CYP CP-300VD Installation manual

CP-300VD
VGA to DVI Scaler
Operation Manual
Operation Manual

DISCLAIMERS
The information in this manual has been carefully checked and
is believed to be accurate. Cypress Technology assumes no
responsibility for any infringements of patents or other rights of third
parties which may result from its use.
Cypress Technology assumes no responsibility for any inaccuracies
that may be contained in this document. Cypress also makes no
commitment to update or to keep current the information contained
in this document.
Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer le, in any form or by any means—
electronic, mechanical, magnetic, optical, chemical, manual, or
otherwise—without express written permission and consent from
Cypress Technology.
© Copyright 2011 by Cypress Technology.
All Rights Reserved.
Version 1.1 August 2011
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.

SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of re,
electrical shock and injury to persons.
• To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU
if it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufcient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE DD/MM/YY SUMMARY OF CHANGE
VR0 13/04/11 Preliminary Release
VR1 25/05/12 Add Output timings
VS1 25/01/13 Updated format/diagrams

CONTENTS
1. Introduction............................................ 1
2. Applications........................................... 1
3. Package Contents ................................ 1
4. System Requirements............................ 1
5. Features.................................................. 1
6. Operation Controls and Functions....... 2
6.1 Top Panel ..........................................2
6.2 Left Panel ..........................................3
6.3 Right Panel........................................3
6.4 OSD Table .........................................4
7. Connection Diagram ............................ 5
8. Specications ........................................ 6
9. Acronyms ............................................... 6

1
1. INTRODUCTION
The VGA to DVI Scaler is designed to convert a VGA signal to DVI
so that it can be displayed on a DVI monitor without loss of image
quality. It can upscale VGA input sources to DVI output for a wide-
range of PC resolutions, from VGA to WUXGA. The Scaler has a variety
of output resolutions and adjustment for the best picture quality. Also,
the built-in OSD function makes it easy for the user to view or select
the desired resolution.
2. APPLICATIONS
• Upscale or downscale PC resolutions
• Convert an analog RGB signal into digital RGB DVI signal
• Integrate into a wider digital system
3. PACKAGE CONTENTS
• 1×VGA to DVI Scaler
• 1×5V DC Power Adaptor
• Operation Manual
4. SYSTEM REQUIREMENTS
Source equipment such as PC or laptop and output to DVI display
with DVI connection cable.
5. FEATURES
• Supports PC resolution bypass from VGA to WUXGA@60 Hz (RB)
• Supports bypass, manual and TV native modes
• Supports auto-detection and hot plugging

2
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Top Panel
DVI Out
VGA In
Timing
VGA to DVI Scaler
DC 5V
1 2
1
Timing Button
Press this button to switch the EDID setting for bypass, manual or
native mode. The OSD will display both input and output resolutions
on the top left of the output display. Please refer to Section 6.4 for
details.
2
Power LED
This LED will illuminate in green when the unit is connected to a
power supply.

3
6.2 Left Panel
1 2
1
VGA In
Connect to a source device such as a PC or laptop with a VGA
cable.
2
DC 5V
Connect the 5V DC power supply into the unit and plug the
adaptor into an AC wall outlet.
6.3 Right Panel
1
1
DVI Out
Connect to a DVI display, monitor or larger video system.

4
6.4 OSD Table
Input
Resolution
Input Refresh
Rate (Hz)
Output Refresh Rate (Hz)
Manual
Mode
Native
Mode
Bypass
Mode
640×350 85 - - 85
640×400 85 - - 85
640×480 60, 72, 75, 85 60 60 60, 72, 75, 85
800×600 56, 60, 72, 75, 85 - - 56, 60, 72, 75, 85
848×480 60 - - 60
1024×768 60, 70, 75, 85 - - 60, 70, 75, 85
1152×864 75 - - 75
1280×720 60 60 60 60
1280×768 60, 75, 85 - - 60, 75, 85
1280×800 60, 75, 85 60 60 60, 75, 85
1280×960 60, 85 - - 60, 85
1280×1024 60, 75, 85 - - 60, 75, 85
1360×768 60 60 60 60
1366×768 60 60 60 60
1400×1050 60 - - 60
1440×900 60, 75, 85 - - 60, 75, 85
1600×1200 60 - - 60
1680×1050 60 - - 60
1920×1080 60 60 60 60
1920×1200 (RB) 60 60 60 60
Note:
• 1366×768@60 & 1360×768@60 will output 1366×768@60;
1400×1050@60 & 1680×1050@60 will output 1400×1050@60.
• Both Manual & Native modes will only output an image when the input
source supports a 60Hz refresh rate.
• When in Manual & Native mode’s non-supported resolutions the output will
automatically switch to bypass mode in order to ensure that an image is
displayed.

5
7. CONNECTION DIAGRAM
PC or Laptop
VGA Input
(15-pin D-Sub)
Power
Supply
DVI Output
DVI Monitor

6
8. SPECIFICATIONS
Input Port 1×VGA
Output Port 1×DVI
Output Timings 640×480, 1280×720, 1280×800, 1366×768,
1920×1080, 1920×1200RB
Power Supply 5 V DC / 1 A linear power adaptor (US/EU
standards, CE/FCC/UL certied)
ESD Protection Human body model:
± 8kV (air-gap discharge)
± 6kV (contact discharge)
Dimensions 110 mm (W)×62 mm (D)×20 mm (H)
Weight 76 g
Chassis Material Plastic
Silkscreen Color Black
Operating Temperature 0 ˚C~40 ˚C/32 ˚F~104 ˚F
Storage Temperature −20 ˚C~60 ˚C/−4 ˚F~140 ˚F
Relative Humidity 20~90 % RH (non-condensing)
Power Consumption 2.8 W
9. ACRONYMS
ACRONYM COMPLETE TERM
DVI Digital Visual Interface
EDID Extended Display Identication Data
OSD On Screen Display
VGA Video Graphics Array

Home page: http://www.cypress.com.tw
CYPRESS TECHNOLOGY CO., LTD