CYP CS-802D User manual

CS-802D
Ultra High Resolution Scaler
Operation Manual
Operation Manual

DISCLAIMERS
The information in this manual has been carefully checked and
is believed to be accurate. Cypress Technology assumes no
responsibility for any infringements of patents or other rights of third
parties which may result from its use.
Cypress Technology assumes no responsibility for any inaccuracies
that may be contained in this document. Cypress also makes no
commitment to update or to keep current the information contained
in this document.
Cypress Technology reserves the right to make improvements to this
document and/or product at any time and without notice.
COPYRIGHT NOTICE
No part of this document may be reproduced, transmitted,
transcribed, stored in a retrieval system, or any of its part translated
into any language or computer le, in any form or by any means—
electronic, mechanical, magnetic, optical, chemical, manual, or
otherwise—without express written permission and consent from
Cypress Technology.
© Copyright 2012 by Cypress Technology.
All Rights Reserved.
Version VR1.0 January 2012
TRADEMARK ACKNOWLEDGMENTS
All products or service names mentioned in this document may be
trademarks of the companies with which they are associated.

SAFETY PRECAUTIONS
Please read all instructions before attempting to unpack, install or
operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install this
equipment:
• Always follow basic safety precautions to reduce the risk of re,
electrical shock and injury to persons.
• To prevent re or shock hazard, do not expose the unit to rain,
moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any
openings or empty slots in the unit, as you may damage parts
inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU
if it is damaged.
• Do not allow anything to rest on the power cabling or allow any
weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or
openings in the unit housing that provide ventilation and allow for
sufcient space for air to circulate around the unit.
REVISION HISTORY
VERSION NO. DATE DD/MM/YY SUMMARY OF CHANGE
RDV1 20/11/12 Preliminary Release

CONTENTS
1. Introduction............................................ 1
2. Applications........................................... 1
3. Package Contents ................................ 1
4. System Requirements............................ 1
5. Features.................................................. 1
6. Operation Controls and Functions....... 2
6.1 Front Panel ........................................2
6.2 Rear Panel.........................................4
7.OSD Menu and Function List.................. 5
8. Remote Control...................................... 6
8.1 RS-232 Protocols ...............................7
8.2 RS-232 Commands...........................8
9. Connection and Installation............... 10
10. Specications .................................... 11
10.1 PC, HDMI, DP Input Timing ..........12
10.2 Output Resolution ........................14
11. Acronyms ........................................... 15

1
1. INTRODUCTION
This Ultra Hight Resolution Scaler with Dual-Link DVI, Mini-DisplayPort
and PC/Component inputs to its HDMI output and the associated
audio signal processed synchronously. Accepting most of PC/Graphic
signal and scaling features can be handled easily through on-panel
buttons, IR remote control, or RS-232 protocol.
2. APPLICATIONS
• Scale Dual-Link DVI, Mini-DisplayPort and PC/Component inputs to
HDMI output
3. PACKAGE CONTENTS
• Ultra High Resolution Scaler
• VGA to 3RCA converter cable
• 5V/2.6A DC power adaptor
• Operation Manual
4. SYSTEM REQUIREMENTS
• Input Dual-Link DVI/Mini-DisplayPort/PC sources and output with
HDMI display.
5. FEATURES
• Supports Component input timing up to 1080p@50/60Hz, Dual-Link
DVI &Mini-DisplayPort up to 2560 x 1600@60HzRB and PC up to 1920
x 1200@60/75Hz
• Supports digital and analog audio bidirectional conversion,
extraction and insertion for the audio signals from individual
• inputs Supports component input when connected VGA to 3RCA
adaptor

2
6. OPERATION CONTROLS AND FUNCTIONS
6.1 Front Panel
XGA
720P
ENTER
MENU/
OPTICAL
OUT
IN
AUDIO HDMI OUT
DC 5V
POWER
OPTICAL AUDIO
1
6 7 8 9 10
2 3 4 5
1MENU/ENTER
Press this button to ENTER the OSD menu. Press again to conrm the
selection. Press it together with - button to switch output to720p or
with + button to swtich output to XGA instantly.
2-/IN
a. “-“: When in OSD page, sequentially press this button to move
down the OSD selection.
b. “IN”: Press this button to quick enter the input port selection.
3+/OUT
a. “+”: When in OSD page, sequentially press this button to move
up the OSD selection.
b. “OUT”: Press this button to quick enter the output resolution
selection.
4OPTICAL OUT
This slot is where you connect the amplier with OPTICAL cable
and from amplier to speaker.

3
5AUDIO L/R OUT
This slot is where you connect the speaker or amplier with audio
phone jack to the display.
6OPTICAL IN
This slot is where you connect the input OPTICAL audio source.
7AUDIO L/R IN
This slot is where you connect the L/R input audio source.
8HDMI OUT
This slot is where you connect the HDMI display with HDMI cable.
9IR sensor
10 DC 5V
Plug the 5V DC power supply into the unit and connect the
adaptor to AC wall outlet. Once the power supplyis connected
the power LED will illuminate

4
6.2 Rear Panel
RS232
SERVICEMDP
Dual-Link DVI PC/COMP
IN
1
2 3 4 5
1RS232
This slot is to connect with D-Sub 9pin cable from the PC/NB device
for RS-232 control.
2SERVICE
This slot is to connect with USB cable for manufacturers’ rmware
update only.
3Mini-DisplayPort IN
This slot is where you connect the MiniDisplayPort source output for
DisplayPort signal sending.
4Dual-Link DVI IN
This slot is are where you connect the Dual-Link DVI sources output
for Dual-Link DVI signal sending.
5PC/COMP IN
This slot is where you connect the PC/NB or DVD/Set-Top Box
source equipment with D-Sub 15-pin cable for PC source signal
input or with D-Sub 15-pin to 3 RCA adaptor for component signal
input.

5
7.OSD MENU AND FUNCTION LIST
Main Menu 2nd Layer
Input Video PC
COMP
DVI
MDP
Exit
Input Audio AUDIO
Optical
MDP
Mute
Exit
Output Resolution 720x480P
1280x720P
1920x1080P
640x480
800x600
1024x768
1280x1024
1600x1200
1920x1200RB
By Native
Exit

6
Main Menu 2nd Layer 3rd Layer
Misc. Setup EDID Mode Internal / External / Exit
Info. OSD Mode Off / On / Exit
About CS-802D FW Ver.
Factory Reset System Reset
Exit
Exit
8. REMOTE CONTROL
1Power
Press to select DV MDP/PC/
2VIDEO IN
Press to select DV MDP/PC/
Component input source.
3AUDIO IN
Press to select AUDIO/
OPTICAL/MDP input audio or
MUTE the system.
4EXIT
Press the EXIT the OSD
selection.
5MENU
Press this button to ENTER the
OSD menu.
6ENTER
Press to conrm the selection.
7INFO
To show input and output resolution information.
8OUTPUT
Press to show the output resolution table.
MDP
MENU
OUTPUTINFO
DVI
PC
AUDIO
MUTE
EXIT
NATIVE
MDP
COMP
OPTICAL
ENTER
CR-123
AUDIO IN
VIDEO IN
2
3
5
8
10
9
4
1
7
6

7
9 ▲/▼
Press up/down buttons to select OSD selection.
10 Native
Press to switch to Native resolution.
8.1 RS-232 Protocols
RS-232 modem cable.
Pins denition of modem cable
CS-802D Remote Controller
PIN Denition PIN Denition
1 NC 1 NC
2TxD 2RxD
3RxD →3TxD
4 NC 4 NC
5 GND ←5 GND
6 NC 6 NC
7 NC 7 NC
8 NC 8 NC
9NC 9NC
Baud Rate: 19200 bps
Data Bit: 8 bits
Parity: None
Stop Bit: 1 bit
Flow Control: None

8
8.2 RS-232 Commands
User Command Code Description
POWER ? Power Status
POWER ON Power On
POWER OFF Power Off
VIDEO ? Video Input Source
DVI Video Input in DVI
MDP Video Input in Mini-DisplayPort
PC Video Input in PC
COMP Video Input in Component
AUDIO ? Audio Input Source
AUDIO Audio Input in AUDIO
OPTICAL Audio Input in OPTICAL
MDPA Audio Input in MDP
MUTE? Mute Status
MUTE ON Mute On
MUTE OFF Mute Off
INFO ? Info.OSD Status
INFO ON Info.OSD On
INFO OFF Info.OSD Off
INFO DISPLAY Info.OSD On/Off

9
OUTPUT ? Output Status
480P Output in 480P
720P Output in 720P
1080P Output in 1080P
VGA Output in VGA(640x480)
SVGA Output in SVGA(800x600)
XGA Output in XGA(1024x768)
SXGA Output in SXGA(1280x1024)
UXGA Output in UXGA(1600x1200)
WUXGA Output in WUXGA(1920x1200)
NATIVE Output by Native
EDID ? EDID Status
EDID INT EDID By Internal
EDID EXT EDID By External
FEEDBACK ? Key Feedback Status
FEEDBACK ON Key Feedback Enable
FEEDBACK OFF Key Feedback Disable
STATE ? Video Input Signal Status
VERSION ? Firmware Version
DEFAULT Reset to Factory Default
About ? About CS-802D
Note: Any commands will not be executed unless followed by a
carriage return. Commands are not case-sensitive.

10
9. CONNECTION AND INSTALLATION
RS232
SERVICE MDP
Dual-Link DVIPC/COMP
IN
XGA
720P
ENTER
MENU/
OPTICAL
OUT
IN
AUDIO HDMI OUT
DC 5V
POWER
OPTICAL AUDIO
OR
OR
OR
OR
PC PC
NB
VGA
Optical HDMI
Optical 3.5Ø audio
D-Sub15pin
MDP
MAC PC NB
PC NB
Amplier
HD TV
Dell PC NB

11
10. SPECIFICATIONS
DP Input Frequency
Bandwidth
2.7Gbps & 1.62Gbps/Lane
Input Port 1 x Dual-Link DVI (Female type),
1 x Mini-DisplayPort,
1 x PC/COMP
Audio Input Port 1 x L/R, 1xOptical
Output Port 1 x HDMI, 1 x L/R, 1 x Optical
Power Supply 5V DC/ 2.6A (US/EU standards, CE/FCC/
UL certied)
ESD Protection Human body model:
±8 kV (air-gap discharge)
±4 kV (contact discharge)
Dimensions (mm) 141(W) x 179(D) x 38(H)
Weight(g) 700
Chassis Material Aluminum
Silkscreen Color Black
Operating Temperature 0˚C ~ 40˚C / 32 ˚F ~ 104 ˚F
Storage Temperature -20˚C ~ 60˚C / -4 ˚F ~ 140 ˚F
Relative Humidity 20 ~ 90% RH (non-condensing)
Power Consumption 9W

12
10.1 PC, HDMI, DP Input Timing
Input Resolution PC DVI MDP
COMP
Input
Resolution
640*350@85 ˇ ˇ ˇ
640*400@85 ˇ ˇ ˇ
720*400@85 ˇ ˇ ˇ
VGA640*480@60/72/
75/85
ˇ ˇ ˇ
SVGA800*600@56/60/
72/75/85/120R
ˇ ˇ ˇ
848*480@60Hz ˇ ˇ ˇ
XGA1024*768@43i/60/
75/85/120R
ˇ ˇ
XGA+1152*864@75 ˇ ˇ ˇ
1280*720@60 ˇ ˇ ˇ
1280*768@60R/
60/75/85/120R
ˇ ˇ ˇ
1280*800@60R/
60/75/85/120R
ˇ ˇ ˇ
1280*960@60/85/120R ˇ@60/85
only
ˇ ˇ
1280*1024@60/75/85 ˇ ˇ+120R ˇ+120R
1360*768@60/120R ˇ ˇ ˇ
1366*768@60/60R ˇ ˇ ˇ
SXGA+1400*1050@60R/
60/75
ˇ ˇ+85/120R ˇ+85/120R
WXGA+1440*900@60R/
60/75/85
ˇ ˇ ˇ
1600*900@60R ˇ ˇ ˇ

13
UXGA1600*1200@60/
65/70/75/85/120R
ˇ@60 only ˇ ˇ
WSXGA1680*1050@60/
60R/75/85/120R
ˇ@60CVT/
60 only
ˇ ˇ
1792*1366@60/75 ˇ ˇ
1856*1392@60/75 ˇ ˇ
1920*1080@60 ˇ ˇ ˇ
1920*1200
(@60R/60/75Hz)
ˇ@60R
only
ˇ ˇ
1920*1440@60 ˇ
720*480I/P ˇ
720*576I/P ˇ
720I/P@24/25/30/50/60 ˇ
1080I@50/60 ˇ
1080P@24 ˇ
2048*1080@@50/60 ˇ ˇ ˇ
2048*1152@@60R ˇ ˇ ˇ
2560*1600@60R ˇ ˇ

14
10.2 Output Resolution
640*480
800*600
1024*768
1280*1024
1600*1200
1920*1200@60RB
720*480P
1280*720P(Default)
1920*1080P
Note: When output timing is set to 'By Native' yet the timing does not
match the built-in support timing,output timing will set to defualt at
1280*720p automatically.

15
11. ACRONYMS
ACRONYM COMPLETE TERM
HDMI High-Denition Multimedia Interface

Home page: http://www.cypress.com.tw
CYPRESS TECHNOLOGY CO., LTD
20121217 MPM-CS802D