Cyp Ca-hdmi50r User manual

HDMI Over CAT5

Receiver

at 50 Meters

Operation Manual

CA-HDMI50R

1. Introduction

This is the receiver (Rx) unit of HDMI over CAT5 Tx/Rx solution, works with HDMI

over CAT5 transmitter, can extend HDMI signal through CAT-5 cables for a

distance up to 50 meters. The installation of HDMI Over CAT5 is easy and quick,

simply place the transmitter next to your HDTV source such as a DVD player,

then place this unit next to your display, and get all necessary cables

connected to complete and enjoy.

2. Features

1. Compliant with HDMI 1.2, HDCP 1.1 and DVI 1.0 specifications.

2. Supports CAT-5/CAT-5E/CAT-6 cables of variable types.

3. Supports high definition input up to 1080P, output resolution follows input.

4. Easy to install and simple to operate.

3. Package Contents

1. HDMI Over CAT5 Receiver at 50 Meters

2. 5VDC Power Supply Adaptor

3. Operation Manual

6. Connection and Installation

HDMI

Cable

HDMI

Display

HDMI

DDC (CAT-5 Cable)

50 Meters

VIDEO (CAT-5 Cable)

Transmitter Unit

Front

Receiver Unit

Front

Transmitter Unit

Rear

Receiver Unit

Rear

VIDEO DDC DC 5V

CAT5 OUTPUT

HDMI to CAT 5

HDMI INPUT

CAT5to HDMI 50

HDMI OUTPUT

DDC VIDEO DC 5V

CAT5 INPUT

DVD Player

HDMI

Cable

HDMI

STB

HDMI

Cable

HDMI

5. Specifications

4.2 Rear Panel

4. Operation Controls and Functions

4.1 Front Panel

1 HDMI OUTPUT:

Connect the HDMI output port to the HDMI input of your display.

CAT5to HDMI 50

HDMI OUTPUT

1 2 3

DDC VIDEO DC 5V

CAT5 INPUT

1 DDC INPUT:

Connect the DDC input to the DDC output of the transmitter unit using

CAT-5/CAT-5E/CAT-6 cable.

Note: For advanced user only, if it's known that the DDC or HDCP data are

required for the source and the display, you can use a single CAT-5 cable

for the VIDEO connection only.

2 VIDEO INPUT:

Connect the VIDEO input to the VIDEO output of the transmitter unit using

CAT-5/CAT-5E/CAT-6 cable.

3 Power:

Plug the 5VDC power supply into the unit and connect the adaptor to AC

wall outlet.

1. Supported resolutions: HDMI - 480i/480p, 576i/576p, 720P@50/60Hz,

1080i@50/60Hz, 1080p@50/60Hz

2. Input: 1* CAT-5 input for VIDEO, 1* CAT-5 input for DDC

3. Output: 1* HDMI female port

4. Power: 5V / 2.6A DC power supply

5. Dimensions: 123(W) x 125(D) x 30(H)mm

6. Weight: 700g

TABLE OF CONTENTS

1. Introduction................................................................................ 1

2. Features...................................................................................... 1

3. Package Contents.................................................................... 1

4. Operation Controls and Functions........................................... 2

4.1 Front Panel........................................................................... 2

4.2 Rear Panel........................................................................... 2

5. Specifications............................................................................ 3

6. Connection and Installation.................................................... 4

5. Specifications

4.2 Rear Panel

4. Operation Controls and Functions

4.1 Front Panel

1 HDMI OUTPUT:

Connect the HDMI output port to the HDMI input of your display.

CAT5to HDMI 50

HDMI OUTPUT

1 2 3

DDC VIDEO DC 5V

CAT5 INPUT

1 DDC INPUT:

Connect the DDC input to the DDC output of the transmitter unit using

CAT-5/CAT-5E/CAT-6 cable.

Note: For advanced user only, if it's known that the DDC or HDCP data are

required for the source and the display, you can use a single CAT-5 cable

for the VIDEO connection only.

2 VIDEO INPUT:

Connect the VIDEO input to the VIDEO output of the transmitter unit using

CAT-5/CAT-5E/CAT-6 cable.

3 Power:

Plug the 5VDC power supply into the unit and connect the adaptor to AC

wall outlet.

1. Supported resolutions: HDMI - 480i/480p, 576i/576p, 720P@50/60Hz,

1080i@50/60Hz, 1080p@50/60Hz

2. Input: 1* CAT-5 input for VIDEO, 1* CAT-5 input for DDC

3. Output: 1* HDMI female port

4. Power: 5V / 2.6A DC power supply

5. Dimensions: 123(W) x 125(D) x 30(H)mm

6. Weight: 700g

1. Introduction

This is the receiver (Rx) unit of HDMI over CAT5 Tx/Rx solution, works with HDMI

over CAT5 transmitter, can extend HDMI signal through CAT-5 cables for a

distance up to 50 meters. The installation of HDMI Over CAT5 is easy and quick,

simply place the transmitter next to your HDTV source such as a DVD player,

then place this unit next to your display, and get all necessary cables

connected to complete and enjoy.

2. Features

1. Compliant with HDMI 1.2, HDCP 1.1 and DVI 1.0 specifications.

2. Supports CAT-5/CAT-5E/CAT-6 cables of variable types.

3. Supports high definition input up to 1080P, output resolution follows input.

4. Easy to install and simple to operate.

3. Package Contents

1. HDMI Over CAT5 Receiver at 50 Meters

2. 5VDC Power Supply Adaptor

3. Operation Manual

5. Specifications

4.2 Rear Panel

4. Operation Controls and Functions

4.1 Front Panel

1 HDMI OUTPUT:

Connect the HDMI output port to the HDMI input of your display.

CAT5to HDMI 50

HDMI OUTPUT

1 2 3

DDC VIDEO DC 5V

CAT5 INPUT

1 DDC INPUT:

Connect the DDC input to the DDC output of the transmitter unit using

CAT-5/CAT-5E/CAT-6 cable.

Note: For advanced user only, if it's known that the DDC or HDCP data are

required for the source and the display, you can use a single CAT-5 cable

for the VIDEO connection only.

2 VIDEO INPUT:

Connect the VIDEO input to the VIDEO output of the transmitter unit using

CAT-5/CAT-5E/CAT-6 cable.

3 Power:

Plug the 5VDC power supply into the unit and connect the adaptor to AC

wall outlet.

1. Supported resolutions: HDMI - 480i/480p, 576i/576p, 720P@50/60Hz,

1080i@50/60Hz, 1080p@50/60Hz

2. Input: 1* CAT-5 input for VIDEO, 1* CAT-5 input for DDC

3. Output: 1* HDMI female port

4. Power: 5V / 2.6A DC power supply

5. Dimensions: 123(W) x 125(D) x 30(H)mm

6. Weight: 700g