/75/85  
848×480p@60  
1024×768p@60/70/75/85  
1152×864p@70/75/85  
1280×720p@23/24/25/29/30/50/59/60  
1280×768p@60/60 (RB)/75/85  
1280×800p@60/60 (RB)/75/85  
1280×960p@60/85  
1280×1024p@60/75/85  
1360×768p@60  
1366×768p@60/60 (RB)  
1400×1050p@60/60 (RB)  
1440×900p@60/60 (RB)/75  
1600×900p@60 (RB)  
1600×1200p@50/60/65/70/75/85  
1680×1050p@60/60 (RB)  
1920×1080p@23/24/25/29/30/50/59/60  
1920×1080i@50/59/60  
1920×1200p@60 (RB)  

7
Resolution/Timing (Hz)
HDMI
Input
HDMI
Output
2048×1080p@23/24/25/29/30/50/59/60  
3840×2160p@50/59/60 (4:2:0) 
3840×2160p@23/24/25/29/30 (4:4:4)  
4096×2160p@50/59/60 (4:2:0)  
4096×2160p@23/24/25/29/30 (4:4:4)  
8.3 Cable Specications
HDMI Cable Length
1080p 4K
8-bit 12-bit 8-bit
Input 15m 10m 5m
Output 15m 10m 5m

8
9. ACRONYMS
ACRONYM COMPLETE TERM
CEC Consumer Electronics Control
DVI Digital Visual Interface
EDID Extended Display Identication Data
HD High-Denition
HDCP High-bandwidth Digital Content Protection
HDMI High-Denition Multimedia Interface
HDTV High-Denition Television
LPCM Linear Pulse-Code Modulation
UHD Ultra-High-Denition
UHDTV Ultra-High-Denition Television

CYPRESS TECHNOLOGY CO., LTD.
www.cypress.com.tw