CYP AU-D3-192 User manual

AU-D3-192
Coaxial/Optical to Left/Right
Stereo Audio Converter - 192kHz
OPERATION MANUAL

1. Introduction 1
2. Features 1
3. Operation Controls and Functions 2
3.1 Front Panel Diagram 2
3.2 Rear Panel Diagram 2
4. Connection Diagram 3
5. 3
Table of Contents

1. Introduction
2. Features
•Supports digital audio signal (Coaxial/Optical) input and analogue audio signal
(L/R) output.
•
•Supports uncompressed digital stereo audio input.
•Compact size and easy to install.
Page 1
The AU-D3-192 is designed to convert either Coaxial or Optical signals from a
digital stereo signal to analogue stereo audio. With an advanced 192kHz
sampling rate, this unit is particularly useful for enhancing sound reproduction
when connecting digital sources to analogue amplifiers.
Supports SPDIF 192K/24 bits of data for the left and right channel.
•

Page 2
3. Operation Controls and Functions
3.1 Front Panel
1. Input Selection:
Use this switch to select input from Coaxial or Optical input ports.
2. Power:
Plug the power supply into AU-D3 unit and connect the adaptor to AC wall outlet.
Front Panel
21
DC 5V
OPTICAL
COAX
2
OUT RL
1
COAX OPTICALIN
3.2 Rear Panel
1 . Coaxial/Optical input: Connect coaxial/optical inputs to the coaxial/optical
audio equipments, such as DVD player, etc.
2 . L/R output: Connect R/L stereo analogue audio output to the display audio
input or audio equipment.

Page 3
4. Connection and Installation
Input Ports 1 x Coaxial RCA jack and 1 x Optical (Toslink) port
Output Ports 1 x Left & Right Stereo RCA ports
Power Supply
Dimensions (mm) 42(W) x 40.5(D) x 22(H)
Weight (g) 25
Chassis Material Plastic
Colour Black
Operating Temp. Operating from 0°C ~ 40°C