CYP CV-401H User manual

CV-401H
HDMI to Video Scan Converter
OPERATIONS MANUAL

DISCLAIMERS
The information in this manual has been carefully checked and is
believed to be accurate. CYP (UK) Ltd assumes no responsibility for any
infringements of patents or other rights of third parties which may result
from its use.
CYP (UK) Ltd assumes no responsibility for any inaccuracies that may be
contained in this document. CYP (UK) Ltd also makes no commitment to
update or to keep current the information contained in this document.
CYP (UK) Ltd reserves the right to make improvements to this document
and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted, transcribed,
stored in a retrieval system, or any of its part translated into any language
or computer le, in any form or by any means—electronic, mechanical,
magnetic, optical, chemical, manual, or otherwise—without express
written permission and consent from CYP (UK) Ltd.
© Copyright 2011 by CYP (UK) Ltd.
All Rights Reserved.
Version 1.1 August 2011
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.

SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or operate
this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of re,
electrical shock and injury to persons.
• To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts inside
the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU if
it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sucient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE SUMMARY OF CHANGE
VR0 25/04/2011 Preliminary Release
VS1 25/04/2012 Updated format/diagrams

CONTENTS
1. Introduction ...........................................6
2. Applications ...........................................6
3. Package Contents ..................................6
4. System Requirements ...........................6
5. Features ..................................................7
6. Operation Controls and Functions .......8
6.1 Top Panel ...................................................... 8
6.2 Left Panel ...................................................... 9
6.3 Right Panel ................................................... 9
6.3 OSD Menu ..................................................10
6.4 Support Input Timing ............................12
7. Connection Diagram .......................... 13
8. Specications ...................................... 14
9. Acronyms ............................................. 15

6
1. INTRODUCTION
The CV-401H is a HDMI to Video Scan Converter is designed to convert
digital signal from HDMI source to an analogue Composite Video (CVBS)
signal for use in an NTSC or PAL system, with additional L/R stereo audio
output. This device provides a convenient conversion that allows the
user to convert high denition video to standard resolution (480i or 576i)
format, and then store on DVR or VCR machine.
The device is HDMI 1.2 & DVI 1.0 compliant and features a simple On
Screen Display (OSD) menu, motion adaptive 3-D de-interlacing, 3D noise
reduction, frame rate conversion, and adaptive contrast enhancement.
2. APPLICATIONS
• Convert HDMI video signal to a NTSC or PAL signal
• Convert digital audio signal to analog audio signal
3. PACKAGE CONTENTS
• HDMI to Video Scan Converter
• 5 V/1 A DC Power Adaptor
• Operation Manual
4. SYSTEM REQUIREMENTS
Video source equipment such as a Digital Camera or PC with HDMI output
port, display (TV or monitor) with composite video & L/R audio input
ports, HDMI cable and RCA cables.

7
5. FEATURES
• HDMI 1.2 and DVI 1.0 compliant
• Converts video signal from HDMI source to NTSC or PAL signal
• Converts digital audio from HDMI source to analog stereo audio
• Accepts a wide range of HDTV input resolutions from 480i to 1080p, and
PC resolutions from VGA@60Hz to WUXGA@60Hz (RB)
• Output picture can be of Underscan or Overscan aspect ratio
• Motion adaptive 3-D de-interlacing with pixel-by-pixel motion adaptive
interpolation
• 3D noise reduction in both temporal and spatial domain
• Adaptive contrast enhancement
Note: This device does NOT convert HDCP. When receiving content that has
HDCP encryption there will be no video output.

8
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Top Panel
1 2
1 NTSC/PAL MENU (Hold): Press this button to bring up the On-Screen
Display (OSD) which will display the input timing and the output TV
format information.
When the OSD is displayed, press the button again to switch the
output TV system from NTSC to PAL and from PAL to NTSC.
Press this button for 3 seconds the OSD will bring up the selection
menu. Press it sequentially to select the required setting.
2 Power LED: This LED will illuminate in RED when the unit is connected
to the power supply.

9
6.2 Left Panel
1 2
1
HDMI IN: Connect the HDMI IN port to the HDMI output port of your
source equipment such as a DVD player or Set-top box. You can also
use an HDMI to DVI cable to connect to the DVI output of your PC.
2
DC 5V: Plug the 5 V DC power supply into the unit and connect the
adaptor to AC wall outlet.
6.3 Right Panel
12
1
OUTPUT L/R: Connect the L/R stereo output ports to the input ports
of active speakers or TV/monitor with corresponding audio inputs.
2
OUTPUT VIDEO: Connect the VIDEO output port to the composite
video input port of your display such as HDTV or monitor.

10
6.3 OSD Menu
IN 1280×960 @60 (Input Timing) Press the Menu button
once to bring up the OSD
and display the input (IN) &
Output (OUT) information.
OUT NTSC (Output TV System)
NTSC Press the Menu button
for 3 seconds to bring
up the OSD then press
it repeatedly to move
the OSD cursor to the
desired selection. Once
the selection is made, if
no button is pressed for a
few seconds, the display
on the OSD will disappear
and the display will output
the selected display
mode.
PAL
Underscan 1
Underscan 2
Overscan
Aspect Adj
Full Screen
Letterbox
Pan & Scan
Auto TV 4:3
Auto TV 16:9
Below is the example of the scan selection result.
4:3
Source TV Underscan1 Underscan2 Overscan

11
Aspect Adjustment: There are total of 5 dierent aspect ratio
adjustments: Full Screen, Letterbox, Pan & Scan and Auto TV 4:3 & Auto TV
16:9.
Full Screen: To allow the image to ll the screen of the TV.
Letterbox: To t a 16:9 formatted video signal on a 4:3 display. Horizontal
Black bars will be displayed above and below the image
Pan & Scan: To t a 4:3 formatted video signal on a 16:9 display. Vertical
black bars will be displayed at both sides of the the image.
Auto TV 4:3: The device will detect the input source aspect ratio of 4:3 or
16:9 and make the automatically make the adjustment to 4:3.
Auto TV 16:9: The device will detect the input source aspect ratio of 16:9
or 4:3 and automatically make the adjustment to 16:9.
Blow is the sample chart of the selection result:
Source TV Aspect
Adjust
Full
Screen
Letterbox Pan&Scan Auto TV
4:3
Auto TV
16:9
4:3
4:3 × × ×
16:9 × ×
16:9
4:3 × ×
16:9 ×××

12
6.4 Support Input Timing
HD Timing
480i/480p 60
576i/576p 50
720p 50,60
1080i 50,60
1080p 50,60
PC Timing
640×480 60,72,75,85
720×400 70
800×600 56,60,72,75,85
1024×768 60,70,75,85
1152×864 70,75,85
1280×720 60
1280×768 60RB,60
1280×800 60RB,60
1280×960 60
1280×1024 60
1366×768 60RB,60
1400×1050 60RB,60
1440×900 60RB,60
1600×1200 60
1680×1050 60RB,60
1920×1200 60RB
Note: When the input timing is not supported, the OSD will display “IN Not
Support”.

13
7. CONNECTION DIAGRAM
HDMI Source
DVD or Blu-ray Player
Power
Supply
TV
CVBS
(Composite)
Cable
Stereo
Analogue
Audio
HDMI
Output

14
8. SPECIFICATIONS
Input Port 1×HDMI
Output Ports 1×CVBS (Composite Video)
1×L/R Stereo RCA Jacks (Analog Audio)
HDMI Input Audio LPCM 2Ch, 48kHz
Output Video NTSC/PAL
Output Audio Stereo L/R
ESD Protection Human body
model:
±8 kV (air-gap
discharge)
±6 kV (contact
discharge)
Power Supply 5 V DC/1 A linear power adaptor (US/
EU standards, CE/FCC/UL certied) or
5V/1.2A switching power adaptor (with
universal plug, CE/FCC/UL certied)
Dimensions 114 mm (W)×65 mm (D)×26 mm (H)
Weight 120 g
Chassis Material Plastic
Silkscreen Color White
Operating Temperature 0 °C~40 °C/32 °F~104 °F
Storage Temperature −20 °C~60 °C/−4 °F~140 °F
Power Consumption 4.7 W
Relative Humidity 20~90 % RH (non-condensing)

15
9. ACRONYMS
ACRONYM COMPLETE TERM
CAT5e Category 5 Cable
CAT6 Category 6 cable
CEC Consumer Electronics Control
DVI Digital Visual Interface
HDCP High-bandwidth Digital content protection
HDMI High Denition Multimedia Interface
IR Infrared

CYP (UK) Ltd., Unit 7, Shepperton Business Park, Govett Avenue, Shepperton,
Middlesex, TW17 8BA
Tel: [phone] | Fax: [phone]
Email: [email protected]
www.cypeurope.com