CYP SY-P291 User manual

SY-P291 PC/HD to
PC/HD Scaler Box
Operation Manual
SY-P291
1.Introduction
This Scaler Box is designed to upscale PC/HD input sources to PC/HD output of
wide-range PC/HD resolutions; the resolution is up to WUXGA/1080p. This unit
has a comprehensive OSD menu that allows user to select a variety of output
resolutions and adjust for best picture quality.
2. Features
 Scales any PC/HD resolutions to PC (VGA ~ WUXGA)/HD (480i ~ 1080p)
resolutions.
 Provides output picture adjustment on contrast, brightness, hue, saturation,
sharpness, RGB (color tone) level and aspect ratio size.
 Supports high resolution output:
PC: VGA, SVGA, XGA, SXGA, UXGA, WXGA, WSXGA, WUXGA.
SD/HD: 480i, 576i, 480p, 576p, 720p, 1080i and 1080p.
 Supports YPbPr/RGBHV input/output.
1 Power: Plug the 5VDC power supply into the unit and connect the
adaptor to AC wall outlet.
2 PC/HD Output: Connect the PC output D-Sub (15-pin) port to the D-Sub
input port of your display.
3 Menu Button: Press the MENU button to bring up OSD operation menu.
(See section “4. OSD Operation” for reference.)
4 +/- Button:
1 On the first tier of OSD menu, use + and – buttons to move up/down
the highlight item for selection.
2 Once the desired option is selected, use + and – buttons to toggle
between setting values.
Note: Reset: Press [MENU] and then [ - ] to switch to 480p mode.
Press [MENU] and the [ + ] to switch to XGA mode.
1 2 3 4
DC 5V
PC / HD
OUTPUT MENU +
-
PC / HD PC / HD
3.2 Rear Panel

SY-P291 PC/HD to
PC/HD Scaler Box
Operation Manual
SY-P291
1.Introduction
This Scaler Box is designed to upscale PC/HD input sources to PC/HD output of
wide-range PC/HD resolutions; the resolution is up to WUXGA/1080p. This unit
has a comprehensive OSD menu that allows user to select a variety of output
resolutions and adjust for best picture quality.
2. Features
 Scales any PC/HD resolutions to PC (VGA ~ WUXGA)/HD (480i ~ 1080p)
resolutions.
 Provides output picture adjustment on contrast, brightness, hue, saturation,
sharpness, RGB (color tone) level and aspect ratio size.
 Supports high resolution output:
PC: VGA, SVGA, XGA, SXGA, UXGA, WXGA, WSXGA, WUXGA.
SD/HD: 480i, 576i, 480p, 576p, 720p, 1080i and 1080p.
 Supports YPbPr/RGBHV input/output.
1 Power: Plug the 5VDC power supply into the unit and connect the
adaptor to AC wall outlet.
2 PC/HD Output: Connect the PC output D-Sub (15-pin) port to the D-Sub
input port of your display.
3 Menu Button: Press the MENU button to bring up OSD operation menu.
(See section “4. OSD Operation” for reference.)
4 +/- Button:
1 On the first tier of OSD menu, use + and – buttons to move up/down
the highlight item for selection.
2 Once the desired option is selected, use + and – buttons to toggle
between setting values.
Note: Reset: Press [MENU] and then [ - ] to switch to 480p mode.
Press [MENU] and the [ + ] to switch to XGA mode.
1 2 3 4
DC 5V
PC / HD
OUTPUT MENU +
-
PC / HD PC / HD
3.2 Rear Panel
1. Introduction................................................................................
2. Features......................................................................................
3. Operation Controls and Functions..........................................
3.1 Front Panel...........................................................................
3.2 Rear Panel............................................................................
4. OSD Operation...........................................................................
5. Connection and Installation.....................................................
6. Specifications.............................................................................
7. Support Resolution.....................................................................
TABLE OF CONTENTS
1
1
1
2
2
3
4
4
4

SY-P291 PC/HD to
PC/HD Scaler Box
Operation Manual
SY-P291
1.Introduction
This Scaler Box is designed to upscale PC/HD input sources to PC/HD output of
wide-range PC/HD resolutions; the resolution is up to WUXGA/1080p. This unit
has a comprehensive OSD menu that allows user to select a variety of output
resolutions and adjust for best picture quality.
2. Features
 Scales any PC/HD resolutions to PC (VGA ~ WUXGA)/HD (480i ~ 1080p)
resolutions.
 Provides output picture adjustment on contrast, brightness, hue, saturation,
sharpness, RGB (color tone) level and aspect ratio size.
 Supports high resolution output:
PC: VGA, SVGA, XGA, SXGA, UXGA, WXGA, WSXGA, WUXGA.
SD/HD: 480i, 576i, 480p, 576p, 720p, 1080i and 1080p.
 Supports YPbPr/RGBHV input/output.
1

1 Power: Plug the 5VDC power supply into the unit and connect the
adaptor to AC wall outlet.
2 PC/HD Output: Connect the PC output D-Sub (15-pin) port to the D-Sub
input port of your display.
3 Menu Button: Press the MENU button to bring up OSD operation menu.
(See section “4. OSD Operation” for reference.)
4 +/- Button:
1 On the first tier of OSD menu, use + and – buttons to move up/down
the highlight item for selection.
2 Once the desired option is selected, use + and – buttons to toggle
between setting values.
Note: Outside of the OSD menu, press [-] button to activate the Auto
Adjust function. The screen will show Auto Adjust.
Press [MENU] and then [ - ] to switch to 480p mode.
Press [MENU] and the [ + ] to switch to XGA mode.
1 2 3 4
DC 5V
PC / HD
OUTPUT MENU +
-
PC / HD PC / HD
3.2 Rear Panel
2
1 PC/HD Bypass: Bypass the PC/HD input signal.
2 Input: Connect the PC input D-Sub (15-pin) port to the D-Sub output port
of your source equipment such like PC.
3.1 Front Panel
1 2
PC / HD
BYPASS
PC / HD
IN
3. Operation Controls and Functions

4. OSD Operation
3
Adjustment
CONTRAST - 0 ~ 100 of Contrast Level
BRIGHTNESS - 0 ~ 100 of Brightness Level
- HUE 0 ~ 100 of Hue Level
- SATURATION 0 ~ 100 of Saturation Level
- SHARPNESS 0 ~ 100 of Sharpness Level
FINETUNE
- EXIT
- RED 0 ~ 100 of Red Color Level
- GREEN 0 ~ 100 of Green Color Level
- BLUE 0 ~ 100 of Blue Color Level
COLOR
- EXIT
SIZE -
OUTPUT -
- HPOSITION 0 ~ 100 of OSD Horizontal Position
- VPOSITION 0 ~ 100 of OSD Vertical Position
- TIMER 0 ~ 100 of OSD Existing Time (sec.)
- BACKGROUND 0 ~ 100 of OSD Transparent Level
OSD
- EXIT
INFORMATION -
Mirror
FULL / OVERSCAN / UNDERSCAN /
LETTERBOX / PANSCAN
1st Tier Option 2
nd
Tier Option
Back to 1st Tier
Back
to 1st Tier
Back to 1st Tier
Back
to 1st Tier
SOURCE (Input Interface)
INPUT (Input Resolution)
OUTPUT (Output Resolution)
VERSION (Firmware Version)
NATIVE / VGA / SVGA / XGA /
SXGA /UXGA / WXGA / WSXGA /
WUXGA / 480i / 480p /720p@60Hz
/ 1080i@60Hz /
1080p@60Hz / 576i / 576p /
720p@50Hz / 1080i@50Hz /
1080p@50Hz
EXIT - Close OSD Menu
ON/OFF
Note: Finetune function works differently under component and
VGA input therefore, Hue, Saturation and Sharpness are only
adjustable when input signal is component.
- PHASE (PC)
0 ~ 100 of Phase Level
- CLOCK (PC)
0 ~ 100 of Clock Level
- H-POSITION (PC)
0 ~ 100 of H-Position Level
- V-POSITION (PC)
0 ~ 100 of V-Position Level
- EXIT (PC)

5. Connection and Installation
4
PC MONITOR
DVD LCD TV
or
or
6. Specifications
Input Ports
Output Port
Power Supply
Dimensions (mm)
Weight(g)
Chassis Material
Silkscreen Color
Operating Temperature
1 x PC
1 x PC
5V/2.6A DC (US/EU standards, CE/FCC/UL certified)
157(D) x 102(W) x 25(H)
332
Aluminum
Black
0°C ~ 40°C
7. Support Resolution
480I/576I (NTSC/PAL)
480P/576P
720P@(50/60)
1080I@(50/60)
1080P@(50/60)
VGA@(60/72/75/85)
SVGA@(56/60/72/75/85)
XGA@(60/70/75/85)
SXGA@(60/75/85)
UXGA@60
WXGA@60(1280x800)
WSXGA@60(1680x1050)
WUXGA@60(1920x1200)
PC INPUTInput/Output
Resolution
PC OUTPUT
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V
V@60
V@60
V@60
V@60
V
V
V
V
PC/HD PC/HD
Note: 1920 x 1200 = Reduced Blanking WUXGA

SY-P291 PC/HD to
PC/HD Scaler Box
Operation Manual
SY-P291
1.Introduction
This Scaler Box is designed to upscale PC/HD input sources to PC/HD output of
wide-range PC/HD resolutions; the resolution is up to WUXGA/1080p. This unit
has a comprehensive OSD menu that allows user to select a variety of output
resolutions and adjust for best picture quality.
2. Features
 Scales any PC/HD resolutions to PC (VGA ~ WUXGA)/HD (480i ~ 1080p)
resolutions.
 Provides output picture adjustment on contrast, brightness, hue, saturation,
sharpness, RGB (color tone) level and aspect ratio size.
 Supports high resolution output:
PC: VGA, SVGA, XGA, SXGA, UXGA, WXGA, WSXGA, WUXGA.
SD/HD: 480i, 576i, 480p, 576p, 720p, 1080i and 1080p.
 Supports YPbPr/RGBHV input/output.
1 Power: Plug the 5VDC power supply into the unit and connect the
adaptor to AC wall outlet.
2 PC/HD Output: Connect the PC output D-Sub (15-pin) port to the D-Sub
input port of your display.
3 Menu Button: Press the MENU button to bring up OSD operation menu.
(See section “4. OSD Operation” for reference.)
4 +/- Button:
1 On the first tier of OSD menu, use + and – buttons to move up/down
the highlight item for selection.
2 Once the desired option is selected, use + and – buttons to toggle
between setting values.
Note: Reset: Press [MENU] and then [ - ] to switch to 480p mode.
Press [MENU] and the [ + ] to switch to XGA mode.
1 2 3 4
DC 5V
PC / HD
OUTPUT MENU +
-
PC / HD PC / HD
3.2 Rear Panel
5

v1.01